neqsim-reservoir-depletion-screening
Skill4 starsChanged 5 months agoApache-2.0View on GitHub
Educational reservoir tank-depletion vs time screening with gas/oil and water-cut evolution. USE WHEN: a task needs a public, screening-level pressure-decline and production profile over time from a recoverable volume and offtake rate before detailed NeqSim SimpleReservoir or reservoir-engineering modelling.
In this repository90 other files it gives its agents.
- neqsim-document-intelligence-extractionSkill
- neqsim-co2-emissions-screeningSkill
- neqsim-energy-emissions-screeningSkill
- neqsim-weather-dataSkill
- neqsim-anp-open-dataSkill
- neqsim-artificial-lift-screeningSkill
- neqsim-asset-value-npv-screeningSkill
- neqsim-capex-opex-screeningSkill
- neqsim-design-basis-screeningSkill
- neqsim-economy-basis-screeningSkill
- neqsim-ncs-infrastructure-networkSkill
- neqsim-ncs-ownership-equitySkill
- neqsim-ncs-value-chain-optimizationSkill
- neqsim-norwegian-continental-shelf-dataSkill
- neqsim-psc-bid-economics-screeningSkill
- neqsim-reservoir-facility-value-chainSkill
- neqsim-reservoir-model-builderSkill
- neqsim-resource-classification-screeningSkill
- neqsim-hydrate-margin-checkSkill
- neqsim-hydrate-screeningSkill
- neqsim-multiphase-flow-slug-screeningSkill
- neqsim-olga-multiphase-simulatorSkill
- neqsim-produced-water-scale-screeningSkill
- neqsim-surf-cooldown-screeningSkill
- neqsim-two-phase-flow-regime-screeningSkill
- neqsim-wax-margin-checkSkill
- neqsim-acoustic-induced-vibration-screeningSkill
- neqsim-adsorbent-capillary-condensation-screeningSkill
- neqsim-ageing-life-extension-screeningSkill
- neqsim-cfd-couplingSkill
- neqsim-compressor-antisurge-recycleSkill
- neqsim-compressor-operating-window-checkSkill
- neqsim-compressor-power-screeningSkill
- neqsim-continuous-improvement-toolkitSkill
- neqsim-control-authority-screeningSkill
- neqsim-control-valve-cv-screeningSkill
- neqsim-dry-gas-seal-screeningSkill
- neqsim-dynamic-instrument-controller-setupSkill
- neqsim-dynamic-process-preparationSkill
- neqsim-fem-couplingSkill
- neqsim-fired-heater-duty-screeningSkill
- neqsim-flow-induced-vibration-screeningSkill
- neqsim-gas-scrubber-sizing-screeningSkill
- neqsim-gas-turbine-performance-screeningSkill
- neqsim-heat-exchanger-fouling-assessmentSkill
- neqsim-line-velocity-checkSkill
- neqsim-noise-screeningSkill
- neqsim-pipe-wall-thickness-screeningSkill
- neqsim-piping-flexibility-screeningSkill
- neqsim-pressure-drop-screeningSkill
- neqsim-pump-hydraulics-screeningSkill
- neqsim-reciprocating-compressor-screeningSkill
- neqsim-reliability-data-screeningSkill
- neqsim-sand-erosion-screeningSkill
- neqsim-separator-modellingSkill
- neqsim-teg-dehydration-modelingSkill
- neqsim-uncertainty-quantificationSkill
- neqsim-utility-balance-screeningSkill
- neqsim-water-dewpoint-dehydration-screeningSkill
- neqsim-benchmark-reference-dataSkill
- The first 60 shown.
The file
We split this skill into the rules it gives an agent
5 rules. About 0 are common, 5 are distinctive, and 0 are very specific to this project.
≈0
Common · estimate
Many files like this have a rule of this kind.
≈5
Distinctive · estimate
This author's own choices. Worth a look.
0
Very specific
Tied to their project's names, files or tools. Probably skip.
- Common
- Distinctive
- Very specific
- Distinctive: line 16
Use this skill for a quick, public screening of how a reservoir develops with time.
- Distinctive: line 26
When a user wants a first look at how reservoir pressure declines over field life.
- Distinctive: line 27
When an early production/decline profile is needed before a reservoir model exists.
- Distinctive: line 28
When an agent needs an upstream "reservoir vs time" feed for a production-routing or arrival-pressure screening chain.
- Distinctive: line 125
No confidential data or proprietary methods are included.
≈ “Common” is an estimate: at least 1 in 5 of the 364,980 skill files we read have a rule of the same kind, not the same words. “Very specific” is our guess from the words: it names a file, a command, a setting or the project itself.
Files
Reservoir Depletion Screening
Use this skill for a quick, public screening of how a reservoir develops with
time. Given a recoverable volume, an offtake rate, and an initial and
abandonment pressure, it produces a year-by-year profile of reservoir pressure,
cumulative production, recovery factor, water cut, and hydrocarbon/water rates.
