code-idea

Turns a plan into the actual files a coding agent needs to work correctly — not a lecture on best practices, the files themselves.

When this runs

• Right after a planning/design conversation, before the user moves to Claude Code (or another agent) to start building
• When the user pastes or describes a new idea and wants it scaffolded from scratch
• When updating or extending an existing project's agent docs as the plan evolves

Core philosophy — bake this into every output

• The root context file stays SHORT — start near 30 lines, treat ~150 as a hard ceiling, move anything longer into a linked doc. Which file that is depends on the target agent (Step 3); how short it should be does not.
• Nothing is settled until the user says so. A fact that entered the conversation because you proposed it, or because it showed up in a prototype/demo, is not confirmed — see Step 1's source tagging and Step 2's confirmation rule.
• "Not yet decided" is a valid answer and a real output. A deferred choice becomes a dated pending-decision rule at the top of the context file plus a Status: Pending entry in decisions.md — never a guess written as settled, and never a hollow doc.
• Only write rules that fix an actual observed or clearly anticipated mistake. No vague advice, no restating what a linter/formatter already enforces, no pasted-in documentation, no large code samples.
• Put the rules most likely to be violated at the TOP of the file — agents can lose instructions buried later in a long file.
• Separate the living spec from the historical log: product.md is current-state and gets edited as things change; decisions.md is append-only — past entries are never rewritten, each one dated with its rationale.
• A doc that goes stale actively misleads more than no doc at all. architecture.md must be updated in the same change as any real architecture shift, or removed if it can't be kept current.
• Recurring step-by-step procedures (how to test X, how to rotate Y) belong in a Skill, not a static markdown doc — skills load conditionally instead of sitting in every session's context.
• The container is per-agent; the content is not. Which files exist and how they load comes from the target agent's own docs — Claude Code reads CLAUDE.md and does not read AGENTS.md at all; Codex and Antigravity read AGENTS.md natively. What the docs say — system design, naming conventions, UI direction, business rules — is identical either way. See references/agent-profiles.md for per-agent specifics, and never assert an agent behavior that file can't cite.
• See references/best-practices.md for the fuller reasoning behind these rules if the user asks why, or if a judgment call comes up mid-scaffold. See references/recommendation-heuristics.md for grounded defaults on tech stack and database/caching choices to offer during Step 2. See references/agent-profiles.md for what each target agent reads and how — verify a row against its source before relying on it.

Workflow

Step 0 — Check for an existing scaffold

• Look for a root AGENTS.md, CLAUDE.md, or GEMINI.md, or a docs/ file matching one of this skill's own generated names (decisions.md, product.md, development-roadmap.md, roadmap.md from before 3.0, architecture.md, conventions.md, design-system.md from before 5.0) at the target path. If any exist, this is a re-run, not a fresh scaffold — say so, name what you found, and state that its contents will be re-confirmed rather than assumed. A legacy design-system.md is left alone here — migrating it into DESIGN.md is design-ui's job, so name it in the Step 5 hand-off.
• If a previous run left pending decisions, surface those first: "last time you parked [X] — decide now, or keep it parked?"
• Never infer the target agent from which files exist. The layout is a product of a previous answer; treating it as evidence makes that answer self-confirming forever.

Step 1 — Gather the plan

• If this conversation already contains a planning/design discussion, extract it directly (architecture, product rules, decisions already made, open questions, tech stack). Don't make the user repeat what they already said.
• Tag every extracted fact by source: (a) explicitly stated or confirmed by the user; (b) proposed by the assistant or produced by a prototype/demo and never separately confirmed; (c) read from an existing generated doc on disk. Only (a) counts as known and lets you skip a question in Step 2. Both (b) and (c) are still open questions no matter how settled they look — a doc on disk proves a file was written, not that anyone decided anything, and it may predate the confirmation rules entirely.
• When re-asking a (c) fact, offer the doc's current value as the recommendation so confirming is one keystroke: "decisions.md currently says Postgres — keep it, change it, or park it?"
• Never silently overwrite content the user clearly hand-wrote. Ask about it.
• Never carry a secret out of the plan. Credentials, tokens, connection strings, private hostnames and IPs, and real customer data are not extracted into any generated file, even when the plan contains them. Substitute a named reference (DATABASE_URL, <internal-host>); if the value's shape matters, describe the shape in docs/product.md instead of reproducing the value. This one has no override — these files get committed. If the user asks for the value to be included anyway, decline and offer the named-reference form instead — the file being committed means this isn't the user's call.
• If starting fresh, ask the user to paste or describe the plan/idea. A rough idea is enough to start the interview in Step 2 — don't insist on a fully fleshed-out plan first.

