FreeRTOS

Purpose

Guide agents through FreeRTOS application development: task creation and priorities, inter-task communication with queues and semaphores, stack overflow detection, configASSERT, and FreeRTOS-aware debugging with GDB and OpenOCD.

Triggers

• "How do I create a FreeRTOS task?"
• "How do I pass data between FreeRTOS tasks?"
• "My FreeRTOS task is crashing — how do I detect stack overflow?"
• "How do I use FreeRTOS mutexes?"
• "How do I debug FreeRTOS tasks with GDB?"
• "How do I configure FreeRTOSConfig.h?"

Workflow

1. Task creation and priorities

#include "FreeRTOS.h"
#include "task.h"

// Task function signature
void vMyTask(void *pvParameters) {
    const char *name = (const char *)pvParameters;
    for (;;) {
        // Task body — must never return
        printf("Task %s running\n", name);
        vTaskDelay(pdMS_TO_TICKS(500));  // yield for 500ms
    }
}

int main(void) {
    // xTaskCreate(function, name, stack_depth_words, param, priority, handle)
    TaskHandle_t xHandle = NULL;
    xTaskCreate(vMyTask, "MyTask",
                configMINIMAL_STACK_SIZE + 128,  // words, not bytes!
                (void *)"sensor",
                tskIDLE_PRIORITY + 2,            // higher = more urgent
                &xHandle);

    vTaskStartScheduler();  // never returns if heap is sufficient
    for (;;);               // should never reach here
}

Priority guidelines:

• tskIDLE_PRIORITY (0) — idle task, never block here
• ISR-deferred tasks — highest priority to service interrupts quickly
• Avoid priorities above configMAX_PRIORITIES - 1

2. Queues — inter-task data passing

#include "queue.h"

typedef struct { uint32_t sensor_id; float value; } SensorReading_t;

QueueHandle_t xSensorQueue;

void vProducerTask(void *pvParam) {
    SensorReading_t reading;
    for (;;) {
        reading.sensor_id = 1;
        reading.value = read_adc();
        // Send; block max 10ms if queue full
        xQueueSend(xSensorQueue, &reading, pdMS_TO_TICKS(10));
        vTaskDelay(pdMS_TO_TICKS(100));
    }
}

void vConsumerTask(void *pvParam) {
    SensorReading_t reading;
    for (;;) {
        // Block forever until item available
        if (xQueueReceive(xSensorQueue, &reading, portMAX_DELAY) == pdTRUE) {
            process(reading.value);
        }
    }
}

// Create before starting scheduler
xSensorQueue = xQueueCreate(10, sizeof(SensorReading_t));

From ISR: use xQueueSendFromISR() and pass &xHigherPriorityTaskWoken.

3. Semaphores and mutexes

#include "semphr.h"

// Binary semaphore — signaling (ISR→task)
SemaphoreHandle_t xSem = xSemaphoreCreateBinary();

void UART_ISR(void) {
    BaseType_t xWoken = pdFALSE;
    xSemaphoreGiveFromISR(xSem, &xWoken);
    portYIELD_FROM_ISR(xWoken);
}

void vUartTask(void *p) {
    for (;;) {
        xSemaphoreTake(xSem, portMAX_DELAY);
        // process received data
    }
}

// Mutex — mutual exclusion (NOT from ISR)
SemaphoreHandle_t xMutex = xSemaphoreCreateMutex();

void vCriticalSection(void) {
    if (xSemaphoreTake(xMutex, pdMS_TO_TICKS(100)) == pdTRUE) {
        // protected access
        shared_resource++;
        xSemaphoreGive(xMutex);
    }
}

// Recursive mutex (same task can take multiple times)
SemaphoreHandle_t xRecursive = xSemaphoreCreateRecursiveMutex();
xSemaphoreTakeRecursive(xRecursive, portMAX_DELAY);
xSemaphoreGiveRecursive(xRecursive);

Use mutex (not binary semaphore) for shared resources to get priority inheritance.

4. Stack overflow detection

// FreeRTOSConfig.h
#define configCHECK_FOR_STACK_OVERFLOW  2  // Method 2 (pattern + watermark)
#define configUSE_MALLOC_FAILED_HOOK    1

// Implement the hook (called when overflow detected)
void vApplicationStackOverflowHook(TaskHandle_t xTask, char *pcTaskName) {
    // Log the offending task name, then halt
    configASSERT(0);  // triggers assertion failure
}

void vApplicationMallocFailedHook(void) {
    configASSERT(0);
}

Check watermarks at runtime:

// Returns minimum ever free stack words
UBaseType_t uxHighWaterMark = uxTaskGetStackHighWaterMark(xHandle);
printf("Stack headroom: %lu words\n", uxHighWaterMark);
// Rule of thumb: keep headroom > 20 words

