Configures Amazon Route 53 DNS: public and private records, traffic-steering routing policies, health checks, DNS Firewall, Route 53 Profiles, VPC Resolver (also known as Route 53 Resolver) for hybrid and Outposts networks, and Global Resolver. Applicable when the customer wants to point a hostname at a target, split or fail over traffic across endpoints, monitor an endpoint, block malicious domains, centralize DNS across accounts, or resolve private DNS across a hybrid network. Routes to the right per-task procedure in references. Does not cover CloudFront-specific setup or non-DNS networking.
Steady49 mentions in 2 weeks
1 project uses a version of this
3.4k5mo agoReviewMountCreate a free account to mount
Configures AWS Shield Advanced for enhanced Distributed Denial of Service (DDoS) protection: subscribing accounts and adding resource protections, enabling automatic application layer (layer 7) mitigation through AWS WAF, configuring health-based detection with Route 53 health checks, setting up Shield Response Team (SRT) access and proactive engagement, reviewing DDoS events and requesting cost protection credits, and aggregating resources into protection groups. Applicable when the user wants stronger DDoS protection for internet-facing resources (CloudFront, Application or Network Load Balancers, Elastic IP addresses, Global Accelerator, or Route 53 hosted zones), wants expert help during an attack, or wants to recover attack-driven scaling charges. Routes to the right per-task procedure in references. Not applicable for authoring AWS WAF rules (waf skill), creating Route 53 health checks (route53 skill), or org-wide Shield Advanced rollout with Firewall Manager (firewallmanager skill).
Steady49 mentions in 2 weeks
1 project uses a version of this
3.4k5mo agoReviewMountCreate a free account to mount
Configures AWS Site-to-Site VPN: creating an IPsec VPN connection between an on-premises network and a VPC, choosing the target gateway (virtual private gateway, transit gateway, or AWS Cloud WAN), choosing static or dynamic (BGP) routing, sizing tunnel bandwidth (Standard 1.25 Gbps or Large 5 Gbps), connecting many sites through a VPN Concentrator, applying the customer gateway device configuration, making a connection highly available, and monitoring tunnels with CloudWatch. Applicable when the user wants to connect a data center or branch office to AWS over an encrypted tunnel, choose how routes are exchanged, scale throughput, consolidate sites, or diagnose a down tunnel. Routes to the right per-task procedure in references. Not for AWS Direct Connect (its own service), Client VPN for individual remote users, the transit gateway side of a VPN attachment (transitgateway skill), or Route 53 DNS work.
Steady49 mentions in 2 weeks
1 project uses a version of this
3.4k5mo agoReviewMountCreate a free account to mount
Configures AWS Transit Gateway: creating a hub and attaching VPCs, segmenting traffic with route tables, centralizing egress and inspection through a hub (appliances or a Gateway Load Balancer endpoint), forcing east-west traffic between VPCs through AWS Network Firewall, connecting on-premises networks over the transit-gateway side of a Site-to-Site VPN or Direct Connect attachment (including ECMP to aggregate bandwidth across multiple VPN tunnels), peering transit gateways across Regions, migrating from a VPC peering mesh, and routing IP multicast. Applicable when connecting many VPCs through one router, isolating environments, forcing VPC-to-VPC traffic through a central Network Firewall, reaching on-premises over the hub, linking Regions, or moving off a peering mesh. Not applicable for single-VPC routing, VPC peering between two VPCs (vpcpeering skill), Direct Connect gateway or virtual interface setup (directconnect skill), or Route 53 DNS work.
Steady49 mentions in 2 weeks
1 project uses a version of this
3.4k5mo agoReviewMountCreate a free account to mount
Configures AWS WAF to filter web traffic: creating web access control lists (web ACLs) on CloudFront, Application Load Balancers, API Gateway, and AppSync; AWS Managed Rules tuned in Count mode; rate-based rules for HTTP floods; IP set and geographic match rules; Bot Control (Common and Targeted); turning bot labels into a confidence signal; stripping spoofed inbound x-amzn-waf-* headers; recovering the real client IP behind a CDN; Fraud Control (account takeover and account creation fraud prevention); and logging and request sampling. Use when the user wants to protect a web application or API from common exploits, bots, credential stuffing, fake-account creation, or HTTP floods at the application layer (layer 7). Routes to the right per-task procedure in references. Do NOT use for L3/L4 DDoS protection (shieldadvanced skill), multi-account WAF rollout (firewallmanager skill), CloudFront configuration (cloudfront skill), or Route 53 health checks or records (route53 skill).
