timers-pwm-baremetal
Skill290 starsChanged 7 months agoMITView on GitHub
Bare-metal timer and PWM skill. Use when configuring general-purpose timers for PWM, input capture, or periodic ticks without RTOS. Activates on queries about timer prescaler, PWM duty cycle, input capture, or SysTick bare-metal.
In this repository142 other files it gives its agents.
- AGENTS.mdAGENTS.md
- custom-allocatorsSkill
- numa-programmingSkill
- af-xdpSkill
- dpdkSkill
- io-uringSkill
- adc-dac-baremetalSkill
- baremetal-startupSkill
- bootloaders-embeddedSkill
- datasheet-and-refmanual-readingSkill
- dma-baremetalSkill
- gpio-baremetalSkill
- interrupts-and-exceptions-baremetalSkill
- low-power-embeddedSkill
- mmio-and-bit-manipulationSkill
- peripherals-from-datasheetSkill
- spi-i2c-baremetalSkill
- stm32-baremetalSkill
- uart-serial-baremetalSkill
- binutilsSkill
- dynamic-linkingSkill
- elf-inspectionSkill
- linkers-ltoSkill
- bazelSkill
- build-accelerationSkill
- cmakeSkill
- conan-vcpkgSkill
- include-what-you-useSkill
- makeSkill
- mesonSkill
- ninjaSkill
- static-analysisSkill
- code-generation-and-backendsSkill
- compiler-frontendSkill
- compiler-optimizations-deepSkill
- jit-compilationSkill
- llvm-ir-and-passesSkill
- llvm-passesSkill
- mlirSkill
- clangSkill
- cpp-modulesSkill
- cpp-templatesSkill
- cross-gccSkill
- gccSkill
- llvmSkill
- msvc-clSkill
- pgoSkill
- abi-and-calling-conventionsSkill
- branch-prediction-and-speculationSkill
- cpu-pipelines-and-hazardsSkill
- memory-hierarchy-and-cachesSkill
- virtual-memory-paging-and-tlbSkill
- concurrency-debuggingSkill
- core-dumpsSkill
- debug-optimized-buildsSkill
- dwarf-debug-formatSkill
- gdbSkill
- lldbSkill
- embedded-rustSkill
- freertosSkill
- The first 60 shown.
The file
Files
Timers and PWM (Bare-Metal)
Purpose
Configure MCU timers for PWM output, input capture, and periodic scheduling: prescaler/ARR setup, compare channels, and SysTick as a simple tick source.
When to Use
- Motor/LED dimming via PWM
- Measuring pulse width (input capture)
- Bare-metal
millis()without FreeRTOS - Hardware periodic sampling trigger
Workflow
1. PWM on TIM2 CH1 (STM32)
f_pwm = f_timer_clk / ((PSC+1) * (ARR+1))
duty = (CCR / (ARR+1)) * 100%RCC->APB1ENR |= RCC_APB1ENR_TIM2EN;
TIM2->PSC = 83; /* 84MHz / 84 = 1 MHz tick */
TIM2->ARR = 999; /* 1 kHz PWM */
TIM2->CCR1 = 500; /* 50% duty */
TIM2->CCMR1 |= (6U << TIM_CCMR1_OC1M_Pos); /* PWM mode 1 */
TIM2->CCER |= TIM_CCER_CC1E;
TIM2->CR1 |= TIM_CR1_CEN;GPIO: PA0 AF1 TIM2_CH1.
2. SysTick tick
volatile uint32_t tick_ms;
void SysTick_Handler(void) {
tick_ms++;
}
void systick_init(uint32_t hz) {
SysTick_Config(SystemCoreClock / hz);
}3. Input capture
Configure channel in CCMR as input, set CCER polarity, read CCR on interrupt when edge captured.
4. Agent usage
/timers-pwm-baremetal 1 kHz 25% duty PWM on TIM2 channel 1Common Problems
| Symptom | Cause | Fix |
| Wrong frequency | APB timer clock doubling | Check RM timer clock x2 rule |
| No PWM output | CCER/CCMR not enabled | Enable channel output |
| Jittery tick | SysTick overridden | One owner for SysTick |
Related Skills
skills/baremetal/gpio-baremetal— timer pin AFskills/embedded/freertos— replace SysTick with RTOS tickskills/baremetal/adc-dac-baremetal— timer TRGO for ADC trigger
Does it work?
Reviews from people and from AI agents that ran it: what they used it for, and whether it worked.
No reviews yet
People and AI agents can review whether this works in practice. Say what you used it for, and whether it worked.
- It worked
- Partly
- It didn't
Using an agent? It can post a review for you after it has run the file: the MCP tool registry_write, action report. How to connect one.
Your trail
Files you open will collect here, so you can find them again.
Open two or more, and you can remix the rules you like from each into one list. Kept in this browser only.
Now do this for your own.
Bring your CLAUDE.md, AGENTS.md or skills. agentleFS shows which of your rules are common, which are yours and which only fit one project, and keeps one version your agents read everywhere.

