agentleFS
TechNickAITechNickAI/hermes-skills/skills/engineering/live-database-maintenance/SKILL.md

live-database-maintenance

Skill0 starsChanged 3 months agoMITView on GitHub

Use when cleaning up, compacting, backing up, or restoring a SQLite database that a running service still holds open, or when one reports "database disk image is malformed". Covers measuring compaction cost before taking a lock, distinguishing a torn copy from real corruption, locating which table is damaged, and designing a retention policy. Prevents a maintenance window that takes down live traffic, and prevents a health check that reports ok on a broken file.

  • Reads credentials

The file

Show its rules and text

We split this skill into the rules it gives an agent

29 rules. About 0 are common, 18 are distinctive, and 11 are very specific to this project.

  • ≈0

    Common · estimate

    Many files like this have a rule of this kind.

  • ≈18

    Distinctive · estimate

    This author's own choices. Worth a look.

  • 11

    Very specific

    Tied to their project's names, files or tools. Probably skip.

  • Common
  • Distinctive
  • Very specific
  1. Distinctive:

    Do not reorder it for convenience.

    line 28
  2. Very specific:

    Corrupting REPEATEDLY, and the service is an AGENT?: Read references/agent-cli-shellout-second-writer.md first.

    line 63
  3. Very specific:

    Corrupting REPEATEDLY?: Start with references/recurrent-corruption-root-cause-triage.md and run its one-command second-writer check before …

    line 98
  4. Very specific:

    Database already damaged when you go to maintain it?: Read references/corruption-blocks-compaction.md.

    line 125
  5. Very specific:

    About to swap a REBUILT file over a live one?: Read references/rebuilt-db-verification-before-swap.md.

    line 141
  6. Very specific:

    Building a wrapper around a deletion CLI?: Read references/silent-noop-retention-wrappers.md FIRST.

    line 177
  7. Very specific:

    Reporting retention results to a human?: Read references/hermes-session-retention-execution.md — the interpretation traps where correct …

    line 189
  8. Very specific:

    Turning a one-off cleanup into a recurring job?: Read references/chunked-retention-and-silent-weekly-jobs.md.

    line 200
  9. Distinctive:

    Use the application's SQLite library/runtime when the host has known CLI/WAL inconsistencies.

    line 217
  10. Distinctive:

    If source paths disagree and the table is empty, abort rather than guessing.

    line 250
  11. Distinctive:

    Use SQLite's online backup API.

    line 258
  12. Distinctive:

    If backup creation or verification fails, remove partial output, leave the service running, and abort without mutation.

    line 261
  13. Distinctive:

    Stop through the service supervisor.

    line 265
  14. Distinctive:

    If absence cannot be proven, do not mutate.

    line 267
  15. Very specific:

    Use one transaction for the intended retention deletes and save each statement's .changes.

    line 270
  16. Distinctive:

    Do not expand scope or improvise alternate timestamp conversions after stop.

    line 271
  17. Distinctive:

    Check process absence again before checkpoint, before compaction, and after compaction.

    line 272
  18. Distinctive:

    Stop further DB mutation and loudly enter recovery.

    line 299
  19. Distinctive:

    If still unhealthy, stop and prove absence.

    line 302
  20. Distinctive:

    Start and require both process presence and application health.

    line 304
  21. Very specific:

    If rollback also fails, report the service as still down prominently.

    line 305
  22. Very specific:

    Keep the restart failsafe outside the maintenance process.

    line 312
  23. Distinctive:

    If the stopped-window budget expires, abort mutation and restore service first.

    line 313
  24. Distinctive:

    Do not treat a completed file copy as a verified backup until an independent check completes, but do not keep the production service down …

    line 314
  25. Distinctive:

    After recovery, verify application-level readiness and a fresh error window, not only supervisor state.

    line 315
  26. Very specific:

    Audit the stored prompt, don't trust the creation report: Read it back out of jobs.json and grep for each safety-critical element (stop, …

    line 381
  27. Distinctive:

    Follow-through when a contradiction forces an abort:

    line 434
  28. Distinctive:

    Reporting malformed compact lists: Keep one line per key fact/table when formatting could concatenate fields.

    line 449
  29. Distinctive:

    Before planning any retention or archival work on a large database, measure where the bytes actually ARE.

    line 580

≈ “Common” is an estimate: at least 1 in 5 of the 364,980 skill files we read have a rule of the same kind, not the same words. “Very specific” is our guess from the words: it names a file, a command, a setting or the project itself.

Keep what fits and drop the rest. Your version, ready for your agents.
Files
SKILL.md

Live Database Maintenance

Mission

Perform bounded SQLite maintenance without letting a live process overwrite external changes, and leave the service healthy even when maintenance fails midway.

The governing sequence is:

healthy preflight → verified backup → stop → prove process absent → mutate → start → prove process and application health

Do not reorder it for convenience.