5. Essential FreeRTOSConfig.h settings

// FreeRTOSConfig.h — adapt to your MCU
#define configCPU_CLOCK_HZ              (SystemCoreClock)
#define configTICK_RATE_HZ              1000          // 1ms tick
#define configMAX_PRIORITIES            8
#define configMINIMAL_STACK_SIZE        128           // words
#define configTOTAL_HEAP_SIZE           (16 * 1024)  // bytes
#define configMAX_TASK_NAME_LEN         16

// Debug / safety
#define configUSE_TRACE_FACILITY        1
#define configUSE_STATS_FORMATTING_FUNCTIONS  1
#define configCHECK_FOR_STACK_OVERFLOW  2
#define configUSE_MALLOC_FAILED_HOOK    1
#define configASSERT(x) if((x)==0) { taskDISABLE_INTERRUPTS(); for(;;); }

// Features
#define configUSE_MUTEXES               1
#define configUSE_RECURSIVE_MUTEXES     1
#define configUSE_COUNTING_SEMAPHORES   1
#define configUSE_TIMERS                1
#define configTIMER_TASK_STACK_DEPTH    (configMINIMAL_STACK_SIZE * 2)

6. GDB debugging with OpenOCD

# Connect GDB with FreeRTOS thread awareness
# OpenOCD provides FreeRTOS-aware RTOS plugin

# openocd.cfg addition
# source [find rtos/FreeRTOS.cfg]  # auto-loads with most targets

# GDB session
(gdb) info threads          # lists all FreeRTOS tasks
(gdb) thread 3              # switch to task 3
(gdb) bt                    # backtrace of that task's stack
(gdb) frame 2               # inspect specific frame

# Print task list from GDB (if trace facility enabled)
(gdb) call vTaskList(buf)
(gdb) printf "%s\n", buf

7. FreeRTOS v11 API updates

FreeRTOS v11 (2024+) extends task notifications and stream buffers:

// Task notifications v2 — 32-bit values with action semantics
xTaskNotifyIndexed(xHandle, 0, ulValue, eSetValueWithOverwrite);
xTaskNotifyWaitIndexed(0, 0, ULONG_MAX, &ulNotified, portMAX_DELAY);

// Stream buffers — ISR-safe send with trigger level
xStreamBufferSend(xStream, data, len, 0);
xStreamBufferSetTriggerLevel(xStream, 1);  // wake receiver on 1 byte

Check FreeRTOS.h tskKERNEL_VERSION_NUMBER at compile time for API availability.

8. ARM TrustZone integration

Secure/non-secure world split on Cortex-M33/M55:

#include "secure_context.h"

// Initialize secure context management (secure side or NSC veneer)
SecureContext_Init();

// Allocate secure context for task calling secure functions
xTaskCreateSecure(vSecureTask, "SecTask", STACK, NULL, priority, &xHandle);

// MPU defines NSC (Non-Secure Callable) regions for SG veneers

Requires TrustZone-enabled MCU, secure firmware partition, and NSC linker section placement.

9. FreeRTOS+TCP basics

#include "FreeRTOS_IP.h"
#include "FreeRTOS_Sockets.h"

// After network stack init (FreeRTOS_IPInit)
Socket_t xSocket = FreeRTOS_socket(FREERTOS_AF_INET, FREERTOS_SOCK_STREAM,
                                   FREERTOS_IPPROTO_TCP);
FreeRTOS_connect(xSocket, &xAddress, sizeof(xAddress));
FreeRTOS_send(xSocket, buffer, len, 0);

Configure buffer counts and TCP/IP options in FreeRTOSIPConfig.h (e.g., ipconfigUSE_TCP, ipconfigNUM_NETWORK_BUFFER_DESCRIPTORS). Pairs with an Ethernet MAC driver and FreeRTOS+TCP buffer management.

10. MPU region configuration

// Restricted task with MPU regions (Cortex-M with MPU)
static const TaskParameters_t xRestrictedTaskParams = {
    .pvTaskCode = vRestrictedTask,
    .pcName = "Restricted",
    .usStackDepth = configMINIMAL_STACK_SIZE,
    .pvParameters = NULL,
    .uxPriority = tskIDLE_PRIORITY + 1,
    .puxStackBuffer = stackBuffer,
    .xRegions = {
        { .pvBaseAddress = 0x20000000, .ulLength = 0x10000,
          .ulParameters = tskMPU_REGION_READ_ONLY | tskMPU_REGION_EXECUTE_NEVER },
        { .pvBaseAddress = 0x00000000, .ulLength = 0, .ulParameters = 0 }  // terminator
    }
};
xTaskCreateRestricted(&xRestrictedTaskParams, &xHandle);

Define separate RAM regions for read-only code/data, privileged peripherals, and task-private stacks.

For OpenOCD setup details, see skills/embedded/openocd-jtag. For FreeRTOSConfig.h reference, see references/freertos-config.md.

Related skills

• Use skills/embedded/openocd-jtag for GDB/OpenOCD remote debugging setup
• Use skills/embedded/linker-scripts for placing FreeRTOS heap in specific RAM regions
• Use skills/debuggers/gdb for general GDB session management
• Use skills/embedded/zephyr for an alternative RTOS with built-in device management