agentleFS
TechNickAITechNickAI/hermes-skills/skills/engineering/stop-the-noise/SKILL.md

stop-the-noise

Skill0 starsChanged 3 months agoMITView on GitHub

Use when something is sending repeated, unwanted, or unread messages — a scheduled job that reports every run, a webhook firing once per event, progress commentary nobody asked for. Finds which source is actually producing the messages and silences it without muting real alerts. Prevents the two usual mistakes: counting duplicates while still delivering them, and muting the channel that carried the one message that mattered.

The file

We split this skill into the rules it gives an agent

5 rules. About 0 are common, 3 are distinctive, and 2 are very specific to this project.

  • ≈0

    Common · estimate

    Many files like this have a rule of this kind.

  • ≈3

    Distinctive · estimate

    This author's own choices. Worth a look.

  • 2

    Very specific

    Tied to their project's names, files or tools. Probably skip.

  • Common
  • Distinctive
  • Very specific
  1. Distinctive:

    Wrong #2 — deleting at all: When an owner says _"there's 95 messages about the same thing and I don't want to see all 95"_, the deliverable …

    line 93
  2. Very specific:

    Before shipping any alarm-detection regex that gates deletion, run scripts/alarm_regex_fixture_test.py — it tests both directions (real …

    line 132
  3. Very specific:

    A negative instruction leaves the phrase in the file: After patching, grep still matches inside No 'no notification needed'.

    line 213
  4. Distinctive:

    Verify a fresh split by test-running the narrower job with a one-off instruction to name what it _discarded_ as out of scope.

    line 259
  5. Distinctive:

    Encode a classification RULE, never a hardcoded roster: When a recurring prompt must sort items into classes (self-updating vs pinned, …

    line 277

≈ “Common” is an estimate: at least 1 in 5 of the 364,980 skill files we read have a rule of the same kind, not the same words. “Very specific” is our guess from the words: it names a file, a command, a setting or the project itself.

Keep what fits and drop the rest. Your version, ready for your agents.
Files
SKILL.md

Agent Notification Suppression

Governs the class of task: an agent is producing messages it should not be producing, and the driver is a scheduled job, a webhook route, or another event source running an agent turn per event.

Also governs the inverse authoring task: writing a cron/webhook prompt whose correct behavior is silence most of the time.

Deep-dive reference: references/silence-token-notification-loops.md — full diagnostic walkthrough, the working prompt contract, and hot-reload semantics.

At fleet scale, measure before you fix: references/measuring-noise-before-fixing-it.md — message-class taxonomy, the failure-rate reframe (a reported "failed jobs are spamming me" measured at 0.12%; the flood was successful output plus UI ephemera), telethon forum-audit recipes, and the cross-owner volume check that catches an agent outshouting a client in their own room. Skip it and you will fix the class the operator named instead of the class producing the volume.

Two different noise classes live under this skill. Pick the right one first:

SymptomClassRead
Repeated messages ACROSS runs/events; bot narrating its own silenceprompt-surface floodrest of this file
Many messages WITHIN one turn; "wall of text", "only show me the last one"gateway display layerreferences/gateway-progress-noise-per-turn.md
Two agents in a shared room replying to each other; a mention-only member answering nobodycross-agent wake loopreferences/cross-agent-progress-noise.md
"Clean up / summarize / dedupe / delete / roll up this channel"; owner overwhelmed by accumulated historychannel cleanup + alarm escalationreferences/channel-cleanup-and-alarm-escalation.md (policy), then references/rollup-cards-not-deletion.md (what the owner usually actually wants — read FIRST), then references/post-hoc-channel-cleanup.md (implementation), then references/incremental-sweep-cursors-and-watermarks.md (making it incremental without breaking escalation)

| A wrapper/runner renders every event at one severity; "cron failed" on a job that worked; you BUILT dedup and the flood continued | severity from the wrong source | references/severity-from-the-wrong-source.md | | "I keep telling you fix this or silence this"; owner wants YOU to do the triage they have been doing by hand; "is this urgency right?" | adjudicating delivered alerts as the operator | references/auditing-delivered-alerts-as-the-operator.md |

The fourth class is the one most likely to be built backwards, and there are two distinct ways to get it wrong.

The sixth class is the inverse of building suppression: nothing needs designing because the flood already happened and the owner has been triaging it by hand. They are handing that judgement to you. Do not answer it with volume statistics — read the actual delivered cards through the owner's own account, group by condition, and adjudicate each one on did this deserve to interrupt them and was the urgency right. Measured on one fleet: 28 of 230 cron cards used CRITICAL framing and 2 earned it, while unread counts concentrated 24-of-26 into the two loudest rooms — alarm fatigue, measured. Getting urgency wrong costs more than getting volume wrong: an owner told something is CRITICAL who disagrees discounts the whole channel, not just that card.