Procedure

Reading a database you only want to observe? Two references cover the read-only path specifically: references/read-only-connect-lazy-failure.md (why ?mode=ro fails lazily, so the obvious fallback chain never runs) and references/immutable-read-staleness-gating.md (why an immutable=1 fallback is EXACT on a checkpointed database, and why warning "may be stale" unconditionally makes a monitor cry wolf).

Reviewing unattended maintenance that leaves the service live during VACUUM? Read references/unattended-live-vacuum-operations.md for the application-write-patience test, conservative backup-plus-rebuild disk math, enforced host concurrency, quiet failure monitoring, retention horizons, canary promotion gates, and restore-runbook requirements. Its numeric companion is references/vacuum-lock-budget-and-write-patience.md — measured VACUUM cost (~14.4 s/GB), the write-patience constants that decide whether a lock is a stall or an outage, and the prediction-gate code shape. 🔴 That file now carries two corrections that invert naive planning: the rate is a worst case, AND you cannot predict this at all — two real runs came in 6x fast and 36% slow against the same model. The working method is to VACUUM a copy and time it, then pass the measured number as --max-lock-seconds; prefer that over --force-vacuum. It also covers ranking candidates by freelist and recent human traffic rather than size, the post-compaction verification battery, the live-reader WAL trap that makes a successful run report "reclaimed 0 MB", and why the compaction gate must be evaluated before the backup is taken. scripts/pick_vacuum_target.py is the read-only probe that ranks this host's profiles that way. scripts/measure_vacuum_cost.py then answers how long — it VACUUMs a copy, prints a measured duration and a suggested --max-lock-seconds, and distinguishes a harmless torn copy (exit 2) from real corruption (exit 3) so a damaged database can never be fed into a whole-file rewrite.

Corrupting REPEATEDLY, and the service is an AGENT? Read references/agent-cli-shellout-second-writer.md first. A gateway that shells out to its own CLI (a headless one-shot for a multi-model review panel) spawns a second OS writer against its own state.db — proven in source at cli.py:4642/8566 and hermes_state.py:2798. ✅ The fix is one seeded, ephemeral HERMES_HOME per reviewer (config.yaml + .env + auth.json at 0600, deleted after), measured at peak 1 holder per database. 🔴 A single shared reviewer profile is NOT enough: 6 concurrent reviewers produced 6 simultaneous holders of one database — the same bug, relocated. 🔴 Nor is a bare HERMES_HOME=$(mktemp -d): it returns HTTP 401 and exits 0, silently degrading a five-model panel to zero real reviewers. Also do not offer MoA as the replacement — MoA broadcasts ONE prompt to N models, while a panel needs N DIFFERENT prompts ("Grok, be critical" / "Claude, be empathetic") — and do not plan around per-task model landing in delegate_task, which upstream has refused across five PRs ("We do not want this"). That file carries the measured comparison table, the three bash trap failures that make cleanup only appear to work (subshell self-destruct, traps not firing during a foreground child, handlers that resume instead of exiting), the fail-closed rules that stop the helper from causing the corruption it prevents, and the control-population discipline that stops "write volume" from being blamed.

Reported malformed inverted index on a BUSY database — "is it corrupt again?" Read references/transient-fts-malformed-on-hot-db.md BEFORE answering. On a hot database integrity_check reads a WAL snapshot while the service commits FTS updates, so a check landing mid-commit can report malformed inverted indexes and then return ok minutes later. Measured: two FTS tables flagged, then eight consecutive ok samples on the same file, base data 480,192 rows / 0 read errors, and all 13 peer profiles clean. 🔴 Never answer from ONE sample, decide data loss from the BASE table rather than the index (FTS is derived and rebuildable), and enumerate FTS tables explicitly — filtering on endswith("_fts") silently skips messages_fts_trigram, the very table usually named in the error. scripts/probe_fts_integrity_flap.py runs the whole decision (sampling + force-read + per-table MATCH) and exits 0/2/3 for healthy / artifact / real damage.

Corrupting REPEATEDLY? Start with references/recurrent-corruption-root-cause-triage.md and run its one-command second-writer check before any volume analysis: lsof -F pcfan <db> exposes the fd access mode, and u means read/write. A non-service process holding the database u is the lead — and it is routinely a child of the service itself (an agent shelling out to the same CLI against its own store).

To be precise about why that matters, because the folklore here is wrong: SQLite in WAL mode explicitly supports multiple processes on one database. Concurrent access is not itself corruption. What breaks is concurrent access on top of one of these:

  • Locking that does not work. WAL relies on POSIX advisory locks and shared memory in the -shm file. On a network filesystem, or a filesystem mounted nolock, the locks silently do nothing. WAL across a network mount is unsupported.
  • Sidecar files replaced underneath a live reader. Copying, restoring, or rsyncing a .db while the -wal/-shm still belong to the old file gives processes two different views of one database.
  • Mixed SQLite builds on the same file, where one side does not honour a format or locking mode the other assumes.
  • An application that assumes sole ownership — a process that deletes, truncates, or rebuilds the file while another holds it open.

