If this session was compacted, the copy of this skill in context may be cut off. Read ${CLAUDE_SKILL_DIR}/SKILL.md from disk and resume at the step you are on.

When to invoke

Use when asked to "pair agent", "connect agent", "share browser", "remote browser", "let another agent use my browser", or "give browser access".

Preamble

eval "$("${VIBESTACK_HOME:-$HOME/.vibestack}/bin/vibe-slug" 2>/dev/null)" 2>/dev/null || SLUG="unknown"
_LEARN_FILE="${VIBESTACK_HOME:-$HOME/.vibestack}/projects/${SLUG:-unknown}/learnings.jsonl"
if [ -f "$_LEARN_FILE" ]; then
  _LEARN_COUNT=$(wc -l < "$_LEARN_FILE" 2>/dev/null | tr -d ' ')
  echo "LEARNINGS: $_LEARN_COUNT entries loaded"
  if [ "$_LEARN_COUNT" -gt 5 ] 2>/dev/null; then
    "${VIBESTACK_HOME:-$HOME/.vibestack}/bin/vibe-learnings-search" --limit 5 2>/dev/null || true
  fi
else
  echo "LEARNINGS: none yet"
fi

{{include lib/snippets/session-host.md}}

{{include lib/snippets/decision-brief.md}}

{{include lib/snippets/working-protocols.md}}

{{include lib/snippets/state-protocols.md}}

/pair-agent — Share Your Browser With Another AI Agent

You're sitting in Claude Code with a browser running. You also have another AI agent open (OpenClaw, Hermes, Codex, Cursor, whatever). You want that other agent to be able to browse the web using YOUR browser. This skill makes that happen.

How it works

Your vibestack browser runs a local HTTP server. This skill creates a one-time setup key, prints a block of instructions, and you paste those instructions into the other agent. The other agent exchanges the key for a session token, creates its own tab, and starts browsing. Each agent gets its own tab. They can't mess with each other's tabs.

The setup key expires in 5 minutes and can only be used once. If it leaks, it's dead before anyone can abuse it. The session token lasts 24 hours.

Same machine: If the other agent is on the same machine (like OpenClaw running locally), you can skip the copy-paste ceremony and write the credentials directly to the agent's config directory.

Remote: If the other agent is on a different machine, you need an ngrok tunnel. The skill will tell you if one is needed and how to set it up.

SETUP (run this check BEFORE any browse command)

B="${CLAUDE_SKILL_DIR:-$HOME/.claude/skills/pair-agent}/../browse/bin/vibe-browse"
[ -x "$B" ] || B="$(command -v vibe-browse || true)"
if [ -n "$B" ] && [ -x "$B" ] && [ "$("$B" status 2>/dev/null)" != "BROWSE_NOT_AVAILABLE" ]; then
  echo "READY: $B"
  echo "BROWSE_BIN: $B"
else
  echo "NEEDS_SETUP"
fi

Every Bash call starts a fresh shell, so $B is unset in every later block. A block that runs a browse command starts with B='<BROWSE_BIN>': replace <BROWSE_BIN> with the path printed on the BROWSE_BIN: line.

If NEEDS_SETUP, stop and tell the user the browse binary could not be found or could not start — node is missing, or first-run setup was declined.

Pairing needs the full browse daemon: the stateless fallback shim has no token registry to mint against and answers NOT_SUPPORTED:pair-agent. If you see that, say the daemon is not running in this checkout and stop — never describe a pairing that did not happen.

Step 1: Check prerequisites

B='<BROWSE_BIN>'
$B status 2>/dev/null

If the browse server is not running, start it:

B='<BROWSE_BIN>'
$B goto about:blank

This ensures the server is up and healthy before pairing. Note whether a daemon was already answering before this step: one you just started holds no tabs or logins, so Step 4's live-daemon question does not apply to it.

Step 2: Ask what they want

Use AskUserQuestion:

Which agent do you want to pair with your browser? This determines the instructions format and where credentials get written.