Steady49 mentions in 2 weeks
2 projects use a version of this
3.4k5mo agoReviewMountCreate a free account to mount
Enables a multi-region AWS CloudTrail trail with S3 log storage, CloudWatch Logs integration, and CloudWatch Logs Insights queries for security monitoring and compliance auditing. Use when setting up centralized API activity logging across all AWS regions.
Steady49 mentions in 2 weeks
2 projects use a version of this
3.4k5mo agoReviewMountCreate a free account to mount
Sets up notification channels for CloudWatch alarms using SNS topics and subscriptions. Always use this skill when configuring alarm notifications — it creates encrypted SNS topics, configures topic policies for CloudWatch access, sets up email/SMS/webhook subscriptions, and links alarms to notification actions with proper security controls.
Steady49 mentions in 2 weeks
2 projects use a version of this
3.4k5mo agoReviewMountCreate a free account to mount
Sets up CloudWatch observability for the first time - Omni (CloudWatch Application Observability) and classic CloudWatch. Omni: creating a Space or Domain; access grants (who has access, at what level), access profiles bounding alerts, integrations, agents; instrumenting an app or AI agent with the plain ADOT SDK so traces reach Omni (Python/Node/Java/.NET on EC2/ECS/EKS/Lambda), incl. no-image-rebuild, CoreCLR vars; ingesting Azure or Google Cloud telemetry via the CloudWatch agent (VM/AKS, GCE/GKE); connecting Slack or the AWS DevOps Agent to a Space; whether GitHub or a custom MCP tool server (HTTP/stdio) can connect. CloudWatch: onboarding a service to Application Signals: ADOT auto-instrumentation, amazon-cloudwatch-observability add-on, monitored service, ServiceEvents, CI/CD metadata, Terraform. For using what is set up - queries, dashboards, alarms, Omni alerts, X-Ray, synthetics, Dynamic Instrumentation, AI agent evaluation, detecting Omni vs classic - use aws-observability.
Steady49 mentions in 2 weeks
1 project uses a version of this
3.4k5mo agoReviewMountCreate a free account to mount
Troubleshoots failing applications by discovering and analyzing CloudWatch log groups to identify error patterns, root causes, and actionable solutions. Use when an application is experiencing failures and log-based diagnosis is needed.
Steady49 mentions in 2 weeks
2 projects use a version of this
3.4k5mo agoReviewMountCreate a free account to mount
Answers questions about Amazon Application Recovery Controller (ARC) Region switch including architecture, plans, execution blocks, workflows, triggers, active/active vs active/passive, cross-account support, recovery time, dashboards, and customer positioning. Applicable when users ask about ARC Region switch adoption, design, or troubleshooting.
Steady49 mentions in 2 weeks
No other project uses it yet
3.4k5mo agoReviewMountCreate a free account to mount
Plans, builds, runs, and analyzes fault injection experiments with AWS Fault Injection Service (AWS FIS) to validate application resilience through chaos engineering. Covers experiment templates (actions, targets, stop conditions), the FIS actions catalog and action selection, the scenario library (AZ power interruption, cross-Region connectivity, EC2/EKS/EBS stress), experiment lifecycle and monitoring, logging and reports, multi-account experiments, the experiment IAM role, and blast-radius safety. Applies when a user mentions AWS FIS or fault injection, asks what experiment to run for a failure mode (AZ, Region, API errors/throttling, instance/pod/DB/cache failure, latency, packet loss), wants to author an experiment template or CLI/CloudFormation, or needs to safely run chaos experiments in pre-production or production. For the broader resilience program across Resilience Hub and ARC, see aws-resilience-lifecycle; for ARC routing controls and zonal shift, see recovery-controller-setup.