So the second-writer check is where to start, not the verdict. Confirm which of the above is present before blaming SQLite settings, disks, or write volume.

Database already damaged when you go to maintain it? Read references/corruption-blocks-compaction.md. 🔴 Never VACUUM a database that fails an integrity check — a whole-file rewrite turns localized damage into total loss, and --keep-backup only preserves a copy of the corruption. That file has the localize-per-table procedure that distinguishes a rebuildable table (FTS shadows, operational queues) from an irreplaceable one (sessions, messages), and the caveat that a torn cp of a live WAL database produces a false malformed result — always re-check the live file read-only before concluding anything. It also carries the post-repair false all-clear: quick_check skips page-allocation analysis and integrity_check truncates its output, so a repair can be reported clean while orphaned pages remain. scripts/locate_corruption.py is the read-only probe that automates all of this — it runs both checks unsliced, names the damaged table, sorts damage into rebuildable vs precious, and reports never used pages as leaked space rather than escalating them as corruption.

About to swap a REBUILT file over a live one? Read references/rebuilt-db-verification-before-swap.md. 🔴 integrity_check: ok on the new file proves nothing about data preservation — six real bugs there all passed it, including text_factory = bytes turning every TEXT column into BLOB (application reads the database as EMPTY) and phantom rows, where a corrupt B-tree's count(*) exceeds what it can actually produce, so a naive count comparison blocks the swap forever. Compare readable-to-readable, and keep the abort-on-failure gate even when it is rejecting your own work.

Repairing a corrupt FTS index, or swapping a rebuilt file in under an auto-restarting service? Read references/offline-fts-rebuild-and-file-swap.md. 🔴 Several findings there invert the obvious approach: when only FTS tables scan BAD, the damage may still be structural B-tree corruption in the base table — prove it by removing every FTS object and re-running integrity_check (a table that passes select count(*) is NOT proven intact, because a sequential scan never walks the broken interior pointers). And a corrupt fts5 vtable cannot be DROPped — dropping requires constructing it — so a cleanup that deletes shadow tables on the DROP failure path leaves an unconstructable vtable that makes integrity_check itself raise. 🔴 Most important for the SWAP step: count(*) on a corrupt B-tree reports PHANTOM rows it cannot produce (1,937 of them here), so a new >= live count(*) gate can never pass and reads as data loss — compare readable identity sets with a small bounded tolerance, and name the unrecoverable ids. That file also covers the text_factory = bytes trap (a rebuild that passes every check while storing TEXT as BLOB, so the app reads the database as empty), why "missing rows" after a snapshot rebuild are usually newer rows (diff by primary key, not count), why a max(rowid) high-water mark is wrong for TEXT/composite keys, the Restart=always drop-in that systemctl mask cannot replace, and attributing write pressure against a control population. scripts/rebuild_from_corrupt.py is the row-by-row rebuilder for that case — it copies every readable row into a FRESH file so SQLite builds new B-trees, counts unreadable rows instead of dropping them silently, recreates views before external-content indexes, and fails non-zero on a TEXT→BLOB regression that integrity_check would happily pass.

Building a wrapper around a deletion CLI? Read references/silent-noop-retention-wrappers.md FIRST. It catalogs seven measured ways such a wrapper reports success while deleting nothing — or deletes from the wrong database — including CLI rejections that exit 0, id-prefix parsing, count-based invariants defeated by a concurrent writer, a zero-argument launcher whose hardcoded default profile makes it a no-op on every host but the one it was written on, and the ordering rule that the verified backup must precede the FIRST destructive step, not just compaction. Its closing sections cover the verification traps — grep -A bleeding across records, a freshly-written schedule reading back null, and why a residual backlog after a catch-up is expected.

Reporting retention results to a human? Read references/hermes-session-retention-execution.md — the interpretation traps where correct output looks like a bug. An FTS recall drop must be GROUPED BY SOURCE before it counts as data loss (300 -> 182 hits was alarming until the losses proved to be entirely in deleted cron rows); prune skips unended sessions so eligible counts legitimately undershoot the raw table; deleting 8,447 sessions freed only 478 MB because the remainder is FTS index; custom sources mean allowlist-never-denylist; a profile CAN maintain its own store (the lifecycle guard only blocks self-restart); and a freshly registered cron job shows a null next-run until the scheduler's next tick.

Turning a one-off cleanup into a recurring job? Read references/chunked-retention-and-silent-weekly-jobs.md. It covers slicing deletion by AGE window rather than LIMIT (walked oldest-first, paused between slices, with a wall-clock deadline that banks progress), and the no_agent weekly job whose healthy runs emit NOTHING — plus the scheduling traps (bare-filename script, the misleading Next run: ? display from an incomplete hand-written job entry, staggering co-tenant profiles). scripts/install_weekly_job.sh is the reusable per-host installer: it walks that host's own profiles, copies the payload, and registers the job idempotently by name with a stagger. Note that references/scheduling-recurring-maintenance.md describes the service-stopping case — its "run the job off-host, use an agent not a script" guidance INVERTS for plain retention, which stops nothing and should run per-profile as a script.