Step 2 — Interview (this is what makes it dynamic, not templated)

Ask only what isn't already known from the plan or conversation. Typical questions — adapt freely, don't ask ones you already have answers to:

• Single app, or multiple subsystems / a monorepo — and if multiple, what does each do and what stack does it use? (This alone determines whether nested per-subsystem files are needed — most small projects don't need them.)
• Which coding agent(s)? Claude Code, Codex, Antigravity, or generic/unsure. This decides the file layout only, never the content — see Step 3. Always ask; never infer it from which files already exist.
• Is there a frontend/UI? If so, ask its framework and component approach here — that's stack. How it looks is not this skill's question: design-ui settles it after this run, against mockups. Only ask whether to design it next or park it — and, for a product with a public face, whether a brand exists to import, should be made, or is parked. The brand itself is design-brand's question.
• Any naming or structural conventions beyond what a linter enforces — table/column naming, API route shapes, module boundaries? (These become docs/conventions.md; skip the file when the answer is "just the tooling defaults.")
• Any business rules, pricing logic, or security/compliance constraints an agent must never quietly change? (These become the highest-priority root-file rules AND get a decisions.md entry.)
• Writing into an existing repo, or drafting for one that doesn't exist yet?
• Any procedures likely to recur (testing steps, deployment, local setup) that should become a Skill instead of a doc?
• How does this break into modules and sub-modules, and in what order? Propose a specific decomposition with its dependency chain ("Module 1 Infrastructure — 1.1 auth, 1.2 audit logging — then Module 2 Orders, since orders needs a user"), not an open-ended ask. This becomes docs/development-roadmap.md.

Don't leave these as open questions the user has to answer from scratch. For anything with a genuine best-practice default — tech stack, database/caching choice, monorepo vs. single-repo, UI framework — propose a specific, context-grounded recommendation as part of the question, and let the user accept it or override it. This matters most for a user without strong opinions on the topic; don't make them invent an answer to a question they came here to avoid having to research themselves.

• Bad: "What database do you want to use?"
• Good: "For [the order/credit/job data described], I'd recommend Postgres (relational, transactional, handles the credits ledger cleanly) with Redis for the live print-queue/session state. Go with that, or do you have something else in mind?"

Silence is not confirmation. Anything tagged (b) in Step 1 — an assistant proposal, or a choice baked into a prototype/demo — goes through the same recommend-and-confirm pattern before it's written into any doc as settled, even if the user never objected to it at the time. Be explicit about where it came from, especially when the choice was forced by the demo environment rather than chosen on the merits.

One decision at a time. Never bundle several recommendations into one message and read a single "sounds good" as confirming all of them — a blanket yes against a bundle confirms nothing. Ask, confirm, then move to the next.

• Bad: silently carrying the prototype's UI stack into decisions.md because it's "already decided."
• Good: "The working prototype used [library], but that was partly forced by what the chat artifact sandbox allows — it wasn't a production call. For the real build I'd recommend [grounded recommendation]. Keep the prototype's choice, go with this, or something else?" The prototype's look is a separate question — design-ui imports it as the visual target, so never let the stack answer settle the look or the reverse.

"Decide later" is a third valid answer. Every recommendation offers three exits — accept, override, or defer — and defer is a legitimate choice, not a failure to answer. Offer it proactively for anything that doesn't block the first slice of work (theme, palette, copy voice): "Go with that, something else, or park it and decide once the scaffold's up?"

A deferred choice produces three things and no guesses: a dated item in the context file's ## Pending decisions section, a Status: Pending entry in decisions.md, and no doc for the thing that's undecided — a doc that's mostly a hole is worse than its absence.

Ground every recommendation in the actual project context (data shape, expected scale, real-time needs, domain) rather than reaching for a generic default — see references/recommendation-heuristics.md for starting points on stack/database/caching choices, and lean on a web-search tool if one is available to confirm a recommendation is still current before offering it, since specific tools and best practices shift over time. If the user has already stated a preference or constraint earlier in the conversation, don't re-litigate it — just confirm and move on.

Prefer short, specific questions. Use an elicitation/multiple-choice tool where the surface supports it and the question fits that shape (a recommendation plus 2–3 alternatives works well there); don't force an open-ended essay prompt when a recommend-and-confirm question would do.

Step 3 — Decide the structure (per-project, not fixed)

Based on the interview, choose which files are actually warranted. Don't generate a file nobody needs — a trivial single-file project needs one root file, docs/development-roadmap.md, and often nothing else.

First pick the layout from the target agent(s) — this decides which files exist, never what they say:

One named agent gets its native layout; plural or generic gets the portable one. Size limits aren't comparable across agents (lines vs. bytes vs. characters) — report each in its own unit; the skill's own ~150-line root-file ceiling still applies to the root file independently of any agent's cap. Keep critical rules in the root file even in Claude-native mode — nested files and path-scoped rules don't survive /compact. See references/agent-profiles.md.

