Record a demo

A demo shows a person what changed in under a minute. Dead air comes from you thinking between commands, so never record while exploring. Explore first, write a screenplay of beats, then let the bundled player run it with no model in the loop.

Needs agent-browser (0.38.1 or later), ffmpeg and Node 22 or later, on macOS, Linux or Windows. The scripts need no packages. The player drives agent-browser even when the project has its own browser driver: it needs Chrome's 3x screencast, the pointer's timing and the stepped scroll, which a test runner does not give. The player is scripts/record.mjs in this skill's folder. The narration comes from the add-voiceover skill, in the folder next to this one (<skill-dir>/../add-voiceover); without it, record a silent video. Install it with npx skills add jamdotdev/skills --skill add-voiceover.

1. Rehearse without recording

Open the page, run agent-browser snapshot -i, and run every action once. Pick CSS selectors that still match after earlier steps change the page; refs like @e3 go stale.

If the app needs sign-in or seed data, set that up now, in the session the player uses, launched the way it launches it: agent-browser --session demo --args "--force-device-scale-factor=3" open <url>. The flag renders the page at 3x for a sharp take; a session started without it keeps its 1x screen. The player closes the session after each take, so for a sign-in that lasts across takes, put AGENT_BROWSER_PROFILE=./demo-profile (a folder of your own) in front of this command and of every record.mjs run. Don't export it: polish.mjs would then open its Chrome in that profile.

2. Write the screenplay, beats.json

At most six beats. A beat shows one thing: a shot for the camera, and in do the commands that show it, with the lines that say it as ["say", "..."] actions. The voice leads, like a person recording: a line starts once the one before has finished, and the commands after it run while it plays, so a click lands on the words about it. A full example is beats.example.json in this skill's folder.

[
  {"shot": "wide",
   "do": [["say", "This is TodoMVC. Let's add the first thing to do."],
          ["click", ".new-todo", "--human"], ["humantype", ".new-todo", "Buy oat milk"], ["press", "Enter"]]},
  {"shot": ".todoapp",
   "do": [["say", "Every item lands in the list the moment you press Enter."],
          ["humantype", ".new-todo", "Book flights to Lisbon"], ["press", "Enter"]]},
  {"do": [["say", "Done with one? Tick its checkbox."],
          ["click", ".todo-list li:nth-child(1) .toggle", "--human"]]}
]

Direct the camera before you write a command. A camera move is a cut the viewer has to follow, so each one needs a reason:

1. Open wide, so the viewer knows where they are.
2. Frame a region ("shot": "<selector>") only to make readable what the line is about: the list that grows, the message that appears, the number that changed. The frame holds for the whole beat and must contain every control the beat clicks.
3. At most one move per beat. It starts with the beat's first line, so the voice and the camera arrive together. A beat without shot keeps the last one, and the camera stays still.
4. Stay framed across beats in the same area. Never zoom out and back in between them.
5. Go wide when the page changes under the viewer, and for the last beat.

The camera never follows clicks on its own. A frame that would zoom in less than 1.25x stays wide, and polish.mjs warns about a click outside its beat's frame.

• Write the lines with the rules in add-voiceover: short, spoken, one idea each, naming what the viewer should notice, not what the mouse does. Put a line just before the command it describes.
• do entries are agent-browser commands. humantype <selector> <text> types one key at a time; plain type and fill put the whole text in one frame.
• Use click <sel> --human so the pointer travels there like a hand and the press shows. A plain click happens with no pointer on screen.
• ["scrollto", "<sel>"] scrolls smoothly until the element sits a fifth of the way down the screen, in the window or in whatever panel scrolls it. End a beat with it, and frame what it reveals in the next beat: a framed beat keeps its region as it was before the scroll, and the player warns when a framed beat does more than wait or talk after scrolling. Plain scroll jumps in one frame. Selectors are CSS, or XPath after xpath= to match by text: xpath=//button[contains(., 'Save')].
• Add ["wait", "900"] after a change the viewer needs a moment to read. Nothing should sit still and silent for more than 3 s; record.mjs warns when something does, so cut the wait or give it a line. The last beat's result holds 2 s on its own.
• Mark the beat that tells the whole story in one still with "poster": true, usually the payoff. Its last frame, after the result has landed and the pointer has stepped aside, becomes poster.png. Without a mark the last beat is used.
• ["cut", <agent-browser command>] runs the command and cuts its time from the video, for a wait nobody needs to watch: ["cut", "wait", "--text", "Welcome"] skips a loading screen. After click <sel> --human, the press shows and the cut follows straight away. ["cut", "open", "<url>"] moves to another page, after the line playing has finished.
• A humantype text that starts with $ is a shell command run at that moment. Its last output line is typed and the wait for it is cut, for a value only known mid-take, like an emailed sign-in code: ["humantype", "#code", "$ python3 fetch_code.py"]. Never put the value itself in beats.json. A screenplay runs commands, so play only one you wrote or read; the player prints each command before it runs it.