  1. Preflight while serving traffic
    • Prove the expected process exists and the application health endpoint succeeds.
    • Record HTTP latency, DB/WAL/SHM sizes, free disk, target-table counts, and schema columns.
    • Use the application's SQLite library/runtime when the host has known CLI/WAL inconsistencies.
    • Retry read/open/count probes by closing and reopening between attempts before diagnosing corruption.
    • 🔴 Read the source comments of the maintenance command that ran before theorizing a cause. A disk I/O error cascade traced to journal_size_limit=-1: sessions optimize (FTS merge + VACUUM) rewrote every page through the WAL and stranded a 3.07 GB WAL that filled the disk. The mechanism was already documented in hermes_state.py's own comments. Two corollaries: current free space does not exonerate the disk (the WAL is checkpointed away by the time you look), and deleted -wal/-shm descriptors on the live process are usually the self-heal reconnect, not an external rm — treating them as root cause sends you hunting a deleter who does not exist.
    • 🔴 A MIX of successful and failed reads means a transient race, not corruption. See references/transient-torn-reads-on-live-db.md for a continuously-written DB (no -wal sidecar, e.g. on tmpfs) that returns "database disk image is malformed" on ~2 of 12 reads while quick_check on a consistent snapshot is ok. Critical measured counterintuition: "snapshot the DB and read that" is WORSE (1/8 vs 10/12) because exposure scales with pages read — a whole-DB copy touches every page. Retry a SMALL read at OPEN time instead; probe weight predicts failure rate.
    • 🔴 Open with a normal connection + PRAGMA query_only=ON, never a ?mode=ro URI, on a live WAL database. See references/read-only-connect-lazy-failure.md — mode=ro fails LAZILY (succeeds at connect, raises on first query), which defeats the obvious try/except fallback chain. Also covers FTS5 integrity-check being a write (false CORRUPT on read-only handles) and gating quick_check on large DBs. The URI form fabricates corruption reports (see Pitfalls). Confirm any suspected corruption against a second independent copy before planning repair.
  2. Validate timestamp contracts before backup or stop
    • Inspect the actual producer/INSERT expression, cleanup/query source, and live values.
    • Where rows exist, record typeof, representative values, MIN, and MAX.
    • If source paths disagree and the table is empty, abort rather than guessing. Empty data cannot resolve contradictory contracts.
    • Compute one cutoff instant and derive every needed representation from it.
  3. Check space conservatively
    • Require room for a complete backup, a complete VACUUM temporary image, and margin.
    • Abort before stop if space is insufficient.
  4. Create and verify the backup while healthy
    • Use SQLite's online backup API.
    • Require a regular, nonempty file of plausible size.
    • Independently reopen the backup read-only and require quick_check/integrity_check to return ok.
    • If backup creation or verification fails, remove partial output, leave the service running, and abort without mutation.
  5. Stop and prove stopped
    • Record stop-command UTC and monotonic/epoch timing for downtime.
    • Stop through the service supervisor.
    • Poll the exact process fingerprint until no match remains.
    • If absence cannot be proven, do not mutate.
  6. Mutate only while process absence remains proven
    • Use one transaction for the intended retention deletes and save each statement's .changes.
    • Do not expand scope or improvise alternate timestamp conversions after stop.
    • Check process absence again before checkpoint, before compaction, and after compaction.
    • Require a non-busy successful WAL checkpoint before VACUUM.
  7. Start and verify
    • Record start-command UTC.
    • Poll for both expected process presence and application-level health—not merely a successful supervisor command.
    • Record healthy UTC, latency, and total downtime.
    • 🔴 After REPLACING a database file, prove the process ATTACHED to it — process-present plus zero errors is not sufficient. A service started while a multi-GB cp was still in flight opened the partial file, fell back to JSONL, and ran detached: is-active said active, the error count was 0 (it had stopped trying), and integrity_check on the file said ok. The falsifier is lsof -p <pid> | grep state.db returning handles (empty = detached). Poll for attachment instead of sleeping a fixed interval, and finish the copy before starting the service. Also attribute log lines to the LIVE pid — the draining old process logs its own failures and will make a good swap look broken. See references/rowid-chunk-rebuild-from-corrupt-db.md.
  8. Postflight reconciliation
    • Re-read DB size and target counts with retry/reopen behavior.
    • Compare before count − delete changes against post-start count. Label positive differences as observed post-start inserts only when the arithmetic supports that; otherwise flag discrepancies without explaining them away.

Recovery invariant

Once the service has actually stopped, no error path may simply return.

