dfm-review
Skill2 starsChanged 26 days agoMITView on GitHub
Use when an STL or part spec must be reviewed for FDM before slicing (orientation, plate face, overhangs, islands, bridges, material and assembly path). Runs the dfm-engineer in a fresh context and returns the review; the lead saves it beside the part.
1 other project uses a version of this.
Adopted by
Most recently taken up by
- BaratiLab/mechanical-engineering-skillstheir own version, first seen Nov 15, 2026
Other versions1 project uses a version of this.
Word for word · 0
None found.
Edited · 0
None found.
Wrote their own version · 1
- BaratiLab/mechanical-engineering-skills★ 16same name
How matches are found. Word for word: the exact same text. Edited: shares passages with this file (“99% same” means 99% of its five-word phrases also appear here; 10% or more counts). Their own version: similar meaning, or, weakest, the same name. We can’t tell which project had it first. Projects are counted among the 200 most-starred candidates, and mentions are links to the repository we found, up to 50 per site, so both counts are a floor.
In this repository30 other files it gives its agents.
- CLAUDE.mdCLAUDE.md
- agent-reviewSkill
- ai-mesh-cleanSkill
- cad-buildSkill
- couponSkill
- curriculumSkill
- fileSkill
- gddSkill
- ip-checkSkill
- led-budgetSkill
- lesson-learnedSkill
- makerworld-publishSkill
- material-pickSkill
- mcp-new-toolSkill
- ortho-sheetSkill
- pi-power-budgetSkill
- preprint-checkSkill
- promo-planSkill
- qa-gateSkill
- render-criticSkill
- research-oneSkill
- research-topicSkill
- retopoSkill
- safety-sheetSkill
- sculptSkill
- slicer-questionSkill
- style-bibleSkill
- tech-packSkill
- unit-costSkill
- verifySkill
The file
We split this skill into the rules it gives an agent
1 rule. About 0 are common, 0 are distinctive, and 1 is very specific to this project.
≈0
Common · estimate
Many files like this have a rule of this kind.
≈0
Distinctive · estimate
This author's own choices. Worth a look.
1
Very specific
Tied to their project's names, files or tools. Probably skip.
- Common
- Distinctive
- Very specific
- Very specific: line 12
Every part before /qa-gate or /preprint-check, and after any geometry change from cad-engineer or organic-modeler.
≈ “Common” is an estimate: at least 1 in 5 of the 372,429 skill files we read have a rule of the same kind, not the same words. “Very specific” is our guess from the words: it names a file, a command, a setting or the project itself.
Files
Overview
Input: $ARGUMENTS, an STL path, optionally mating-part paths. Output: the review in the reply (dfm-engineer has no Write tool), 50 lines or fewer.
When to use
Every part before /qa-gate or /preprint-check, and after any geometry change from cad-engineer or organic-modeler.
Steps
- Measure with
.venv\Scripts\python.exeplus trimesh/manifold3d: bounds, watertight, volume, bodies. - Overhang angle = angle between the face normal and -Z; a face is an overhang when it is below
support_threshold_angle(read the value for your process profile fromknowledge\02-bambu-studio\support-settings.mdor withtools\resolve_profile.py). Table per candidate orientation; islands per layer; longest bridge.tools\overhang_gate.pycan produce the per-z table. - Material pointer to
knowledge\03-materials\(for example the HDT/Vicat table and the PLA vs PETG note). One material per part unless multi-material is the point. Assembly: interference at nominal and translation sweeps against mating parts; state the verdict. Splits only at natural part boundaries, with keyed joints. - Report: orientation, plate face and finish, supports (target none) with numbers, material, assembly, checks not run.
Common rationalizations
| Rationalization | Reality |
| "Another session already checked assembly." | No check counts without its script and output on disk. |
| "Slope or angle, same thing." | The convention is easy to invert; use the definition in step 2. |
Red flags
- An orientation chosen without the overhang table.
- Writing into a folder listed in
protected_rootsinconfig\paths.yaml.
Verification
- Numbers for overhang area, islands, bridges per orientation.
- Assembly verdict stated with the sweep that proves it.
- Checks not run listed.
Does it work?
Reviews from people and from AI agents that ran it: what they used it for, and whether it worked.
No reviews yet
People and AI agents can review whether this works in practice. Say what you used it for, and whether it worked.
- It worked
- Partly
- It didn't
Using an agent? It can post a review for you after it has run the file: the MCP tool registry_write, action report. How to connect one.
Your trail
Files you open will collect here, so you can find them again.
Open two or more, and you can remix the rules you like from each into one list. Kept in this browser only.
Now do this for your own.
Bring your CLAUDE.md, AGENTS.md or skills. agentleFS shows which of your rules are common, which are yours and which only fit one project, and keeps one version your agents read everywhere.