3. Record

Voice the lines first, so each beat waits for its real narration, then record, then lay the voice under the video:

node <add-voiceover-dir>/scripts/voiceover.mjs beats.json ./voice
node <skill-dir>/scripts/record.mjs beats.json <url> ./demo-out --voice voice/lines.json
node <skill-dir>/scripts/polish.mjs demo-out
node <add-voiceover-dir>/scripts/voiceover.mjs demo-out/narration.json ./voice --video demo-out/polished.mp4

polish.mjs writes polished.mp4 and poster.png. It gives the raw take the finish of a screen-recording editor: the camera runs the screenplay's shots over the whole composed shot, window and wallpaper included, easing between them in 0.7 to 1 s (a deeper zoom takes longer), and draws the pointer crisp at any zoom, blurred along its path while it moves, with a small squash and a fading ring on each press. The page sits as a rounded card with a shadow on the wallpaper in assets/wallpaper.png (--background <image> picks another; --background none fills the frame with the page edge to edge, for docs or side-by-side comparisons). --frame safari or --frame chrome puts the page in that browser's window, its address bar (and Chrome's tab title) following the page as it changes; use it when where you are in the app is part of the story. It renders at 2560x1440 and 60 fps, so text stays sharp even zoomed in. It lays out each frame in a headless Chrome (agent-browser session polish), about six seconds per second of video, so run it in the background or with a timeout of several minutes; a run cut short leaves nothing behind. It keeps the take's frames as JPEGs in polish-frames/ while it runs, up to a gigabyte for a minute, removed when it finishes. Timing does not change, so the narration still lines up. The last command reuses the lines the first one voiced and writes voice/voiced.mp4. Pick the voice as add-voiceover says before the first command, and keep it for both voice commands: the first command voices the final cut, and a different voice changes each line's length, which moves the clicks off their words. To rehearse cheaply, run them all with Kokoro, then again with the real voice. For a silent video, skip both voice commands and drop --voice; lines are then timed at reading pace and the voice can be added later.

The page loads before recording starts, the viewport is 1280x720, and the player takes the frames straight from Chrome's screencast at 3x (agent-browser's own recorder captures at 1x), so the take is a true 3840x2160. The page moves at an even 30 fps, except a scrollto, which is filmed a step at a time at a true 60 fps however busy the machine is; the camera and pointer move at 60. The take has no pointer; polish.mjs draws it, so always run it. The pointer moves like a hand: each path bends its own way and eases in and out in one movement to a point inside the target, right of centre and a little low, where it presses off the label so the viewer can still read what was clicked; and once the beat is done with it, it drifts sideways off the content. It takes the shape the page asks for: a pointing hand over links and anything styled cursor: pointer, an I-beam over text fields, the arrow elsewhere, morphing as it crosses the target's edge. A field that already has focus is typed into without another click. The player writes video.mp4, narration.json with the second each line started, and timeline.json with each beat's shot and framed region, and the pointer's moves and presses.

If a command fails, the player stops and prints the agent-browser output. Fix the selector in beats.json and run it again.

4. Check before you share

Read what polish.mjs printed: the number of camera moves should match the shot changes you wrote, with no out-of-frame warning. Then extract one frame per beat, a second and a half after its said in timeline.json, and look at each:

ffmpeg -v error -ss <said + 1.5> -i voice/voiced.mp4 -frames:v 1 beat.png

Look at poster.png too: covered from the narration, it should still say what changed. If it doesn't, move "poster": true to another beat in demo-out/timeline.json (polish reads that file, not beats.json) and run polish.mjs again.

Then get a fresh look. If you can start a subagent, give it only the beat frames, poster.png and a one-line brief of what the demo shows, never your plan or your reasons. Ask it for a ranked list: wrong state or missing result first, then framing (the frame cuts off what the line names, the pointer covers it), then pace (a pause too long, a click too fast to follow), then polish. Each finding names the frame file that shows it and the fix in one line, or it says "nothing" and lists the frames it looked at. Without a subagent, do the same pass yourself, a frame at a time.

Re-record when a frame shows the wrong state, or when a shot needs another selector: the player measures each shot while it records. Run polish.mjs again when only its options change, like --frame or --background. Never edit the video to hide a failed step. Then run the checks in add-voiceover.

Share

Attach the MP4 to the pull request (GitHub takes videos up to 10 MB on free plans) or the ticket. Where a video won't play inline, as in a Slack preview or a README, use poster.png as the still that links to it.

With Jam: when command -v jam (where jam on Windows) finds the CLI, ask the user once whether to upload the video; it becomes one link to comment on, with a synced transcript of the narration and frames the next agent can read. Upload only on a yes, with jam create jam '{"kind": "video", "url": "<url>", "videoPath": "voice/voiced.mp4", "posterImagePath": "demo-out/poster.png", "screenDimensions": {"width": 2560, "height": 1440}}'. Exit code 3 means signed out: run jam auth login, then retry.