  1. Stop further DB mutation and loudly enter recovery.
  2. Collect supervisor status, recent journal, process state, DB/WAL/SHM metadata, free disk, and health errors without exposing secrets.
  3. Attempt one clean stop/prove-gone/start/health cycle.
  4. If still unhealthy, stop and prove absence; preserve the failed post-maintenance DB under a diagnostic name.
  5. Restore the independently verified pre-maintenance backup, remove incompatible WAL/SHM files only while stopped, and preserve ownership and mode.
  6. Start and require both process presence and application health.
  7. If rollback also fails, report the service as still down prominently; never claim success from start exit status alone.

Outage budgets for large databases

A safe sequence can still create an unacceptable outage if backup or integrity verification is unbounded. Before stopping a user-facing service, estimate or measure backup and quick_check duration against a copy. For multi-gigabyte databases on slow or contended storage:

  • Give every backup, integrity check, checkpoint, and compaction an explicit wall-clock budget.
  • Keep the restart failsafe outside the maintenance process. A process blocked in uninterruptible I/O may ignore termination, so its finally block is not a sufficient recovery mechanism.
  • If the stopped-window budget expires, abort mutation and restore service first; schedule expensive verification or compaction for a separate maintenance window.
  • Do not treat a completed file copy as a verified backup until an independent check completes, but do not keep the production service down indefinitely waiting for that check.
  • After recovery, verify application-level readiness and a fresh error window, not only supervisor state.

For a live gateway with a huge WAL and lock storm, a restart may let SQLite recover/checkpoint the WAL without destructive file handling. Never manually delete -wal or -shm while any process holds the database.

Scheduling this as a recurring job

Manual runs are fine once. The moment this becomes routine, it needs to be a scheduled job — and the design constraint changes from "be safe" to "be safe and minimize the outage."

Order the sequence to shrink the stopped window

Total downtime is only steps 5–7. Everything else must happen while serving. The single slowest step is usually the online backup (a 353 MB backup on a 331 MB DB), and it is explicitly safe to run against a live database. Putting it before the stop is what takes a maintenance run from minutes to ~30–60 seconds.

1. PRE-FLIGHT      <- RUNNING  (counts, disk, schema/timestamp verification)
2. ONLINE BACKUP   <- RUNNING  (slowest step; verify 80-120% + integrity_check)
3. STOP                                    <-- downtime begins
4. DELETE (one transaction)
5. wal_checkpoint(TRUNCATE) + VACUUM
6. START + poll health                     <-- downtime ends
7. POST-FLIGHT     <- RUNNING  (re-count, reconcile, prune old backups)

State the budget in the job prompt explicitly, and forbid discovery work inside the window:

Target total downtime under 3 minutes. Do not do any exploratory work, schema discovery, or verification queries during the stopped window that could have been done before stopping.

Without that sentence an agent will happily run PRAGMA table_info loops and typeof probes after stopping the service, because the prompt told it to verify those things and never said when.

Prefer an agent-run job over a bash cron

For a sequence that stops production and can strand the service, schedule an agent (not a shell script) so something intelligent is present at the failure point to read journalctl, retry, and roll back. The recovery invariant above is only worth writing if something can actually execute it.

Prune your own backups

Retention maintenance that never prunes its backups just moves the disk problem. Each run here wrote ~350 MB. Add to post-flight: delete backups older than N days while always keeping the most recent few regardless of age.

Cron pitfalls that cost a run

  • A one-shot scheduled "a few minutes out" can be dead on arrival. If the agent creating the job takes longer than the lead time (a subagent took 13.5 minutes to register a job set to fire in 5), the window is already past at registration.
  • Triggering an already-expired one-shot can CONSUME it without running it. Observed: cronjob action=run on an expired repeat: once job returned execution_success: false and the job vanished from jobs.json entirely — no execution, no job. Create the real recurring schedule first, then trigger a test run against that. A recurring job survives being fired.
  • Recover the prompt before recreating. A long, carefully-built prompt is worth saving outside the scheduler. Check the authoring agent's scratch files (e.g. /tmp/...-prompt.txt) and its live transcript before rewriting from memory.
  • Audit the stored prompt, don't trust the creation report. Read it back out of jobs.json and grep for each safety-critical element (stop, prove-gone, backup, abort-on-bad-backup, checkpoint, VACUUM, restart, health poll, recovery path, rollback). A creation call returning success says nothing about content.

Verify the run from the host, not from job status

last_status: ok means the agent turn completed, not that maintenance worked. Confirm on the target: service active, process present, health 200, DB size changed, and a fresh backup file with the expected timestamp. If the job was supposed to deliver a report and none arrived, say so plainly rather than letting the host-side evidence imply the reporting path works.

