Database Engineer

SQLite-domain specialist for migrations and data integrity.

Core Mission

Migrations are integration code. Most "data" bugs aren't algorithmic — they're contract bugs between schema, importer, and verifier. This skill exists because P4 (the VNX one-shot consolidation migrator) consumed 5 fix-forward rounds before converging, and the bugs were almost entirely SQLite/multi-tenant gotchas a generalist would miss.

The specific recurring failure-modes are catalogued in references/bug-taxonomy.md with concrete VNX examples. Read it before writing any migration code.

When to Use

• Writing or editing files under schemas/migrations/
• Touching _import_table, _compare_counts, or any code that ATTACHes / SELECTs / INSERTs across tenant boundaries
• Designing UNIQUE constraints or primary keys for any table that will hold multi-project rows
• Adding JOIN or correlated-subquery code that scans tables ≥10k rows
• Debugging a migration that "completed" but produced wrong row counts
• Operator complains "stuck at 100% CPU for hours" — likely O(N×M) (see references/sqlite-fts5-gotchas.md)
• Any code that calls INSERT OR IGNORE or INSERT OR REPLACE

STEP 0 — Foundational Check (Mandatory)

BEFORE proposing any design, fix, or implementation:

1. Consult relevant ADRs in docs/governance/decisions/. Special attention to:
   • ADR-005 (NDJSON audit ledger as primary observability)
   • ADR-007 (multi-tenant project_id stamping; composite keys for central state DBs)
   • ADR-010 (subprocess adapter as canonical Claude routing) List any ADR that applies to the task and how it constrains your solution.
2. Consult relevant memory in ~/.claude/projects/-Users-vincentvandeth-Development-vnx-dev-githost/memory/MEMORY.md — particularly entries about past architectural incidents.
3. Check P4-style incident docs in claudedocs/ for analogous failures (e.g., 2026-05-09-p4-migration-architecture-lessons.md for multi-tenant migration patterns).
4. State your foundational read aloud at the start of your response. Example: "ADR-007 applies: new tabel X needs composite PK over project_id. Per P4 §4.2, single-column UNIQUE is a smell. Memory [[adr-007-multitenant-composite-keys]] confirms."

Skipping STEP 0 is a process violation, not a shortcut. The FUT-1 chain (2026-05-28) burned 6 codex rounds because ADR-007 was not consulted at design time.

Decision Protocol

Before writing migration code, walk through references/migration-defense-checklist.md (loaded explicitly when needed; checklist is reproduced inline below for fast access).

When asked to fix a "data missing" or "data wrong" bug, the first investigative step is EXPLAIN QUERY PLAN on the failing query and .indexes on the related tables. Two-thirds of the bugs in the P4 history were diagnosable this way in under five minutes once anyone thought to look.

1. SQLite Mechanics

Journal modes

SQLite supports two journal modes operators commonly hit: DELETE (rollback journal as a sibling file <db>-journal) and WAL (<db>-wal + <db>-shm). Never copy a DB file mid-write without one of:

• sqlite3.Connection.backup(dest) — handles both modes correctly, locks briefly, copies all pages including in-flight ones
• BEGIN IMMEDIATE; .dump | sqlite3 newfile; COMMIT; — slower but produces SQL text
• For WAL specifically: PRAGMA wal_checkpoint(TRUNCATE) flushes the WAL into the base file, then a normal file copy is consistent

shutil.copy2(src, dst) of a WAL DB is not safe: committed state may live in -wal and the copy will be partial. R2 of P4 hit this; fixed by switching to Connection.backup().

Hot journal recovery

If a writer process is killed mid-transaction, the journal/WAL file remains. The next process to open the DB reads it and replays/rolls back. This is automatic but has two implications:

1. After SIGTERM/SIGKILL of a migrator, open the DB once (e.g. sqlite3 <db> "SELECT 1;") before inspecting it. Otherwise the file size you see includes the in-flight transaction's pages and reads can be confusing.
2. Pre-snapshot files (<db>.presnap.*) created by _snapshot_central are belt-and-suspenders on top of journal recovery, useful when the rollback semantics need to span multiple migrations rather than a single transaction. Don't delete them while a migrator is alive.

FTS5 virtual tables

FTS5 is a separate physical store with its own segments. Schema-altering it usually means drop + recreate + re-INSERT-from-temp-table. There is no ALTER TABLE … ADD COLUMN for FTS5 vtabs; column changes require rebuild. See references/sqlite-fts5-gotchas.md for the rebuild pattern and the perf trap that almost shipped in P4 round 4.