Options:

• A) OpenClaw (local or remote)
• B) Codex / OpenAI Agents (local)
• C) Cursor (local)
• D) Another Claude Code session (local or remote)
• E) Something else (generic HTTP instructions — use this for Hermes)

Based on the answer, set TARGET_HOST:

• A → openclaw
• B → codex
• C → cursor
• D → claude
• E → generic (no host-specific config)

Step 3: Local or remote?

Use AskUserQuestion:

Is the other agent running on this same machine, or on a different machine/server?

Same machine skips the copy-paste ceremony. Credentials are written directly to the agent's config directory. No tunnel needed.

Different machine generates a setup key and instruction block. If ngrok is installed, the tunnel starts automatically. If not, I'll walk you through setup.

RECOMMENDATION: Choose A if the agent is local. It's instant, no copy-paste needed.

Options:

• A) Same machine (write credentials directly)
• B) Different machine (generate instruction block for copy-paste)

Step 4: Execute pairing

Live-daemon consent (one-way door). Pairing can relaunch the browse daemon, and a relaunch KILLS the running headless daemon: its open tabs, cookies and signed-in sessions die with it. The CLI never kills a live daemon unless it is given --force-restart, so check first:

B='<BROWSE_BIN>'
BROWSE_NO_AUTOSTART=1 $B status 2>/dev/null | head -5

• No status output, it shows Mode: headed, or Step 1 started the daemon itself: nothing to lose — continue without asking. A daemon Step 1 started may be relaunched, so pass --force-restart if the CLI asks for it.
• A live daemon without Mode: headed, and SESSION_KIND is spawned or headless: do not ask and do not pass --force-restart. Pair against the live daemon as-is; if the CLI refuses without a relaunch, show its output and stop.
• A live daemon without Mode: headed in an interactive session: ask via AskUserQuestion — lost tabs, cookies and logins cannot be recovered:

"A headless browse daemon is live (tabs and logins may be active). Pairing a visible browser means relaunching it, and everything in the current daemon is lost.

RECOMMENDATION: Choose B unless the other agent specifically needs a visible browser window; pairing works against the existing daemon."

Options:

• A) Relaunch (pass --force-restart; current tabs, cookies and logins are lost)
• B) Keep the live daemon (pair against it as-is)

Only add --force-restart to the pair-agent commands below after an explicit A. Never default to A on a vague reply — this is a destructive confirmation. If the CLI refuses on B because it needs a relaunch, show its output and stop; never retry with --force-restart on your own.

If same machine (option A):

Run pair-agent with --local flag:

B='<BROWSE_BIN>'
$B pair-agent --local TARGET_HOST

Replace TARGET_HOST with the value from Step 2 (openclaw, codex, cursor, etc.).

If it succeeds, tell the user: "Done. TARGET_HOST can now use your browser. It will read credentials from the config file that was written. Try asking it to navigate to a URL."

If it fails (host not found, write permission error), show the error and suggest using the generic remote flow instead.

If different machine (option B):

Consent gate (once per machine). The tunnel exposes this browser beyond the machine, so it stays off until the user opts in. The daemon enforces the same flag: with pair_agent not on it refuses /tunnel/start and ignores BROWSE_TUNNEL=1, so a remote pairing fails closed rather than opening a tunnel nobody agreed to. Never set the flag yourself to get past that refusal — not pair_agent in the config and not VIBESTACK_PAIR_AGENT=on in the environment, which overrides it. Only the user's answer below turns it on. Check the standing consent:

"${VIBESTACK_HOME:-$HOME/.vibestack}/bin/vibe-config" get pair_agent 2>/dev/null || echo "unset"

If the value is not on, ask via AskUserQuestion. This is a one-way door — it opens a path from the internet to a browser that is already logged into the user's accounts — so ask it every time consent is absent, and never let a question preference suppress it:

"Remote pairing runs an ngrok tunnel from the internet to this machine's browser. The remote agent gets a scoped token and a command allowlist, but the browser it reaches is the one holding your sessions. Enable pair-agent on this machine?"

Options: A) Enable — run "${VIBESTACK_HOME:-$HOME/.vibestack}/bin/vibe-config" set pair_agent on, confirm it reads back on, and continue. B) No — stop here; local pairing (option A above) still works and exposes nothing.