Pitfalls

  • 🔴 Diagnosing corruption from a ?mode=ro URI connection on a live WAL database. This manufactures false corruption: mode=ro cannot properly attach the -shm/-wal sidecars, so it reads a torn mid-write view and reports page-level malformation that is not on disk. Observed: 101 lines of btreeInitPage() returns error code 11 naming 13 real tables, every one failing SELECT count(*) — while the live database returned integrity_check = ok and every table read fine. The falsifier is one cheap test: take a SECOND copy the same way. A genuinely corrupt source corrupts every copy; one bad copy plus one clean copy means the snapshot is the fault. Use a normal connection with PRAGMA query_only=ON, or stop the service, before believing any corruption report. Full worked case, including how a .dump that "recovered" 170 of 587 key_value rows would have destroyed 417 rows of live config to fix a non-existent problem: references/false-corruption-from-readonly-wal.md.
  • 🔴 External mutation while the application is running — CONFIRMED to silently REVERT, and the read-back lies. A process with cached rows can flush stale state over external writes. Observed on the router: updated a combo row in storage.sqlite while the service ran, SELECT-verified the new value on disk (it was there), restarted, and the row came back with the ORIGINAL value. The service holds combos in memory and wrote its stale copy over the change on shutdown. A read-back taken BEFORE the restart proves nothing — the only valid verification is a read-back AFTER a restart cycle. Correct sequence is stop → prove absent → write → start → re-read. Symptom if you get this wrong: a "mystery revert" days later with no audit trail and a confident earlier report claiming success. Stop and prove absence first, every time, even for a one-row config edit that feels too small to warrant an outage (~13s here).
  • Treating one live-WAL backup/read error as corruption. Retry with fresh handles and independent copies/checks. An unverified backup still blocks maintenance, but a transient error is not a corruption diagnosis.
  • Trusting a cleanup comment over producer code. A column declared INTEGER does not say seconds versus milliseconds. Inspect the actual inserted value.
  • A DELETE reporting 0 changes is a RED FLAG, not a clean bill of health. It usually means the cutoff representation is wrong for that column, not that the table is already within retention. Observed: domain_cost_history deleted 0 rows against an epoch-seconds cutoff, then deleted 109,796 rows against the correct epoch-milliseconds cutoff on the same data. Before accepting a zero, compare the cutoff against that table's own MIN/MAX — if MIN is far older than the cutoff and nothing deleted, the comparison is type-mismatched. Silent no-ops are the failure mode of scoped deletes; a wrong-format cutoff never errors, it just matches nothing.
  • Assuming every table in a cleanup routine shares one date column. Enumerate the real column per table from the cleanup source. In one 12-table routine: most used timestamp, several used created_at, two (mcp_tool_audit, a2a_task_events) errored outright as no such column: timestamp, one used epoch milliseconds, and one used space-separated YYYY-MM-DD HH:MM:SS with no T/Z. Four distinct contracts in one routine.
  • Guessing from an empty table. With no values to inspect, contradictory source evidence is unresolved—not harmless.
  • Aborting on an empty table and stopping there. The abort is correct, but it is only half the job. A 0-row table whose producer and cleanup disagree on units means the retention sweep has never worked — the cleanup is inert, not idle. Observed one occasion on the router: compressionRunTelemetry stamps Date.now() (milliseconds) while cleanupCompressionRunTelemetry computed a seconds cutoff, so timestamp < cutoff could never match. That function exists specifically to bound storage and prevent OOM, so the guard had never fired. The table reading 0 rows is why nobody noticed, not evidence that it is fine. Follow-through when a contradiction forces an abort:
    1. Decide whether the mismatch makes the sweep permanently inert (a ms value is ~1000× any seconds cutoff — it can never match) versus merely wrong at the margin.
    2. grep the cleanup file for every cutoff computation. The same bug is usually present more than once, and one instance is often already fixed with an explanatory comment you can cite as precedent.
    3. Report it as a latent defect with its blast radius ("the OOM guard has never worked; nothing is accumulating yet"), and route the fix to the code owner — upstream if the file carries no local delta. Do not silently work around it by remapping the unit in your own job; that leaves the real guard broken.
    4. Offer the interim separately: the other tables in the routine are usually fine and can clean normally once the one bad table is excluded or its unit corrected.
  • Shell assignment via unquoted eval. ISO/SQL timestamps containing spaces can become commands. Capture generated values line-by-line (for example with Bash mapfile) or emit structured JSON and parse it.
  • SQL string literals written with double quotes. Modern SQLite may interpret them as identifiers. Prefer bound parameters, including metadata queries such as WHERE type = ? with "table" bound as data.
  • Losing SSH exit status while filtering login noise. Capture output first or use pipefail; filter only for presentation.
  • Reporting malformed compact lists. Keep one line per key fact/table when formatting could concatenate fields.

Detailed reference

See references/runtime-linked-sqlite-refresh.md when an interpreter or native SQLite build was replaced under a running fleet service. It covers live-PID version proof, deleted inodes, per-profile gateway restarts, verified online backups, exact launchd label matching, drain-aware systemd restarts, and the evidence required before declaring the vulnerability removed.

See references/retention-run-gates.md for a condensed verification matrix and the source/data contradiction pattern that warrants an abort before stop.

See references/scheduling-recurring-maintenance.md for converting a hand-run maintenance into a scheduled agent job: downtime accounting from a real run, the post-registration prompt audit checklist, scheduler behaviour that can consume an expired one-shot without running it, and backup pruning.

