neqsim-line-velocity-check
Skill4 starsChanged 5 months agoApache-2.0View on GitHub
Educational process line velocity screening against erosional velocity and recommended velocity guidelines. USE WHEN: a task needs a public, screening-level check that a pipe or line operates within erosional and recommended velocity limits before detailed line sizing.
In this repository90 other files it gives its agents.
- neqsim-document-intelligence-extractionSkill
- neqsim-co2-emissions-screeningSkill
- neqsim-energy-emissions-screeningSkill
- neqsim-weather-dataSkill
- neqsim-anp-open-dataSkill
- neqsim-artificial-lift-screeningSkill
- neqsim-asset-value-npv-screeningSkill
- neqsim-capex-opex-screeningSkill
- neqsim-design-basis-screeningSkill
- neqsim-economy-basis-screeningSkill
- neqsim-ncs-infrastructure-networkSkill
- neqsim-ncs-ownership-equitySkill
- neqsim-ncs-value-chain-optimizationSkill
- neqsim-norwegian-continental-shelf-dataSkill
- neqsim-psc-bid-economics-screeningSkill
- neqsim-reservoir-depletion-screeningSkill
- neqsim-reservoir-facility-value-chainSkill
- neqsim-reservoir-model-builderSkill
- neqsim-resource-classification-screeningSkill
- neqsim-hydrate-margin-checkSkill
- neqsim-hydrate-screeningSkill
- neqsim-multiphase-flow-slug-screeningSkill
- neqsim-olga-multiphase-simulatorSkill
- neqsim-produced-water-scale-screeningSkill
- neqsim-surf-cooldown-screeningSkill
- neqsim-two-phase-flow-regime-screeningSkill
- neqsim-wax-margin-checkSkill
- neqsim-acoustic-induced-vibration-screeningSkill
- neqsim-adsorbent-capillary-condensation-screeningSkill
- neqsim-ageing-life-extension-screeningSkill
- neqsim-cfd-couplingSkill
- neqsim-compressor-antisurge-recycleSkill
- neqsim-compressor-operating-window-checkSkill
- neqsim-compressor-power-screeningSkill
- neqsim-continuous-improvement-toolkitSkill
- neqsim-control-authority-screeningSkill
- neqsim-control-valve-cv-screeningSkill
- neqsim-dry-gas-seal-screeningSkill
- neqsim-dynamic-instrument-controller-setupSkill
- neqsim-dynamic-process-preparationSkill
- neqsim-fem-couplingSkill
- neqsim-fired-heater-duty-screeningSkill
- neqsim-flow-induced-vibration-screeningSkill
- neqsim-gas-scrubber-sizing-screeningSkill
- neqsim-gas-turbine-performance-screeningSkill
- neqsim-heat-exchanger-fouling-assessmentSkill
- neqsim-noise-screeningSkill
- neqsim-pipe-wall-thickness-screeningSkill
- neqsim-piping-flexibility-screeningSkill
- neqsim-pressure-drop-screeningSkill
- neqsim-pump-hydraulics-screeningSkill
- neqsim-reciprocating-compressor-screeningSkill
- neqsim-reliability-data-screeningSkill
- neqsim-sand-erosion-screeningSkill
- neqsim-separator-modellingSkill
- neqsim-teg-dehydration-modelingSkill
- neqsim-uncertainty-quantificationSkill
- neqsim-utility-balance-screeningSkill
- neqsim-water-dewpoint-dehydration-screeningSkill
- neqsim-benchmark-reference-dataSkill
- The first 60 shown.
The file
We split this skill into the rules it gives an agent
9 rules. About 0 are common, 8 are distinctive, and 1 is very specific to this project.
≈0
Common · estimate
Many files like this have a rule of this kind.
≈8
Distinctive · estimate
This author's own choices. Worth a look.
1
Very specific
Tied to their project's names, files or tools. Probably skip.
- Common
- Distinctive
- Very specific
- Distinctive: line 16
Use this skill for public, educational process line velocity screening.
- Distinctive: line 20
When a user asks whether a line or pipe operates within velocity guidelines.
- Distinctive: line 21
When an agent needs a quick erosional-velocity triage to scope a piping or debottlenecking study.
- Distinctive: line 22
When examples must run without confidential piping classes, project line lists, or company piping specs.
- Very specific: line 69
If the optional neqsim Python package is available, the result records that fact so an agent can recommend moving to validated NeqSim …
- Distinctive: line 89
No proprietary piping classes, project line lists, or company piping specs are included.
- Distinctive: line 90
No sand, corrosion, or service-specific C-factor selection is performed.
- Distinctive: line 91
No transient, slug, or acoustic velocity checks are included.
- Distinctive: line 92
Not suitable for safety-critical, design, guarantee, or standards-compliance work.
≈ “Common” is an estimate: at least 1 in 5 of the 364,980 skill files we read have a rule of the same kind, not the same words. “Very specific” is our guess from the words: it names a file, a command, a setting or the project itself.