If the value is already on, say nothing and continue — consent stands until vibe-config set pair_agent off.

Then detect ngrok status:

which ngrok 2>/dev/null && echo "NGROK_INSTALLED" || echo "NGROK_NOT_INSTALLED"
ngrok config check 2>/dev/null && echo "NGROK_AUTHED" || echo "NGROK_NOT_AUTHED"

If ngrok is installed and authed: Just run the command. The CLI will auto-detect ngrok, start the tunnel, and print the instruction block with the tunnel URL:

B='<BROWSE_BIN>'
$B pair-agent --client TARGET_HOST

What a paired agent gets by default. The daemon grants read + write + admin + meta — the trust boundary is the pairing ceremony, not the scope, so a default agent CAN execute JavaScript and read cookies and storage. --control (and its --admin alias) adds the browser-wide destructive commands: stop, restart, disconnect. --restrict is what narrows access. Say this plainly when you present the pairing: the person approving it is granting more than the flag names suggest.

If the user also needs the control commands (stop, restart, disconnect):

B='<BROWSE_BIN>'
$B pair-agent --control --client TARGET_HOST

CRITICAL: You MUST output the full instruction block to the user. The block runs from its first ==== divider line to its last, both included. Copy the ENTIRE block verbatim into your response so the user can copy-paste it into their other agent. Do NOT summarize it, do NOT skip it, do NOT just say "here's the output." The user needs to SEE the block to copy it. Output it inside a markdown code block so it's easy to select and copy.

Then tell the user: "Copy the block above and paste it into your other agent's chat. The setup key expires in 5 minutes."

If ngrok is installed but NOT authed: Walk the user through authentication.

SECURITY: the ngrok authtoken must NEVER pass through this chat, a Bash tool call, or shell history — a token pasted here lands in the transcript, and in anything the transcript is synced or shared to. The user runs the auth command in their OWN terminal; you only verify the result.

Tell the user: "ngrok is installed but not logged in. Let's fix that — in your own terminal (not here; the token should never enter this chat):

1. Go to https://dashboard.ngrok.com/get-started/your-authtoken
2. Copy your auth token
3. In YOUR terminal, run: ngrok config add-authtoken <paste your token>
4. Tell me 'done' when finished."

STOP here and wait for the user to say they have run it. Do NOT ask for the token and do NOT accept a pasted one. If the user pastes it anyway, tell them to rotate it at https://dashboard.ngrok.com — it is in the transcript now — and to re-auth in their terminal with the new one.

When they say done, verify without ever touching the token:

ngrok config check 2>/dev/null && echo "NGROK_AUTHED" || echo "NGROK_NOT_AUTHED"

If NGROK_AUTHED: retry $B pair-agent --client TARGET_HOST.

If ngrok is NOT installed: Walk the user through installation:

Tell the user: "To connect a remote agent, we need ngrok (a tunnel that exposes your local browser to the internet securely).

1. Go to https://ngrok.com and sign up (free tier works)
2. Install ngrok:
   • macOS: brew install ngrok
   • Linux: snap install ngrok or download from ngrok.com/download
3. Auth it: ngrok config add-authtoken YOUR_TOKEN (get your token from https://dashboard.ngrok.com/get-started/your-authtoken)
4. Come back here and run /pair-agent again."

STOP here. Wait for the user to install ngrok and re-invoke.

Step 5: Verify connection

After the user pastes the instructions into the other agent, wait a moment then check:

B='<BROWSE_BIN>'
$B status

Look for the connected agent in the status output. If it appears, tell the user: "The remote agent is connected and has its own tab. You'll see its activity in the side panel if you have vibestack Browser open."

What the remote agent can do

With default access (read + write + admin + meta):

• Navigate to URLs, click elements, fill forms, take screenshots
• Read page content (text, HTML, snapshot)
• Create new tabs (each agent gets its own)

--control (and its --admin alias) adds the browser-wide destructive commands: stop, restart, disconnect. --restrict is what narrows access.