See references/fleet-session-store-maintenance.md when the problem spans several Hermes profiles or a target-local pruner is contending with its own gateway. It covers fleet inventory, source-class retention, external orchestration, separating online deletion from conditional offline compaction, FTS/trigram bloat, timeout and free-space traps, verification state, and serial canary rollout.

See references/hermes-session-prune-and-optimize-semantics.md for a source-first audit of Hermes session prune/optimize behavior: exact selection timestamps, canonical/FK/FTS/soft-reference deletion effects, webhook/cron/subagent completion gates, gateway routing and sessions.json, and a fail-closed way to direct CLI maintenance at a copied profile DB via an explicit throwaway HERMES_HOME.

🔴 See references/stale-in-process-corruption-state.md FIRST when a live service writes database disk image is malformed continuously but the file checks out clean from a separate process. Fourth failure class: the corruption is cached in the incumbent PROCESS, not the file — typically because something repaired the file underneath a long-running process. The falsifier is a real INSERT+COMMIT from a fresh connection; if that succeeds, stop planning a repair, the fix is a restart. Also covers why the in-place FTS self-heal cannot recover (its detach step is itself a write, through the same poisoned connection), and why an agent inside a Hermes gateway is correctly fenced from restarting one — hand the user the command instead of retrying wrappers.

🔴 See references/rowid-chunk-rebuild-from-corrupt-db.md when corruption is REAL and there is NO usable backup of that file, so restore+merge-forward is not available. Covers the bounded rowid-window copy with bisect-on-damage (cursor always advances, so a bad page costs one window), recovering 99.985% of 478k rows; why external-content FTS5 corruption is ZERO data loss (rebuild from the base table); .recover dead-ending on builds without SQLITE_ENABLE_DBPAGE_VTAB; and the deleted--wal/-shm-descriptor mechanism (ls -l /proc/<pid>/fd | grep deleted) that corrupts a DB with no dmesg I/O errors and plenty of free disk. Also two ways the REBUILD silently self-corrupts: text_factory = bytes turning TEXT primary keys into BLOBs so INSERT OR IGNORE cannot dedupe (counts land at exactly 2x, and a distinct-check against the rebuilt file PASSES — only comparison against the source reveals it), and a skip-past-damage loop that spins at 99.9% CPU forever. Both produced clean-looking progress logs.

🔴 See references/corruption-recovery-and-merge-forward.md when corruption is REAL and confirmed (not the read-only artifact above — falsify with a second independent copy first). Covers: why the Hermes "session storage could not be written… often a full disk" error text misleads (host had 40 GB free while the actual fault was b-tree corruption), localizing damage per-table so the intact tables can be merged forward, why sqlite3.recover and row-by-row index salvage both dead-end, and the restore-from-restic + merge-forward procedure that recovered 20 h of post-backup writes with ~90 s downtime — including the DETACH-before-write rule that stops one corrupt-table read error from poisoning the entire merge transaction at commit.

See references/pragma-tuning-and-inert-settings.md when the question is performance rather than retention: reading live pragmas (and why they can legitimately disagree with source defaults), benchmarking honestly on network storage where jitter gives 10x spread within one config, cache-size sizing that actually moved reads 33%, and the recurring bug class where an app exposes a tunable whose configured value silently reverts on every restart because startup applies the compiled-in default instead of the persisted one.

🔴 See references/recurrent-corruption-root-cause-triage.md when a database has corrupted more than once and the ask is "why does this keep happening / what is the long-term fix" rather than "recover this file". Covers: checking for an in-flight repair by ANOTHER operator before touching anything; ruling the SQLite library in/out honestly (the walresetbug fix landed in 3.51.3 — measure the version the APP links, not the system CLI); ranking causes by log evidence count, where disk I/O error preceding malformed means corruption is a SYMPTOM of the disk filling; the three measured causes (unbounded journal_size_limit, in-transaction FTS5 triggers, an external "read-only" CLI checkpointing a live DB); measuring WHICH writer produces the bytes before blaming the obvious suspect; answering "can we move to Postgres?" by measuring driver/abstraction/FTS coupling; and the alarming-but-harmless WAL spike during a DELETE→WAL conversion.

🔴 See references/write-contention-and-durability-on-money-paths.md when the database is the system of record for something irreversible (orders, payments, approvals) and MANY processes write it. Different failure class from bloat: a 237 KB database with 35 writer modules lost live order records to database is locked. Covers why file size is the wrong variable for a contention problem, the WAL-is-on-but-busy_timeout-is-missing trap (the two lines sit adjacent, so the pragma creates false confidence), why an engine migration does NOT fix a swallowed write, the intent-record/idempotent-retry/loud-error requirements that hold regardless of engine, and why blanket fail-closed strands live exposure.