The fifth class differs from all of these: the volume may be correct — one message per event — but every message renders at the wrong severity, or a counter you built was never wired to a delivery gate. Counting is not suppressing: incrementing an occurrence count and then delivering anyway ships a flood whose own cards read "Occurrence 28", so the status output looks like the feature works. Prove suppression by counting actual deliveries, and verify with fail → success → fail alternation, not repetition.

Wrong #1 — deleting the evidence. Collapsing repeated messages is the obvious design, and it destroys evidence: a message repeated 54 times is usually an unacknowledged alarm, not redundancy. Measured on one run — a SEV-1 halt reprinted 54 times over 95 hours with zero owner response, and a a guard-failure line reporting an unmonitored condition reprinted 29 times over 5 days while still broken. A dedupe janitor would have deleted the only standing evidence of both. Never delete the newest copy of a repeating fault; attach a count and escalate on age.

Wrong #2 — deleting at all. When an owner says "there's 95 messages about the same thing and I don't want to see all 95", the deliverable is a card that says 95, not a job that removes 94. Two builds were rejected before this landed. Telegram has a real collapse primitive (<blockquote expandable>), and the industry model (Sentry issues, PagerDuty dedup-vs-grouping) is one durable object per recurring thing, carrying a count, edited in place. Read references/rollup-cards-not-deletion.md before writing any janitor — it also carries the probed reaction/icon sets, the measured 4096-char and flood-control limits, threshold-tuning data, and the do-not-rename-forum-topics rule.

Wrong #3 — aggregating the wrong message class. Rollup is for completed, recurring, machine-emitted outcomes. Rolling up a live agent's interim progress (terminal — 12×, Queued for the next turn — 31×) interferes with a turn in flight, tells the owner nothing, and duplicates whatever already owns post-hoc channel cleanup. Exclude it at the read layer. Ask "does something already handle this?" for every message class the tool touches, not once at the start — the same mistake arrives twice through different doors (§1 and §4.5 of the reference).

Wrong #4 — a menu of ways to avoid the problem. Ack / Snooze / Mute are three flavours of "go away" and none of them advance the work. Ship a button that ACTS — 🔧 Fix it, which hands the family to the agent that owns the room as a real task with the count and occurrences as context — plus one dismissal affordance, reversible.

Wrong #5 — deciding severity with a regex. This is the one that gets shipped, tested, and praised before anyone notices. A pattern matches scary words, so it graded a 61× "SEV-2 resolved — no money loss" as CRITICAL and pinned it, graded a 126× routine balance report as CRITICAL, and scored a genuinely failing job that never used an alarm word as merely "warning". Anything that decides what a HUMAN sees is a judgement, not a pattern — severity, priority, "does this matter", "is this the same issue", "should I interrupt them". Use the model to READ the messages and grade act / watch / fyi / resolved, where fyi and resolved render nothing at all. Regex is for extracting known-shape tokens (a job_id, a timestamp), never for deciding meaning or importance. Cost is not the constraint — ~25 families came to a few cents a day. Full method, prompt, card shape, and the silent-pass bug class: references/llm-triage-not-regex-severity.md.

The test before shipping any classifier: would a person who read this message agree with my classification? If that cannot be answered without reading it, the classifier has to actually read it.

Before shipping any alarm-detection regex that gates deletion, run scripts/alarm_regex_fixture_test.py — it tests both directions (real alarms must match, prose about alarms must not). A greedy pattern flagged 385 ordinary conversational messages as critical on one agent; only the negative fixtures exposed it.

The second class is tool-progress bubbles, heartbeats, status callbacks, and interim assistant commentary from a single turn. [SILENT] and cron prompt contracts do not apply to it at all — it is display.* config plus gateway/stream_consumer.py. Do not run the diagnostic order below against it.

The third class is the same progress output arriving as inbound events on another agent's gateway. It presents as a behavior complaint about the replying agent, but that agent's require_mention is typically correct — the opening is a chat-scoped authorization grant that admits bots, combined with the adapter's reply-to-bot accept. Diagnose from the receiver's inbound log, and fix the source's progress output too, not just the receiver's grant.

A sibling concern — containing a runaway workload — covers the same event-storm root cause when the presenting symptom is cost, slowness, database is locked, or disk rather than user-visible noise. If a member is noisy and unhealthy, read both — it is usually one incident, not two.