Scope is not the only gate. A remote agent reaches the daemon through the tunnel surface, which serves a fixed command allowlist on top of whatever the token grants. eval is on it; js, cookies and storage are not, and no scope makes them dispatchable remotely. eval --out is also refused there — --out is a disk write, and the tunnel surface never grants disk-write capability. An agent paired with --local talks to the daemon directly and gets all four. Explain the asymmetry when a remote agent reports a command "missing": it is a boundary, not a bug.

Never pass root as a client name. root is the daemon's own identity, and the scope, domain and rate-limit checks all short-circuit for it — an agent paired under that name would inherit unrestricted access no --restrict could claw back.

Troubleshooting

"Tab not owned by your agent" — The remote agent tried to interact with a tab it didn't create. Tell it to run newtab first to get its own tab.

"Domain not allowed" — The token has domain restrictions. Re-pair with broader domain access or no domain restrictions.

Re-pairing replaces, but only under the same name. Re-pairing a client name revokes that name's unexchanged setup keys at once. If the new grant is narrower (a scope dropped, or a domain restriction added or tightened) the daemon also revokes the live session immediately; a broader grant keeps the session until the new key is exchanged. So tightening a live agent means re-pairing it with the same --client name and the narrower --restrict. A new name tightens nothing — the over-scoped agent keeps its token until it expires or you run $B tunnel revoke <old-name>.

"Rate limit exceeded" — The agent is sending > 10 requests/second. It should wait for the Retry-After header and slow down.

"Token expired" — The 24-hour session expired. Run /pair-agent again to generate a new setup key.

Agent can't reach the server — If remote, check the ngrok tunnel is running ($B status). If local, check the browse server is running.

Platform-specific notes

OpenClaw / AlphaClaw

OpenClaw agents use the exec tool instead of Bash. The instruction block uses exec curl syntax which OpenClaw understands natively. When using --local openclaw, credentials are written to ~/.openclaw/skills/vibestack/browse-remote.json.

Codex

Codex agents can execute shell commands via codex exec. The instruction block's curl commands work directly. When using --local codex, credentials are written to ~/.codex/skills/vibestack/browse-remote.json.

Cursor

Cursor's AI can run terminal commands. The instruction block works as-is. When using --local cursor, credentials are written to ~/.cursor/skills/vibestack/browse-remote.json.

Revoking access

See who holds access first. This lists every live agent (name, scopes, domain restrictions, expiry, command count) and every setup key nobody has redeemed yet, marked (pending):

B='<BROWSE_BIN>'
$B tunnel agents

Revoke one agent. This cuts that name's session token and its setup keys, spent or pending, and hands its tabs back. It then re-lists to confirm the name is gone and exits non-zero if it is not:

B='<BROWSE_BIN>'
$B tunnel revoke <agent-name>

Both read the root token from the daemon's state file and never start a daemon. Report the revoke only after its Revoked "<agent-name>" line. On a non-zero exit, show the output: an unknown name means check $B tunnel agents; any other failure means access was NOT confirmed cut — say so and fall back to $B stop.

Stopping the daemon revokes everything. Scoped tokens live in daemon memory and are never written to the state file, so the next command boots a fresh daemon with a new root token and every previously issued token — session tokens and unexchanged setup keys alike — is dead:

B='<BROWSE_BIN>'
$B stop

That also drops the tunnel: the daemon holds the ngrok listener in-process, so it goes down with the daemon and the public URL stops resolving. Do NOT reach for pkill -f ngrok — it would kill every unrelated ngrok the user is running and still not be the thing serving this tunnel.

$B tunnel rotate does NOT exist — never tell a user to run it.

Tokens expire on their own (24h by default), and a setup key expires in 5 minutes if never exchanged.

Orchestrator injection prompts

When a remote/orchestrating agent spawns a vibestack coding session (rather than just sharing the browser), it can inject a ready-made discipline prompt from lib/orchestrator/ into the target repo's CLAUDE.md:

• lite.md — planning discipline for any spawned coding task
• full.md — /autoplan → implement → /ship, report the PR URL
• plan.md — /office-hours → /autoplan, save the reviewed plan, don't build

These are plain prompts (nothing installs them); the orchestrator reads the file and appends its body. See lib/orchestrator/README.md.