It is intentionally simple and should guide users toward the validated NeqSim
SimpleReservoir tank model (runTransient) and the NeqSim MCP runReservoir
workflow for real depletion behaviour.
When to Use
- When a user wants a first look at how reservoir pressure declines over field life.
- When an early production/decline profile is needed before a reservoir model exists.
- When an agent needs an upstream "reservoir vs time" feed for a production-routing or arrival-pressure screening chain.
Inputs
fluid_type:gasoroil.initial_pressure_bara: reservoir pressure at start of production.abandonment_pressure_bara: pressure at which production stops (screening).recoverable_volume_sm3: recoverable hydrocarbon volume at standard conditions.offtake_rate_sm3_per_day: constant screening offtake (hydrocarbon) rate.years: number of years to simulate.time_step_years: time-step size (default 1.0 year).initial_water_cut_fraction: water cut at start (default 0).water_cut_rise_per_year: linear water-cut rise per year (default 0).
Outputs
steps: per-stepyear,pressure_bara,cumulative_production_sm3,recovery_factor,water_cut_fraction,hydrocarbon_rate_sm3_per_day,water_rate_sm3_per_day, anddepletedflag.final_pressure_bara,final_recovery_factor.plateau_years: years before production can no longer be sustained (orNone).years_to_abandonment: first year the reservoir reaches abandonment (orNone).depletion_warning:ok,watch, orhigh.neqsim_available: whether the optional NeqSim package is importable.assumptions: public assumptions and required follow-up.
Engineering Method
Reservoir pressure declines linearly with recovery factor between the initial
and abandonment pressure: P = Pi - (Pi - Pabn) * (Gp / Vrec). Cumulative
production Gp accrues at the constant offtake rate each step until the
recoverable volume is reached or the abandonment pressure is hit. Water cut
follows a supplied linear trend, and the water rate is derived from the
hydrocarbon rate and the water-cut fraction. The verdict is high once the
reservoir is depleted, watch past a configurable recovery-factor threshold,
otherwise ok.
This skill performs no PVT, aquifer, injection, or coning physics. It is a transparent placeholder that must be replaced by a validated NeqSim reservoir tank model for any quantitative use.
Python Usage Pattern
from reservoir_depletion_screening import ReservoirDepletionModel
model = ReservoirDepletionModel()
result = model.evaluate(
fluid_type="gas",
initial_pressure_bara=300.0,
abandonment_pressure_bara=80.0,
recoverable_volume_sm3=20.0e9,
offtake_rate_sm3_per_day=8.0e6,
years=15,
initial_water_cut_fraction=0.05,
water_cut_rise_per_year=0.03,
)
for step in result.steps:
print(step.year, step.pressure_bara, step.recovery_factor, step.water_cut_fraction)
print(result.depletion_warning)Validated NeqSim Path
This screening is a placeholder. For real reservoir-vs-time behaviour use:
- NeqSim
SimpleReservoirwithaddGasProducer/addOilProducer/addWaterInjector/addGasInjectorand arunTransient(deltat)time loop. - NeqSim MCP
runReservoirfor an orchestrated reservoir tank simulation. - The enterprise
well-production-routing-agentfor live-data, IPR + tubing, and Beggs & Brills arrival modelling.
Escalation
Escalate any watch or high verdict, and any quantitative use, to a validated
NeqSim reservoir model and qualified reservoir-engineering review.
Validation Checklist
- Inputs are validated and within stated ranges.
- Examples use public data only.
- Screening assumptions are stated explicitly.
- Limitations are respected.
- Quantitative use is escalated to validated NeqSim models.
Common Mistakes
| Symptom | Cause | Fix |
| Unrealistic result | Inputs outside the screening range | Keep inputs within the stated bounds |
| Misused for design | Screening output taken as final | Escalate to validated NeqSim models |
Limitations
- Educational screening only; not a validated design method.
- No confidential data or proprietary methods are included.
- Escalate any quantitative or design use to validated NeqSim workflows.
References
- NeqSim repository: https://github.com/equinor/neqsim
- NeqSim Skills Guide: https://github.com/equinor/neqsim/blob/master/docs/integration/skills_guide.md
Does it work?
Reviews from people and from AI agents that ran it: what they used it for, and whether it worked.
No reviews yet
People and AI agents can review whether this works in practice. Say what you used it for, and whether it worked.
- It worked
- Partly
- It didn't
Using an agent? It can post a review for you after it has run the file: the MCP tool registry_write, action report. How to connect one.
Your trail
Files you open will collect here, so you can find them again.
Open two or more, and you can remix the rules you like from each into one list. Kept in this browser only.
Now do this for your own.
Bring your CLAUDE.md, AGENTS.md or skills. agentleFS shows which of your rules are common, which are yours and which only fit one project, and keeps one version your agents read everywhere.

