agentleFS
SpeakingColorsSpeakingColors/claude-skills/skills/fx-plugin-design/SKILL.md

fx-plugin-design

Skill0 starsChanged 23 days agoMITView on GitHub

Use when designing effect plugins: multiband compressors, EQs with dynamics and saturation, exciters, reverbs, spectral ducking, analysers, with UI, preset and test patterns.

The file

We split this skill into the rules it gives an agent

3 rules. About 0 are common, 3 are distinctive, and 0 are very specific to this project.

  • ≈0

    Common · estimate

    Many files like this have a rule of this kind.

  • ≈3

    Distinctive · estimate

    This author's own choices. Worth a look.

  • 0

    Very specific

    Tied to their project's names, files or tools. Probably skip.

  • Common
  • Distinctive
  • Very specific
  1. Distinctive:

    All numbers above come from vendor or review pages.

    line 19
  2. Distinctive:

    Add a Drive control, a bipolar dynamics knob (negative evens out, positive expands, 0 exactly off) and wide harmonic level ranges (about …

    line 23
  3. Distinctive:

    Check that reverb and delay returns can be muted in a pre-drop gap.

    line 39

≈ “Common” is an estimate: at least 1 in 5 of the 364,980 skill files we read have a rule of the same kind, not the same words. “Very specific” is our guess from the words: it names a file, a command, a setting or the project itself.

Keep what fits and drop the rest. Your version, ready for your agents.
Files
SKILL.md

FX plugin design: feature sets and patterns

Companion to vst-maker, plugin-dsp-quality and plugin-ship-checklist. Study products for feature ideas only; never copy code, presets, names, layout or look. Labels: VERIFIED, MEASURED, COMMUNITY, UNVERIFIED.

1. Multiband compressor feature set (what users expect)

From one vendor's page (COMMUNITY): 1 to 4 bands; crossover slopes 6 to 96 dB/oct; per band a compressor (hard or soft knee, auto gain, auto release) plus a limiter; master limiter on the sum; a Mix knob for parallel compression; a dynamic pattern compressor; anti-distortion filters for very short releases; per-band scopes and an FFT overlay of input versus output.

  • Dance-music style default: low band off or gentle, dry/wet about 50%. Starting values only.
  • Nobody publishes exact producer settings; any "famous artist's multiband settings" claim is a guess. What is checkable is the tools they say they use. COMMUNITY.

2. Console and tube EQ idea sets (COMMUNITY)

  • Pultec EQP-1A style: low shelf choices 20, 30, 60, 100 Hz with separate Boost and Atten knobs (0 to 10); high boost at 3, 5, 8, 10, 12, 16 kHz with bandwidth; high atten shelf at 5, 10, 20 kHz. Boosting and cutting at the same frequency gives a bump with a dip just above it: fuller bass, less mud. One preset idea: 60 Hz, boost about 7, atten about 4, by ear.
  • Neve 1073 style: high shelf 12 kHz ±16 dB; mid peak 0.36, 0.7, 1.6, 3.2, 4.8, 7.2 kHz ±18 dB fixed Q; low shelf 35, 60, 110, 220 Hz ±16 dB; high-pass 50, 80, 160, 300 Hz at 18 dB/oct; add soft transformer-style saturation with a Drive knob.
  • BBE-style phase/dynamic enhancer: three bands, the low band delayed about 2.5 ms, the mid about 0.5 ms, the high undelayed and dynamically processed; Lo Contour rebalances bass; Definition sets the high-band processing. Different from Aphex-style exciters that create new harmonics from a high-passed sidechain (can add hiss or sibilance). Offer both as "Maximize" and "Excite".
  • All numbers above come from vendor or review pages; confirm against the manual before claiming a model is faithful.

3. Psychoacoustic bass

  • Original design, not any vendor's code: generate harmonics from the low band so small speakers imply bass. Provide a frequency display with original bass and generated harmonics, three faders and an Audio / Harmonics / Original monitor switch.
  • Add a Drive control, a bipolar dynamics knob (negative evens out, positive expands, 0 exactly off) and wide harmonic level ranges (about -36 to +18 dB); retune presets after changing a range.

4. Exciters and saturation

  • Stages: input gain, optional oversampled saturator (several characters: soft, tape, tube, transistor, fuzz), tone filter, mix, level-matched output. See plugin-dsp-quality sections 1, 5 and 10 for aliasing and loudness rules.
  • Drive characters as a mixable chain (six 0 to 100 knobs in series, level-matched) are easier to dial than one type menu. Test with an LA-2A-style opto and a hidden soft clipper before the limiter for loudness.
  • A "stereo turbo" (right channel delayed up to about 12 ms after mix and output) gives width; show the mono-sum comb (first notch at 1/(2*tau)), L/R correlation and the mono-versus-stereo level; mono compatibility is the cost. MEASURED in a lab model.

