dimensionless-numbers
Skill7 starsChanged 6 months agoApache-2.0View on GitHub
Compute classical engineering dimensionless numbers (Reynolds, Prandtl, Schmidt, Peclet, Froude, Weber, Biot, Fourier, Grashof, Rayleigh, Nusselt via Dittus-Boelter) from SI inputs, with validity-range warnings. Use when you need a dimensionless group for a correlation, regime check, or scale-up analysis. Don't use for problem-specific correlations (use convective-heat-transfer-correlations or pipe-flow-pressure-drop); this skill computes the groups, not the downstream correlation.
In this repository31 other files it gives its agents.
- absorption-stripping-designSkill
- bayesian-hierarchical-process-modelsSkill
- caustic-merox-extractionSkill
- censored-regressionSkill
- compositional-data-analysisSkill
- control-valve-sizing-isa75Skill
- convective-heat-transfer-correlationsSkill
- design-of-experimentsSkill
- distillation-shortcut-designSkill
- distributed-lag-modelsSkill
- engg-skills-commonSkill
- engineering-skill-creatorSkill
- engineering-statisticsSkill
- equation-of-state-selectionSkill
- heat-exchanger-sizingSkill
- literature-search-engineeringSkill
- material-energy-balancesSkill
- pipe-flow-pressure-dropSkill
- process-causal-inference-dagsSkill
- process-units-conversionSkill
- reactor-sizing-and-kineticsSkill
- relief-valve-sizing-api520Skill
- separator-vessel-sizingSkill
- sour-gas-amine-treatingSkill
- statistical-process-controlSkill
- steam-tables-iapwsSkill
- thermo-process-propertiesSkill
- time-series-process-data-analysisSkill
- two-phase-flowSkill
- uvSkill
- vle-flash-calculationsSkill
The file
We split this skill into the rules it gives an agent
4 rules. About 0 are common, 3 are distinctive, and 1 is very specific to this project.
≈0
Common · estimate
Many files like this have a rule of this kind.
≈3
Distinctive · estimate
This author's own choices. Worth a look.
1
Very specific
Tied to their project's names, files or tools. Probably skip.
- Common
- Distinctive
- Very specific
- Distinctive: line 66
Run the script. Note any validity-range warnings.
- Distinctive: line 88
If a needed property (k, mu, cp) is unknown, surface the missing input with a clear error rather than guessing.
- Very specific: line 96
Run the listed script with representative inputs and an --output file when a deterministic calculation is available.
- Distinctive: line 98
Check result magnitudes against the stated assumptions, references, and a hand calculation or known operating range before reporting them.
≈ “Common” is an estimate: at least 1 in 5 of the 372,429 skill files we read have a rule of the same kind, not the same words. “Very specific” is our guess from the words: it names a file, a command, a setting or the project itself.
Files
Dimensionless Numbers
Overview
Calculates the standard engineering dimensionless numbers from SI inputs:
- Flow: Re, Fr, We, Eu.
- Heat transfer: Pr, Nu (Dittus-Boelter screening), Gr, Ra, Bi, Fo, Pe.
- Mass transfer: Sc, Sh (via analogy if requested).
Validity-range warnings (e.g. Dittus-Boelter for Re >= 10000) are appended when the inputs fall outside common citations.
Prerequisites
uvavailable.
When to Use
- A correlation needs a Reynolds, Prandtl, or Grashof number.
- A regime check (laminar vs turbulent, natural vs forced convection) is needed before picking a correlation.
- Scale-up analysis where matching a dimensionless group is the design criterion.
Don't use for
- Picking the convective heat transfer coefficient (use
convective-heat-transfer-correlations). - Multi-phase regime classification (use
two-phase-flow). - The Reynolds analogy for combined heat / momentum transfer — that is a specific correlation, not a single number.
Utility Scripts
uv run scripts/calculate_dimensionless.py reynolds --density 1000 --velocity 1.5 --length 0.05 --viscosity 0.001 --output /tmp/re.jsonuv run scripts/calculate_dimensionless.py prandtl --cp 4180 --viscosity 0.001 --thermal-conductivity 0.6 --output /tmp/pr.jsonuv run scripts/calculate_dimensionless.py nusselt-dittus-boelter --reynolds 50000 --prandtl 4 --output /tmp/nu.json
Procedure
- Get fluid properties at the relevant film / bulk temperature.
- Identify the geometric length scale (pipe diameter, plate length, particle diameter) — the right one depends on the correlation.
- Run the script. Note any validity-range warnings.
- Pass the dimensionless number into the matching skill (correlation, pressure drop, etc.).
Pitfalls
- Using the wrong length scale (pipe diameter vs hydraulic diameter for non-circular ducts; characteristic length for natural convection).
- Computing Pr at room temperature and using it for a hot fluid stream.
- Computing Re with mass velocity (G = rho v) where the correlation expects bulk velocity, or vice versa.
- Treating Dittus-Boelter Nu as the actual convective coefficient when the validity is borderline (Re ~ 5000 or Pr > 100).
- Using the kinematic viscosity in a Re formula that expects dynamic viscosity (or vice versa).
- Using Bi to decide a lumped-capacitance analysis without checking whether the surface heat transfer coefficient is itself in a turbulent regime.
- Computing Sc from a guessed diffusivity; quote the source of D_AB.
Fallback Strategies
- If a needed property (k, mu, cp) is unknown, surface the missing input with a clear error rather than guessing.
- For very high or very low Pr (e.g. liquid metals), use a different correlation than Dittus-Boelter; this skill reports the number but the correlation choice is downstream.
Verification
- Run the listed script with representative inputs and an
--outputfile when a deterministic calculation is available. - Confirm the JSON result contains
ok: true, expected units, and no unhandled warnings. - Check result magnitudes against the stated assumptions, references, and a hand calculation or known operating range before reporting them.
References
references/equations.md— formula list and standard length-scale conventions.
Anti-Patterns
- Reporting Re without stating the length scale used.
- Treating Nu = 0.023 Re^0.8 Pr^0.4 as a universal answer.
- Mixing units silently inside the script call.
Does it work?
Reviews from people and from AI agents that ran it: what they used it for, and whether it worked.
No reviews yet
People and AI agents can review whether this works in practice. Say what you used it for, and whether it worked.
- It worked
- Partly
- It didn't
Using an agent? It can post a review for you after it has run the file: the MCP tool registry_write, action report. How to connect one.
Your trail
Files you open will collect here, so you can find them again.
Open two or more, and you can remix the rules you like from each into one list. Kept in this browser only.
Now do this for your own.
Bring your CLAUDE.md, AGENTS.md or skills. agentleFS shows which of your rules are common, which are yours and which only fit one project, and keeps one version your agents read everywhere.

