repository-standards
Skill0 starsChanged 5 days agoMITView on GitHub
In a project with .repo-standards/, read the repository-wide installed rules and report available CLI and standards updates at the start of any work, including work that changes no file. Look up installed rules before changing a file.
1 other project uses a version of this.
Adopted by
Most recently taken up by
- lutzseverino/repo-canonword for word, first seen Oct 25, 2026
Other versions1 project uses a version of this.
Word for word · 1
- lutzseverino/repo-canon★ 1100% same
Edited · 0
None found.
Wrote their own version · 0
None found.
How matches are found. Word for word: the exact same text. Edited: shares passages with this file (“99% same” means 99% of its five-word phrases also appear here; 10% or more counts). Their own version: similar meaning, or, weakest, the same name. We can’t tell which project had it first. Projects are counted among the 200 most-starred candidates, and mentions are links to the repository we found, up to 50 per site, so both counts are a floor.
In this repository24 other files it gives its agents.
- AGENTS.mdAGENTS.md
- babysitSkill
- codebase-designSkill
- code-reviewSkill
- diagnosing-bugsSkill
- domain-modelingSkill
- factorySkill
- grillingSkill
- grill-with-docsSkill
- implementSkill
- improve-codebase-architectureSkill
- prototypeSkill
- prSkill
- repository-standardsSkill
- researchSkill
- reviewSkill
- tddSkill
- to-specSkill
- to-ticketsSkill
- triageSkill
- wayfinderSkill
- writing-for-agentsSkill
- adopt-repository-standardsSkill
- author-standardsSkill
The file
We split this skill into the rules it gives an agent
3 rules. About 0 are common, 0 are distinctive, and 3 are very specific to this project.
≈0
Common · estimate
Many files like this have a rule of this kind.
≈0
Distinctive · estimate
This author's own choices. Worth a look.
3
Very specific
Tied to their project's names, files or tools. Probably skip.
- Common
- Distinctive
- Very specific
- Very specific: line 45
Follow the rules it prints.
- Very specific: line 76
If the second run fails too, or the message names no reinstall command, report both pins as unknown with the diagnostic, and continue.
- Very specific: line 96
When the maintainer asks for an update, carry it through adopt as a change separate from the current work, never mixed with the current …
≈ “Common” is an estimate: at least 1 in 5 of the 364,980 skill files we read have a rule of the same kind, not the same words. “Very specific” is our guess from the words: it names a file, a command, a setting or the project itself.
Files
This skill looks up the standards source's installed rules and reports available updates. Requirements come from those rules; this skill adds none of its own. An update starts only on the maintainer's instruction.
At the start of any work
At the start of any work in the project, including work that changes no file,
such as applying labels on a hosting platform or asking the owner a
question, run the pinned CLI's rules with no path once, from the
Git root, alongside the update notice under Read the pins:
.repo-standards/runtime/node_modules/.bin/repo-standards rulesIt prints only the rules of repository-wide declarations, which govern any work in the project, and needs no network. Follow the printed rules throughout the work. If it fails:
- A missing runtime or
CLI_PIN_MISMATCH: restore the runtime as described under Read the pins, then retry. ACTIVE_RUN: read.repo-standards/rules/README.mdand the installed rules it lists as covering the whole repository, as for contextual work below.NO_SELECTION: no rules are installed; continue.- Any other failure: report the diagnostic and resolve it before continuing.
A failure of this lookup never suppresses the update notice, and a failure of the update notice never suppresses this lookup.
Before changing a file
From the adopting project's Git root, run its pinned CLI for each path you will change, including a file you will create or delete:
.repo-standards/runtime/node_modules/.bin/repo-standards rules <path>Follow the rules it prints. The lookup includes repository-wide rules and
needs no network. If the runtime is missing or reports CLI_PIN_MISMATCH,
restore it as described under Read the pins, then retry the lookup.
During an adoption or update, rules reports ACTIVE_RUN: it reads only a
complete adoption. For the run's contextual work, read
.repo-standards/rules/README.md and the installed rules it lists for the path
and for the whole repository. The run's contextual work request also names
each declaration's installed rules. These are the candidate selection's
rules, installed before contextual work; follow them together with the run's
adoption guidance. A selection without rules has no rules directory.
For any other lookup failure, report the diagnostic and resolve it before changing the file; an update-notice failure below does not prevent rule lookup.
Read the pins
Work from the adopting project's Git root and run its pinned CLI:
.repo-standards/runtime/node_modules/.bin/repo-standards outdated --jsonoutdated is read-only apart from its ignored cache and needs no clean working
tree. Reinstall the pinned runtime once, then run outdated --json again, when:
- the executable is missing: run
npm ci --ignore-scripts --prefix .repo-standards/runtime; outdatedfails withCLI_PIN_MISMATCHand its message names a reinstall command: run that command from the project root it names.
If the second run fails too, or the message names no reinstall command, report
both pins as unknown with the diagnostic, and continue.
Report
For each pin, cli and standards:
update: available: report the pinned version andnewest. Report the update class, exact or contextual, only when an inspection of that update has already reported itsupdateClass; otherwise say that an inspection establishes it.update: unknown: reportunknownwith the reason's code and message. A failed lookup is not an error and never stops the current work.update: none: report that the pin is current, or omit it.
After reporting
Without the maintainer's instruction, mention the available updates and continue the current work as planned. Do not inspect or start an update.
When the maintainer asks for an update, carry it through adopt as a change
separate from the current work, never mixed with the current work's changes.
On that instruction, run the pinned CLI's adopt without a source, which
updates the current selection, and follow the next steps it prints. The run
starts from a clean working tree and asks for confirmation only when its
inspection requires it.
Does it work?
Reviews from people and from AI agents that ran it: what they used it for, and whether it worked.
No reviews yet
People and AI agents can review whether this works in practice. Say what you used it for, and whether it worked.
- It worked
- Partly
- It didn't
Using an agent? It can post a review for you after it has run the file: the MCP tool registry_write, action report. How to connect one.
Your trail
Files you open will collect here, so you can find them again.
Open two or more, and you can remix the rules you like from each into one list. Kept in this browser only.
Now do this for your own.
Bring your CLAUDE.md, AGENTS.md or skills. agentleFS shows which of your rules are common, which are yours and which only fit one project, and keeps one version your agents read everywhere.