ATTACH DATABASE for multi-source migrations

Read-only attach uses a URI:

con.execute("ATTACH DATABASE ? AS src", (f"file:{src_path}?mode=ro",))

The mode=ro flag is critical — without it, the attach opens a write connection that briefly modifies the source's -shm file and breaks the read-only contract (operator backups can fail integrity checks).

2. Multi-Tenant Patterns

In a single-tenant database, id INTEGER PRIMARY KEY is fine. In a multi-tenant central DB, that same constraint causes silent data loss the moment two tenants happen to have overlapping id values. The P4 chain shipped this bug twice (in terminal_leases and execution_targets).

Composite uniqueness is the default

For any table that will hold rows from multiple tenants, the unique constraints should be (project_id, <natural_key>), not <natural_key> alone. Examples that bit P4:

• terminal_leases.terminal_id UNIQUE → must be (project_id, terminal_id) UNIQUE
• execution_targets.target_key UNIQUE → composite
• tag_combinations.tag_tuple UNIQUE → composite
• code_snippets FTS5 row identity is rowid + project_id column; queries must always filter on project_id

Stamping vs deriving project_id

Two patterns coexist in VNX:

1. Stamp at import: importer overwrites the project_id column with the runtime project's id, regardless of what the source row contained. Used by _import_table. Risk: silent skip on PK conflict (see T2 in bug taxonomy).
2. Stamp at write-time: writer code (e.g. dispatch_register, append_receipt) takes a project_id parameter and writes it explicitly. Used by per-project state code. Risk: callers forget; helper enforcement matters.

Prefer pattern 2 for new code. When migrating legacy single-tenant data, pattern 1 is unavoidable — pair it with ON CONFLICT … DO UPDATE SET project_id=excluded.project_id so re-stamping wins on collision (see Section 3).

Verifier scoping

Per-project verification queries MUST include WHERE project_id = ?. The P4 verifier had a bug where code_snippets count was reported as the global total for every project; this only manifests because of FTS5 vtab semantics but the lesson is broader: never aggregate without scope in a multi-tenant verifier.

3. Migration Safety

UPSERT vs INSERT OR IGNORE

This decision shipped wrong in P4. Cheat sheet:

Default for migration code: composite UNIQUE + INSERT OR IGNORE. It's the simplest invariant: each tenant's row is uniquely identified, retries are no-ops, and there's no "stale row wins" surprise.

Idempotency

A migrator that can be safely re-run is worth orders of magnitude more than one that requires careful manual cleanup on every retry. Idempotency means:

• Each row has an imported_at or run_id so repeat imports are detectable
• A bookkeeping table like p4_import_idempotency(project_id, source_table, source_rowid) records what's been done
• Verification looks at "this run's results" not "all results" — see T9 in bug taxonomy for what happens when run_id scoping is missing

Schema-first vs imperative migrations

The P4 design uses ALTER-TABLE migrations layered on whatever central schema happened to exist. This works for incremental changes but fragile for greenfield (--fresh-central had to be added in R3 because empty central produced empty migration runs).

For new migrators, prefer explicit central schema file + descriptor-driven importer — see references/multi-tenant-patterns.md Section 3 for the pattern.

Rollback semantics

SQLite's transaction rollback (BEGIN/ROLLBACK) is automatic on Python sqlite3.Connection exceptions. But cross-DB rollback (e.g. central QI + central RC) requires explicit coordination — the P4 pattern uses _snapshot_central to create <db>.presnap.<phase>.<pid> files before risky migrations, then restores them on failure. This is correct only if every writer respects the contract.

4. Performance

Indexes for JOINs and correlated subqueries

The R4 perf bug: migration 0016_rebuild_fts5.sql had:

INSERT INTO code_snippets (...)
SELECT ..., COALESCE(
  (SELECT project_id FROM snippet_metadata m
   WHERE m.snippet_rowid = code_snippets_rebuild_tmp.rowid),
  'vnx-dev'
)
FROM code_snippets_rebuild_tmp;

snippet_metadata.snippet_rowid was not indexed. For 727k snippets × 119k metadata rows = ~87B row scans = ~3-5h ETA.

Fix: add CREATE INDEX IF NOT EXISTS idx_snippet_metadata_rowid ON snippet_metadata(snippet_rowid); before the rebuild SELECT. Reduces to O(N log M) ≈ 17M ops, completes in seconds.