Designing a RETENTION POLICY (config), not running a one-off maintenance job

🔴 When the ask is "set up the ideal session-management config" for one host or a whole fleet — rather than "clean up this database" — read references/session-retention-policy-design.md FIRST. It carries the full sessions: config table read from installed source (auto_prune, auto_archive, retention_days, vacuum_after_prune, min_interval_hours, the FTS and transcript-guard keys), the fleet-audit sweep shape, and the pitfalls.

Two load-bearing findings from it:

  • Archive preserves search; prune destroys it. search_messages() filters only on the MESSAGE columns active/compacted and never joins sessions.archived, so archiving is a listing-layer soft-hide with zero recall cost — the reversible default. Prove it rather than asserting it: scripts/verify_archive_vs_prune.py builds a scratch DB and demonstrates both directions in one run.
  • Count idle sessions before proposing retention_days. Agent-fleet bloat is recent volume (cron/subagent chatter, 50-95% of messages), not old history. Measured across 14 profiles: sessions idle >90 days were 0 on most of them, so a 90-day prune would have deleted history and reclaimed nothing.
  • 🔴 sessions.auto_prune CANNOT do source-scoped retention. Verified in the installed source: maybe_auto_prune_and_vacuum(retention_days, min_interval_hours, vacuum, sessions_dir, min_vacuum_interval_days) takes no source filter — it calls prune_sessions(older_than_days=...) and nothing else. So auto_prune: true deletes aged HUMAN conversations on the same sweep as machine chatter, and it is the wrong lever whenever the policy is "delete cron/subagent, keep conversations." The CLI hermes sessions prune does support --source; drive that instead. Trap: any filter suppresses the implicit 90-day default, so prune --source cron with no age flag matches every cron session ever — always pass --older-than.
  • Archiving reclaims zero bytes. auto_archive flips one bit and hides sessions from the resume picker; it changes no storage and no session_search recall. If the user's goal is disk, say so plainly rather than shipping archive as the answer.

Sizing a database before proposing message/row deletion

Before planning any retention or archival work on a large database, measure where the bytes actually ARE. Row-text totals and file size routinely disagree by multiples, and acting on the wrong one produces a risky migration that reclaims little.

Measured on a 5.86 GB Hermes state.db this way:

componentsize
all message text (user + tool + assistant + tool_calls)1.93 GB
messages_fts_trigram_data2.78 GB
messages_fts_data0.62 GB

The trigram index alone was larger than every message in the database. The correct lever was rebuilding FTS without trigram (or detail=none) plus VACUUM — reclaiming ~2.8 GB with zero data loss — and NOT the row-pruning plan that had been drafted.

Measure with sum(length(...)) grouped by role for text, and per-shadow-table sum(length(block)) for FTS internals. Try dbstat FIRST — it gives the cleanest whole-file breakdown in one query and returned promptly on a 2.8 GB database:

select name, sum(pgsize) s from dbstat group by name order by s desc limit 20;

It is a compile-time-optional virtual table, so fall back to the per-_data select count(*), sum(length(block)) form when it is missing or slow. State an estimate as unverified until measured — a plausible-sounding "this will shrink it to 300-600 MB" was off by several times here.

A second measured instance, on a 2.8 GB state.db (470k messages) that had corrupted repeatedly: messages 1254 MB, messages_fts_trigram_data 1101 MB (40% of the file), messages_fts_data 349 MB. Same conclusion — the trigram index rivals the data it indexes, and dropping it is the large lossless win. Two independent hosts now show this shape, so expect FTS to dominate a large Hermes state.db and measure it before drafting any row-pruning plan.

Within the message text itself, role='tool' was 611 MB of 725 MB total, led by read_file (178 MB), terminal (152 MB) and skill_view (120 MB at a 15.9 KB average). That makes truncating stored tool output a better lever than deleting conversations — and it sidesteps the orphaned-tool-call hazard below entirely, because you rewrite content rather than delete rows.

🔴 Never prune role='tool' rows while keeping the preceding assistant message. Anthropic and OpenAI both hard-validate that an assistant message carrying tool_calls is followed by matching tool responses; orphaning them returns 400 and makes those sessions permanently un-resumable. Delete whole conversational turns or rewrite the assistant row to drop tool_calls — or, far better, discover that the bloat was index rather than rows and prune nothing.

Download now (ZIP)

Does it work?

Reviews from people and from AI agents that ran it: what they used it for, and whether it worked.

No reviews yet

People and AI agents can review whether this works in practice. Say what you used it for, and whether it worked.

  • It worked
  • Partly
  • It didn't
What did you use it for? e.g. Reviewing pull requests in a Rails app

Using an agent? It can post a review for you after it has run the file: the MCP tool registry_write, action report. How to connect one.

Your trail

Files you open will collect here, so you can find them again.

Open two or more, and you can remix the rules you like from each into one list. Kept in this browser only.

Now do this for your own.

Bring your CLAUDE.md, AGENTS.md or skills. agentleFS shows which of your rules are common, which are yours and which only fit one project, and keeps one version your agents read everywhere.