Steady49 mentions in 2 weeks
No other project uses it yet
3.4k5mo agoReviewMountCreate a free account to mount
Guides the end-to-end AWS resilience lifecycle integrating Resilience Hub v2, Fault Injection Service, and Application Recovery Controller. Covers the Define → Test → Operate workflow: from policy creation through failure mode assessment, to FIS experiment validation, to ARC operational controls. Applicable when the user wants a complete resilience strategy, needs to connect findings to experiments to controls, or is planning a resilience program. Also applicable for the meta question of whether marking NGRH findings as resolved is enough, whether they are "done" after resolving findings, or how to validate findings before resolving them. Not applicable for resolving or remediating a specific individual finding (see resilience-hub-failure-mode-assessment), or when a single service is explicitly named (e.g. "what FIS experiment should I run").
Steady49 mentions in 2 weeks
No other project uses it yet
3.4k5mo agoReviewMountCreate a free account to mount
Configures AWS Application Recovery Controller (ARC) for operational resilience: routing controls with safety rules for cross-Region failover, and zonal shift / zonal autoshift for AZ-impairment recovery. Applies when setting up failover routing, configuring safety rules, enabling zonal shift, or configuring zonal autoshift with practice runs. Also applies when shifting traffic out of a specific Availability Zone (AZ) for an ALB/NLB or other resource. For a broader "an AZ is impaired, what is my response across services" question, see aws-resilience-lifecycle. Does not apply to Resilience Hub setup or FIS experiments.
Steady49 mentions in 2 weeks
No other project uses it yet
3.4k5mo agoReviewMountCreate a free account to mount
Runs and interprets AWS Resilience Hub v2 failure mode assessments. Covers starting assessments, understanding findings (severity, categories, recommendations), triaging by achievability, working with AI-generated service functions, and resolving findings. Applies when the user wants to run an assessment, review findings, or understand failure modes, or has a specific finding and asks how to resolve, remediate, or fix it. Does not apply to initial setup (use resilience-hub-getting-started) or FIS experiments.
Steady49 mentions in 2 weeks
No other project uses it yet
3.4k5mo agoReviewMountCreate a free account to mount
Sets up AWS Resilience Hub v2 from scratch: creates resilience policies with SLO targets, registers systems and user journeys, onboards services with input sources, and runs a first failure mode assessment. Applies when the user wants to get started with Resilience Hub v2, create a policy, onboard a service, or run an assessment — including creating one concrete policy with specific availability/RTO/RPO targets and a DR approach for a single service (even a tier-1 one). Does not apply to FIS experiments or ARC routing controls.
Steady49 mentions in 2 weeks
No other project uses it yet
3.4k5mo agoReviewMountCreate a free account to mount
Configures AWS Resilience Hub v2 for multi-account resilience management across an AWS Organization. Covers the per-service cross-account permission model, cross-account IAM roles, and centralized assessment from a single account. Applies when the user wants to set up org-wide resilience or assess workloads that span multiple AWS accounts.
Steady49 mentions in 2 weeks
No other project uses it yet
3.4k5mo agoReviewMountCreate a free account to mount
Designs a resilience program: how to structure and standardize resilience policies across an organization, team, or portfolio (tiered policy model with availability/RTO/RPO targets and DR approach selection), and how often to run resilience activities (operational cadence). Applies when the user asks how to structure policies org-wide, what tiers/targets to set, which DR approach fits a tier, or how frequently to run assessments, FIS experiments, GameDays, or autoshift practice. Does not apply to creating or configuring a specific policy or resource for a single workload (use resilience-hub-getting-started), to step-by-step lifecycle execution (see aws-resilience-lifecycle), or to service-specific setup.
Steady49 mentions in 2 weeks
No other project uses it yet
3.4k5mo agoReviewMountCreate a free account to mount
Creates and manages secrets in AWS Secrets Manager following security best practices. Always use this skill when creating secrets — it sets up dedicated KMS encryption keys, automatic rotation, least-privilege IAM policies, CloudTrail auditing, and lifecycle management that are essential for production-grade secret handling.
Steady49 mentions in 2 weeks
1 project uses a version of this
3.4k5mo agoReviewMountCreate a free account to mount
A folder with a SKILL.md file: a name, a description of when to use it, and instructions. Claude loads a skill only when the task matches its description.
How do I use one I find here?
Copy the folder into your project's .claude/skills/ directory, or into your own skills folder to use it everywhere.
What do the warnings mean?
We read each file for commands that read secrets, delete things or pipe downloads into a shell, and say so before you copy it. No warning is not a promise that a file is safe.
Which skills worked for people?
Open a skill to see its discussion. Reports from people and their agents are coming.
AWSSkill