Rule: any migration with JOIN or correlated subquery involving a table ≥10k rows MUST include the supporting index in the same migration file.

EXPLAIN QUERY PLAN

Always run before shipping a migration that touches large tables:

EXPLAIN QUERY PLAN <your-INSERT/SELECT>;

Look for SCAN TABLE (bad for inner loops). Want to see SEARCH TABLE … USING INDEX ….

FTS5 rebuild costs at scale

~5k rows/sec on a modern SSD, dominated by tokenizer work. For 727k rows expect ~150 sec on the rebuild alone, plus journal write overhead (~30% extra). If observed >10 min for ~1M rows, suspect missing index on subquery columns.

5. Verifier Patterns

A verifier that shares code paths with the importer is structurally co-blind: any helper bug affects both, neither catches the other. Three rules:

1. Different connection / different process: open the central DB in a fresh sqlite3.Connection, ideally via a different code module. The P4 verifier opens via _compare_counts which reuses importer helpers; this is why R5 shipped a verifier-aggregate bug.
2. Per-project scoped queries: every COUNT must filter by project_id. A "central total" check is fine as a separate check, not as the per-project verification.
3. Fail-fast on missing scope: if a table is expected to have project_id and it doesn't, the verifier must raise (or write to read_errors) — not silently fall back to global COUNT(*). The P4 R5 fix made _compare_counts strict about this.

6. Migration Defense Checklist (mandatory pre-merge)

Apply each item before merging migration code. Each line corresponds to a real bug from the P4 history.

• Composite UNIQUE on multi-tenant tables: every imported table with a natural key has UNIQUE(project_id, key) not UNIQUE(key) alone (T3, T6 in references/bug-taxonomy.md)
• UPSERT chosen, not IGNORE: INSERT OR IGNORE only used where the unique constraint already includes project_id; otherwise switch to ON CONFLICT … DO UPDATE (T2)
• Verifier filters per-project: every COUNT/checksum query in the verifier has WHERE project_id = ?; no aggregate fallback (T4)
• Bootstrap path tested empty: there is a test where central DB file does not exist at start, and the migration produces a valid central with all expected tables and zero data (T5)
• DEFAULT used only for NOT NULL backfill: any DEFAULT '<value>' on a column added by ALTER must be reasoned about in the importer's stamp logic. If the default is "vnx-dev" or another sentinel that could mask un-stamped rows, add a NOT NULL CHECK in the same migration that forbids the sentinel post-migration (T1)
• Indexes for JOIN/correlated columns: any migration with JOIN or (SELECT … WHERE x = outer.y) against a table ≥10k rows includes the supporting CREATE INDEX (T7)
• Real-data fixture test: there is at least one integration test that runs the migration against fixtures sized within 1 OOM of production data; not just synthetic 5-row examples (Section 3.2 of lessons doc)
• Read failures distinguishable: source-table-missing and source-table-unreadable are separate codes in the importer's read_errors; never silently degrade to count=0 (T8)
• run_id scoping on retryable records: any <feature>_skipped / <feature>_failed table includes run_id and resolved_at to filter cross-run state (T9)
• WAL-safe snapshots: pre-migration snapshots of source DBs use Connection.backup() or wal_checkpoint(TRUNCATE) + cp, not bare shutil.copy2 (T10)

Reference Files

• references/bug-taxonomy.md — the 10 recurring patterns with VNX examples; READ FIRST when triggered
• references/sqlite-fts5-gotchas.md — FTS5 rebuild patterns + perf traps
• references/multi-tenant-patterns.md — composite key design, stamping strategies, descriptor-driven importers
• references/p4-postmortem-summary.md — links to full lessons doc + key code:line citations

Companion Skills

• For VNX-specific schema knowledge (which tables hold what, the dispatch lifecycle, intelligence-injection flow): use intelligence-engineer instead. This skill is the generic SQLite layer; intelligence-engineer is the VNX domain layer.
• For general code review: reviewer may request a database-engineer second-opinion review when a PR touches schemas/, _import_table-style code, or migration files.

Codex Defense Checklist (inherited from backend-developer)

Database work still ships through the same code-review pipeline. The patterns in backend-developer/SKILL.md Section "Codex Defense Checklist" apply: atomic writes, fcntl locking on shared NDJSON, null guards, schema version checks. Treat that as a baseline and the Migration Defense Checklist above as additive for any migration-touching work.