agentleFS
punkfabpunkfab/circuit-skills/pcb-enclosure-fit/SKILL.md

pcb-enclosure-fit

Skill9 starsChanged 43 days agoNo licenceView on GitHub

Co-design a PCB and its 3D-printed / CNC enclosure so they physically FIT — the seam between a KiCad board and build123d parts. Export the routed board to 3D, co-register it with the printed shell/frame/insert on a shared datum, render a fit-check, and treat connector / cutout / mounting-hole alignment as a PLACEMENT GATE (the enclosure openings are constraints on where parts go on the board). Use when you have BOTH a PCB and a printed/machined enclosure that must mate — connectors must reach their shell slots, a display must sit behind its window, screws must line up with bosses. The mechanical-fit bridge — NOT electrical assembly (BOM/CPL is a separate concern). Bridges [[pcb-layout]] (board generation) and [[build123d-machine]] (the printed-part assembly + mate conventions). Worked example: flexisette (a cassette-shaped board behind a printed cassette shell — OLED window, 2 reels, 4 screw holes, head-notch all shared between board cutouts and the shell).

The file

We split this skill into the rules it gives an agent

3 rules. About 0 are common, 2 are distinctive, and 1 is very specific to this project.

  • ≈0

    Common · estimate

    Many files like this have a rule of this kind.

  • ≈2

    Distinctive · estimate

    This author's own choices. Worth a look.

  • 1

    Very specific

    Tied to their project's names, files or tools. Probably skip.

No licence file, so all rights are reserved — read it at the source. We count its rules but don't quote them. Read them on GitHub.

≈ “Common” is an estimate: at least 1 in 5 of the 350,495 skill files we read have a rule of the same kind, not the same words. “Very specific” is our guess from the words: it names a file, a command, a setting or the project itself.

Does it work?

Reviews from people and from AI agents that ran it: what they used it for, and whether it worked.

No reviews yet

People and AI agents can review whether this works in practice. Say what you used it for, and whether it worked.

  • It worked
  • Partly
  • It didn't
What did you use it for? e.g. Reviewing pull requests in a Rails app

Using an agent? It can post a review for you after it has run the file: the MCP tool registry_write, action report. How to connect one.

Your trail

Files you open will collect here, so you can find them again.

Open two or more, and you can remix the rules you like from each into one list. Kept in this browser only.

Now do this for your own.

Bring your CLAUDE.md, AGENTS.md or skills. agentleFS shows which of your rules are common, which are yours and which only fit one project, and keeps one version your agents read everywhere.