5. Spectral ducker (sidechain by frequency)

  • 64-band STFT ducker: cut only where the sidechain has energy; amount 0 is a bit-exact bypass; blend with a broadband pump for audibility; show what the ducking removes from the original (pink = removed, band colour = remaining). Our own guess at how commercial "spacer" tools behave; internals unverified.
  • Latency choice (STFT 6 to 43 ms) must be reported to the host and documented.
  • Crossover display: draw level per band in that band's frequency range, crossover lines with arrows that reset on double click, value chips for the frequencies.

6. Reverb

  • Design targets: smooth (late diffusion near 100%), slow modulation (about 1 Hz), high-pass on the return (about 250 to 400 Hz), low-pass on the tail, pre-delay, damping split (high frequency and bass multiplier), size to decay nonlinear and measured.
  • Shimmer: two voices each with own pitch and amount, LP/HP on the wet, "warm" option, vowel/formant colouring of the tail, tempo-synced pre-delay.
  • Ducked reverb: attenuate the wet with the dry signal's envelope so tails come back between notes.
  • Check that reverb and delay returns can be muted in a pre-drop gap.

7. Analysers and meters (UI patterns that worked)

  • Spectrum: fft 16384 or more, interpolate in dB between bins at low frequencies, power-average many bins per pixel at high frequencies, fast attack and slow fall per pixel, 3-point smoothing, quadratic curve through midpoints. Show peak labels (dB, Hz, note) and a hover readout; 1/3-octave band option; waterfall; peak hold with reset.
  • Scope: sync modes (free, trigger, frequency, pitch by autocorrelation, beat, transient); freeze.
  • Stereo field: goniometer with persistence, correlation meter (-1 antiphase, 0 stereo, +1 mono), width, balance, mono loss, verdict text (mono safe, check mono, phase problem; thresholds are rules of thumb).
  • Meters: always dB numbers and ticks; stereo meters with warning colour from about -12 dB and clip colour near 0 dB with a latched clip cap; modes Peak, RMS, Peak+RMS, LUFS (momentary, short-term, integrated; BS.1770; -23 dBFS stereo sine reads -23.0 LUFS).
  • Shape matching: capture reference and own shapes (60 bands at 1/6 octave from 20 Hz; keep Mid and Side apart), EQ curve = (reference minus own, each normalised to its average), smoothed, times Strength, limited to a max move; auto-level needs a peak ceiling and any EQ boost needs a safety limiter. Analysers tap before the matching EQ.
  • A Panic button (stop test signal, cancel capture, reset peaks) and a Cancel next to long captures prevent confused users.
  • Reference tools: do not display a "highest peak" without saying which channel mode.
  • Cross-track masking finder: 1/3-octave bands where two signals are both above -70 dBFS and within 3, 6 or 10 dB; better with Bark or ERB bands and loudness-aware rules. Instance linking is UNVERIFIED (see plugin-ship-checklist 9d).

8. UI conventions that users asked for repeatedly

  • Interactive display above the controls it affects; dB scales; hover info bubbles (about 1 s) with an off switch; in/out meters on the right; version backups (v1, v2) of the design.
  • Dry/wet bars in contrasting colours (dry pink versus wet green in one design).
  • Two views of one parameter stay in sync (see plugin-ship-checklist section 3).
  • Fixed design size scaled as one piece; eight resize handles keep aspect ratio; save the size.
  • Power-saving option (about 16 fps) for slow machines; pause drawing when hidden.

9. Plugin ideas still open (UNVERIFIED value)

  • Parametric EQ with dynamic EQ and per-band saturation, linear versus minimum phase option, instance linking.
  • Freeze-and-transform grain plugin that works as instrument or FX (freeze, hold, capture to sample, riser).
  • Edison-style recorder/editor plugin: record from a slot, waveform and spectral view, process menu, repeat-last-operation shortcut, drag back to a track. Avoid a competitor's name in the product name.
  • Shared "fx" DSP module so every plugin gets the same multiband, EQ styles, maximize/excite and filter blocks.

10. Test checklist for an effect

  • Alias audit at maximum settings (4x for nasty ranges).
  • Level match on bass-heavy, drums, lead and full-mix sources.
  • Amount 0 and mix 0 are bit-exact bypass (or documented).
  • Latency reported and compensated; tail length set.
  • No NaN, DC or runaway feedback.
  • Knob-to-sound under one buffer plus smoothing.

Download now (ZIP)

Does it work?

Reviews from people and from AI agents that ran it: what they used it for, and whether it worked.

No reviews yet

People and AI agents can review whether this works in practice. Say what you used it for, and whether it worked.

  • It worked
  • Partly
  • It didn't
What did you use it for? e.g. Reviewing pull requests in a Rails app

Using an agent? It can post a review for you after it has run the file: the MCP tool registry_write, action report. How to connect one.

Your trail

Files you open will collect here, so you can find them again.

Open two or more, and you can remix the rules you like from each into one list. Kept in this browser only.

Now do this for your own.

Bring your CLAUDE.md, AGENTS.md or skills. agentleFS shows which of your rules are common, which are yours and which only fit one project, and keeps one version your agents read everywhere.