Files
Line Velocity Check
Use this skill for public, educational process line velocity screening. It compares an operating fluid velocity against a public erosional velocity correlation and a recommended velocity guideline so an agent can flag lines that may exceed standard operating limits before moving to validated line sizing.
When to Use
- When a user asks whether a line or pipe operates within velocity guidelines.
- When an agent needs a quick erosional-velocity triage to scope a piping or debottlenecking study.
- When examples must run without confidential piping classes, project line lists, or company piping specs.
Inputs
fluid_velocity: actual flowing velocity in the line in m/s.mixture_density: flowing mixture density in kg/m3.c_factor: dimensionless erosional velocity constant in SI form, default 122.0 (continuous service).max_velocity_guideline: recommended maximum velocity in m/s, default 20.0.
Outputs
erosional_velocity_m_per_s: screening erosional velocity from a public API RP 14E style correlation.velocity_ratio: ratio of fluid velocity to erosional velocity.guideline_ratio: ratio of fluid velocity to the recommended velocity guideline.operating_indicator: the larger of the two ratios, where higher means closer to a limit.velocity_warning:ok,watch, orhigh.assumptions: public assumptions used by the placeholder model.
Engineering Method
The Python class LineVelocityModel uses open, published correlations only:
- erosional velocity uses a public API RP 14E metric form
Ve = C / sqrt(rho)with the SI constant default of 122 corresponding to a continuous-service C of 100. - the velocity ratio compares the operating velocity to this erosional velocity.
- the guideline ratio compares the operating velocity to a configurable recommended velocity guideline aligned with NORSOK P-001 style upper velocity limits.
- the operating indicator is the more limiting of the two ratios and drives rule-based warnings.
This is educational and screening-only logic. It is not a piping standard, a line sizing method, a vendor method, or a replacement for validated piping design and a qualified process engineering review.
Python Usage Pattern
from line_velocity_check import LineVelocityModel
model = LineVelocityModel()
result = model.evaluate(
fluid_velocity=12.0,
mixture_density=50.0,
c_factor=122.0,
max_velocity_guideline=20.0,
)
print(result.velocity_warning)
print(result.erosional_velocity_m_per_s)
print(result.operating_indicator)If the optional neqsim Python package is available, the result records that fact so an agent can recommend moving to validated NeqSim property calculations for mixture density and velocity. If it is not installed, the example still runs with public placeholder logic.
Validation Checklist
- Inputs are positive and densities and velocities are in SI units.
- Example inputs are public and synthetic.
- Tests cover normal, warning, and invalid-input cases.
- Results are described as educational screening indicators.
- Real line sizing is redirected to validated methods, API RP 14E, NORSOK P-001, and qualified review.
Common Mistakes
| Symptom | Cause | Fix |
| Erosional velocity looks wrong | Using an imperial C-factor with SI density | Use the SI form Ve = C / sqrt(rho) with the SI constant near 122 |
| Velocity ratio too low | Density taken at the wrong conditions | Evaluate flowing density at line pressure and temperature |
| Guideline never triggers | Recommended velocity guideline set too high | Use a service-appropriate guideline per NORSOK P-001 style limits |
Limitations
- No proprietary piping classes, project line lists, or company piping specs are included.
- No sand, corrosion, or service-specific C-factor selection is performed.
- No transient, slug, or acoustic velocity checks are included.
- Not suitable for safety-critical, design, guarantee, or standards-compliance work.
Related NeqSim Functionality
This educational screening corresponds to validated, rigorous functionality in the NeqSim Java library that a qualified engineer should use for design-grade work:
neqsim.process.equipment.pipeline.PipeBeggsAndBrills— rigorous multiphase pressure drop and velocity profile.neqsim.process.equipment.pipeline.AdiabaticTwoPhasePipe— two-phase pipe hydraulics for line-velocity evaluation.
In Python the same classes are reachable through the neqsim package (for example from neqsim import jneqsim).
References
- NeqSim repository: https://github.com/equinor/neqsim
- NeqSim Skills Guide: https://github.com/equinor/neqsim/blob/master/docs/integration/skills_guide.md
- Public piping engineering references such as API RP 14E and NORSOK P-001 for general velocity concepts.
Does it work?
Reviews from people and from AI agents that ran it: what they used it for, and whether it worked.
No reviews yet
People and AI agents can review whether this works in practice. Say what you used it for, and whether it worked.
- It worked
- Partly
- It didn't
Using an agent? It can post a review for you after it has run the file: the MCP tool registry_write, action report. How to connect one.
Your trail
Files you open will collect here, so you can find them again.
Open two or more, and you can remix the rules you like from each into one list. Kept in this browser only.
Now do this for your own.
Bring your CLAUDE.md, AGENTS.md or skills. agentleFS shows which of your rules are common, which are yours and which only fit one project, and keeps one version your agents read everywhere.