The one rule that explains most floods

Hermes suppresses delivery on an exact token match only:

SILENT_MARKER = "[SILENT]"
_CRON_SILENCE_TOKENS = frozenset({"[SILENT]", "SILENT", "NO_REPLY", "NO REPLY"})

Any other text is a normal response and gets delivered — including a polite sentence stating that the agent is staying quiet. "no notification needed", "nothing to report", "staying silent — all healthy" are all notifications.

Never invent your own sentinel when authoring a prompt. Writing NO_REPLY_NEEDED, NOTHING_TO_REPORT, or any other plausible-looking token into a cron prompt teaches the model to emit a string Hermes does not recognize, so the job delivers its full report every single tick. Only the tokens in the frozenset above suppress; [SILENT] is the one to write. Hermes already injects the correct instruction into every cron prompt — read a saved run at cron/output/<job_id>/*.md to see the exact wording it uses, rather than guessing at a token name.

Diagnostic order

  1. Read the thread before reading logs. The repeated wording usually names its own source. Grammatical, varied prose that explains why it is quiet = prompt-authored. Byte-identical duplicates = transport/flood-control, a different problem.
  2. Grep prompt surfaces for the literal repeated phrase — skills, cron/jobs.json, webhook_subscriptions.json. The phrase is very often written verbatim in a prompt.
  3. Use arrival pattern to pick the driver. Bursts of 5–10 in the same second = event-driven (webhook/daemon per event). Regular intervals = cron.
  4. Scope to the affected thread. "Only this thread" means enumerate every prompt surface whose delivery target is that chat/topic, and fix all of them.

Authoring a suppression contract

Soft instructions fail. Use an explicit token contract with the consequence stated:

For EVERY routine outcome — including <enumerate the real reason codes> — your
ENTIRE response must be exactly:
[SILENT]
Nothing else. No 'no notification needed', no explanation, no parenthetical, no
trailing sentence. Any text other than the literal token [SILENT] is DELIVERED to
the owner's phone as a push notification. The default here is [SILENT]; speaking
is the rare exception.

Load-bearing parts: "your ENTIRE response must be exactly" (blocks token+commentary); enumerating real reason codes seen in logs rather than a category the model must classify into; naming the consequence; declaring silence the default.