Then pick the linked docs, which are identical in every layout. Don't generate a file nobody needs — with one deliberate exception, development-roadmap.md, which is always generated because downstream module planning reads it as its input contract (see references/best-practices.md):

Step 4 — Draft the content

• Pull the skeleton for each file type from references/templates.md, then fill it with the project's actual specifics — never leave placeholder text in the delivered output. The one exception is a dated pending-decision entry, which asserts a real current fact and is required when the user defers.
• Never write a credential, token, connection string, private hostname/IP, or real customer data into a generated file, even if it's in the plan and even if asked to. Use a named reference (DATABASE_URL, <internal-host>) and describe the value's shape in docs/product.md if an implementer needs it. These files get committed.
• Keep decisions.md entries terse: date, the decision, a one-line rationale, alternatives considered if relevant. Don't editorialize beyond that.
• Keep the content file (AGENTS.md or CLAUDE.md, per Step 3's layout) to bullet-point imperatives, not prose paragraphs.
• Use the project's own terminology (product names, domain vocabulary, language/locale) rather than generic placeholders.

Step 5 — Write and confirm

• If there's filesystem access to the actual project (e.g. running inside Claude Code with a real repo), write the files directly into the correct paths.
• If running in a chat-only surface without a project filesystem, produce the files as downloadable/presentable content and tell the user exactly which path each one belongs at once they're in their project.
• If Step 0 found an existing scaffold and the target agent changed, migrate rather than orphan: moving content between CLAUDE.md and AGENTS.md, adding or removing the loader. Propose the moves and get confirmation before writing — migration deletes files. A pre-3.0 docs/roadmap.md migrates the same way: propose the rename to docs/development-roadmap.md and the conversion of its flat lists into module/sub-module blocks, show what maps where, and confirm before writing. Never drop content that has no home in the new layout; raise it as a question instead. On any re-run, a sub-module whose **Tasks:** already points at a docs/guides/feature_*_plan.md file keeps that pointer — plan-module wrote it, and resetting it to not yet planned orphans a live plan.
• Show the resulting file tree and a short summary of what went where, naming which layout was used and why. List every companion CLAUDE.md explicitly with a one-line note that it's a thin @AGENTS.md import. List Pending decisions as its own section when any exist, so the user leaves knowing what they parked. Flag anything inferred vs. still uncertain — don't silently guess on business-critical rules.
• Tell the user how to verify the docs actually load: for Claude Code, run /context and check the list under Memory files. In portable mode (an AGENTS.md exists alongside CLAUDE.md), warn against running /import, which appends a duplicate copy of AGENTS.md into CLAUDE.md.
• Before reporting, check every internal link in the content file resolves to a file that was actually generated. Drop the line rather than shipping a dead link — on a fresh run DESIGN.md doesn't exist yet, because design-ui writes it later and adds its own link, so this fires on a common path, not an edge case. On a re-run, keep the DESIGN.md line design-ui added and the docs/brand/README.md line design-brand added: like a **Tasks:** pointer, each is another skill's field.
• Report size against each selected agent's own limit, in its own unit — line count for Claude Code, bytes for Codex, characters for Antigravity (see references/agent-profiles.md) — warning at roughly three-quarters of any limit. For Codex, report the combined root-plus-nested size against the 32 KiB cap, not just the root: it stops adding files once the combined total hits the cap, silently dropping the deepest nested guidance first.
• Hand off. A project with a UI goes to design-ui next — before plan-module, so the first screen is planned against a reference rather than a guess. When Step 2 found a brand to import or make and docs/brand/ doesn't exist yet, design-brand goes first, and design-ui maps its result. If a prototype exists, record the look as a Status: Pending entry in decisions.md naming where the prototype lives and what the user said about it — design-ui may run in a later session that never saw this conversation, and that entry is the only trail it has. Without a UI, or with its look parked, offer plan-module. Also offer anything else Step 2 surfaced — a Skill for a recurring procedure, the next subsystem.

Reference files

• references/best-practices.md — the research and reasoning behind the size limits, ordering rules, and doc-vs-skill split. Read this if the user asks "why," or a structural judgment call comes up that isn't covered above.
• references/templates.md — skeleton structure for each file type (AGENTS.md, CLAUDE.md, rules directories, decisions.md, development-roadmap.md, product.md, architecture.md, conventions.md). Read this in Step 4 before drafting.
• references/agent-profiles.md — what each target agent reads and how, with sources and verified-on dates. Read this before Step 3, and before asserting any agent behavior anywhere.
• references/recommendation-heuristics.md — grounded defaults for stack, database/caching, and naming choices. Read this in Step 2 before recommending one.