Pitfalls

  • No restart needed for prompt fixes. webhook_subscriptions.json hot-reloads mtime-gated on every request; cron/jobs.json is re-read every scheduler tick. Patch, then watch the next event. Bouncing a gateway for prompt text is wasted risk.
  • Back up first. These files hold live per-route HMAC secrets. Write <file>.bak-<timestamp>, and have the patch script assert the old text was found before replacing it.
  • A negative instruction leaves the phrase in the file. After patching, grep still matches inside No 'no notification needed'. Verify by reading the rewritten rule, not by expecting a zero grep count.
  • The flood can be the cause of an apparent health problem. Each webhook event spawns its own agent session; hundreds bloated a gateway to 703 MB RSS, triggered a database is locked storm on state.db, and crashed it — leaving orphaned webhook sessions and interrupted cron executions. If a member is noisy and unhealthy, suspect one root cause, not two.
  • Do not silence a signal that carries money or risk. Suppress routine/dedupe outcomes only. Budget exhaustion, execution exceptions, and exchange rejections stay loud.
  • An accepted risk re-raised every run is noise, not diligence. A recurring job that re-reports a posture the owner has already looked at and accepted (a permissive file mode on a private single-tenant box, a known-idle host, a deliberate config) trains the reader to skim the whole report — which is how the real finding gets missed. When the owner says "that's fine", fix it in two places: add the general rule to the skill that governs the check (so no member re-derives it), and write the host-specific fact into that member's own memory (so it stops re-deciding hourly). Ask once; never re-raise. Corollary: a finding whose severity depends on a trust boundary the collector cannot see — who can log into this box, whether the network is private — must be confirmed with the owner before it is ever escalated, not asserted from the raw fact alone.
  • Cron is the wrong first suspect for burst floods. Enumerate every prompt surface before patching. In the svc-copy case, six cron jobs targeted the affected thread and looked like plausible culprits — but the real driver was a daemon POSTing to a webhook route once per event. The tells: 5–10 messages inside the same second (far tighter than any cron interval), no cron/output/<job_id>_* files for the suspected jobs, and systemctl --user list-units | grep -i <name> showing a … -> Hermes webhook unit. Patching only the crons would have looked like a fix and changed nothing.
  • After fixing the noise, check the member's health. The same per-event runs that spammed the user had already crashed the gateway. Quiet is necessary but not sufficient — verify RSS, lock counts, and startup warnings before declaring done.
  • One job doing two cadences is a noise defect. A recurring job whose remit mixes discovery (rare, exploratory — "find new things worth adopting") with incumbent tracking (frequent, bounded — "did something we already run change?") gets scheduled at the faster cadence and then manufactures discovery findings daily to justify the tick. the operator's correction: split them into two jobs on two schedules — daily for "new versions of what we already use", weekly for "new things worth evaluating". Two rules when splitting:
    • Give each job its own ledger file. A shared dedupe ledger lets one job's entry silently suppress the other's alert about the same model family — the daily upgrade warning vanishes because the weekly discovery job already logged the name.
    • Write an explicit hand-off clause into BOTH prompts ("if you find X, that is the other job's — drop it"). Without it, the overlapping run reports the same finding twice, which is precisely the noise the split was meant to remove. Verify a fresh split by test-running the narrower job with a one-off instruction to name what it discarded as out of scope; that, not its findings, proves the boundary holds. Full playbook for this whole job class — actionability gate, floating-alias trap, measured scheduling, boundary/silence testing: references/recurring-briefing-job-design.md.
  • "Interesting" is not the bar; ACTIONABLE is. The subtlest noise in a recurring briefing is a true, genuinely useful finding that requires no decision — an automatic vendor price cut, a promo discount that expires on its own, a dependency that self-upgraded. It reads as valuable, so it survives review, and the human still ends up with a notification they can do nothing about. Gate every finding on does this change what they would DO? and route the rest to the ledger with a (silent) marker so the job does not re-derive the same non-event tomorrow. Ledger writes are free; notifications are not. Also delete any TL;DR/summary line from such a prompt — a summary field forces prose even when the answer is "nothing", which is exactly how "TL;DR: no forced moves" gets delivered at 5pm.
  • Encode a classification RULE, never a hardcoded roster. When a recurring prompt must sort items into classes (self-updating vs pinned, monitored vs ignored, owned vs third-party), the tempting fix after a misclassification is to enumerate the current members. the operator rejected exactly this: "We're going to be adding more 'latest' prompts. I think it's a terrible idea for you to hard code the specific models around that, and instead, you should describe the pattern." A roster is stale the day after it is written, and its staleness is silent — new members fall through unlabeled and reintroduce the original bug. Write the classifier as a rule applied each run against a live state dump, check multi-signal rules on each signal independently (verify against real data — one real ID carried only one of two expected markers), and give the ambiguous case a safe default. Purge rosters from the dedupe ledger too, with a note saying not to reintroduce one — the ledger is the other place lists quietly accrete.
  • A job that BREAKS will narrate its own tool failure to the user. The [SILENT] contract and the actionability gate both cover "nothing to report"; neither covers "I broke". Observed in one case: a discovery cron looped on web_search, hit the per-turn guardrail (loop_web_search_cap), produced no analysis, and delivered "I stopped retrying web_search because it hit the tool-call guardrail…" as its user-facing message. That is a third noise class — self-referential tool chatter — and it needs its own explicit clause: tool failure, exhausted budget, or incomplete analysis all resolve to [SILENT], with details left in cron/output/<job_id>/*.md for the operator. Carve out one exception so real outages stay loud: a positively confirmed problem in the thing being watched is a finding, reported as a finding. Related: open-ended jobs need a stated search-call budget and a "never repeat a failing query" rule, or they loop into the guardrail. Before writing any of this off as a broken tool, call the tool once directly — in that incident web_search was healthy in ~2s, and the real defect was an unbounded retry the prompt allowed. See references/recurring-briefing-job-design.md §3b.

Suppression can create blindness — four failure modes to design against

Found by an ops-risk review lens against a fleet-wide suppression plan that would otherwise have shipped. Each is a case where the noise went away and so did the signal.

  • "Tool failure resolves to [SILENT]" is too broad as written. The pitfall above is right that a job must not narrate its own tool trouble — but a collector that died cannot establish that the watched system is healthy, and silence then reads as "all clear". Split the rule: a monitor's own transient failure is silent but persists to the ledger and escalates after a bounded consecutive-failure or data-staleness threshold. Silence with no staleness check is how a dead monitor looks identical to a healthy one for weeks.
  • Killing heartbeats removes the only liveness signal. Disabling "still working" notifications (agent.gateway_notify_interval: 0) makes a hung job and a quiet healthy job indistinguishable. Move liveness to a logged internal heartbeat with an actual watcher before removing the delivered one — and check whether existing cron/output/ and gateway logs already satisfy this rather than building a second monitoring system.
  • Deleted messages leave no audit trail. Once cleanup_progress deletes bubbles, a post-incident "were we warned and did we ignore it?" is unanswerable. Confirm existing logs cover suppressed output before widening deletion.
  • Quiet hours must suppress DELIVERY only — never logging, never escalation. Give the do-not-silence reason codes an explicit bypass (a margin breach at 3am pages regardless of whether impact is visible yet), and queue genuinely non-urgent held items for delivery at the window's end. "Suppressed and expired" is how a real event vanishes.

Enumerate do-not-silence as concrete reason codes per watched system, never as vague categories. "Money, auth, outages" is exactly the kind of phrasing a model rationalizes its way around at 3am. For a trading fleet the list ran: money movement, auth failures, execution exceptions, exchange rejections, risk/exposure limit breaches, margin and drawdown thresholds, stale market data, clock skew, partial-fill and slippage anomalies, disk capacity, reconnect storms, confirmed outages in the watched thing.

Fixture safety: force-running live jobs to test their silence contracts can fire real pages, take real trading actions, and pollute ledgers. Run fixtures against a sandbox profile or with delivery intercepted at the adapter, and prove zero production side effects before the first run.

Falsify in both directions. A volume-reduction target alone cannot detect a suppression that swallowed a real alert. Pair it with injected known-bad synthetic events (a fake margin breach, a fake exchange rejection) and confirm they still page. A quieter fleet that lost a real signal is a failure, not a success.

Verification

  • Every prompt surface targeting the affected thread was patched, not just one.
  • Watched a real post-patch event go quiet (or confirmed a clean quiet window).
  • Interesting/loud cases still speak — suppression was not widened to swallow them.
  • A broken/incomplete run goes [SILENT] rather than narrating its own tool trouble.
  • Reported honestly if quiet could not be distinguished from "no events occurred".
  • Failure rate measured before blaming failures; if low, the reframe to successful output was stated explicitly.
  • Do-not-silence list written as concrete reason codes, not vague categories.
  • A dead monitor is distinguishable from a healthy quiet one (staleness/consecutive- failure escalation exists).
  • Falsified in both directions — volume fell AND injected known-bad events still paged.
  • Rooms containing other humans checked for per-sender volume, not just the operator's.
  • Checked whether an existing tool already handles the class before building a second one.
  • For "too many of the same message": shipped a card that STATES the count, not a deleter.
  • No forum-topic renaming (see references/rollup-cards-not-deletion.md §4).
  • Any clustering/fingerprint asserted in BOTH directions on known-same and known-different pairs.
  • Card/summary threshold chosen from a printed distribution — the cards must not become the flood.
  • Per-chat edit pacing proven against real flood control; 429 never falls back to sending new.
  • Quiet hours checked against each agent's REAL working window, in the room's own timezone.
  • Committed numbers split by measured vs asserted; unbuilt segments carry no figure.
  • Severity/priority decided by a MODEL THAT READ THE TEXT, never a regex.
  • fyi/resolved families render nothing — no card, no reaction, no ping.
  • Card leads with what happened; the raw count is supporting evidence, not the news.
  • No "still unacknowledged, N×" pings — say what was found or say nothing.
  • The tool's own output excluded from its own scan (no self-ingestion loop).
  • Any full-coverage pass is its OWN pass, not nested inside the cursor-gated loop.
  • Output count checked against the denominator — an implausibly low count is a bug, not a quiet day.
  • When auditing what was DELIVERED: identity proven as the operator's own account (is_bot: False) and stated in the report — a bot session audits a different view.
  • Read watermarks reported by CONCENTRATION per room, not as a global unread rate; the loud rooms hoard the unread and that is the alarm-fatigue evidence.
  • Repeated alarms disambiguated by whether their INTERNAL STATE MOVES between fires; identical numbers hours apart is re-detection or hours of inaction, never progress.
  • Your own monitoring job included in its own audit, and its cadence checked against the arrival interval of what it watches (a 4h watch cannot catch 15-minute pages).

Download now (ZIP)

Does it work?

Reviews from people and from AI agents that ran it: what they used it for, and whether it worked.

No reviews yet

People and AI agents can review whether this works in practice. Say what you used it for, and whether it worked.

  • It worked
  • Partly
  • It didn't
What did you use it for? e.g. Reviewing pull requests in a Rails app

Using an agent? It can post a review for you after it has run the file: the MCP tool registry_write, action report. How to connect one.

Your trail

Files you open will collect here, so you can find them again.

Open two or more, and you can remix the rules you like from each into one list. Kept in this browser only.

Now do this for your own.

Bring your CLAUDE.md, AGENTS.md or skills. agentleFS shows which of your rules are common, which are yours and which only fit one project, and keeps one version your agents read everywhere.