vocal-chain
Skill32 starsChanged 55 days agoMITView on GitHub
Use when the user has recorded vocals and wants a processing chain set up. Examples - "set up my vocal chain", "process this vocal", "make the vocal sit in the mix", "give me a pop vocal chain", "make this rap vocal aggressive".
In this repository12 other files it gives its agents.
- CLAUDE.mdCLAUDE.md
- arrangement-coachSkill
- chord-proSkill
- groove-builderSkill
- mastering-prepSkill
- midi-cleanupSkill
- mixer-doctorSkill
- producer-modeSkill
- reference-matchSkill
- sidechain-setupSkill
- sound-designerSkill
- tempo-coachSkill
The file
We split this skill into the rules it gives an agent
8 rules. About 0 are common, 8 are distinctive, and 0 are very specific to this project.
≈0
Common · estimate
Many files like this have a rule of this kind.
≈8
Distinctive · estimate
This author's own choices. Worth a look.
0
Very specific
Tied to their project's names, files or tools. Probably skip.
- Common
- Distinctive
- Very specific
- Distinctive: line 14
Ask if not given:
- Distinctive: line 32
If peaks are red or the recording is below -20 dB, flag it: "Re-record at proper gain first.
- Distinctive: line 92
After applying, the user listens.
- Distinctive: line 101
Don't auto-tune without asking — many vocals are intentionally raw.
- Distinctive: line 102
Don't apply 8+ dB of compression in one stage.
- Distinctive: line 103
Don't put reverb in-line — always on a send.
- Distinctive: line 104
Don't load expensive third-party plugins by default.
- Distinctive: line 105
Don't pitch-correct outside the song's key without confirming the key first.
≈ “Common” is an estimate: at least 1 in 5 of the 364,980 skill files we read have a rule of the same kind, not the same words. “Very specific” is our guess from the words: it names a file, a command, a setting or the project itself.
Files
Vocal Chain
Set up a vocal processing chain on the vocal track. Stock Ableton plugins by default; user can swap to third-party manually.
Workflow
1. Identify the vocal style
Ask if not given:
| Style | Sonic goals |
| Pop lead | Bright, present, controlled, clean |
| Rap (modern) | Aggressive, in-your-face, heavy compression |
| Indie/lo-fi | Warm, slightly distant, character preserved |
| R&B | Smooth, lush, with subtle pitch correction |
| Cinematic/spoken word | Intimate, breathy, minimal processing |
| Backing vocals | Sit behind the lead — duller, narrower, ducked |
2. Inspect the recording
get_track_info for the vocal track. Check:
- Peak level (should be -6 to -3 dB ideally)
- Any existing devices (don't blow them away)
- Mono or stereo (vocals are usually mono)
If peaks are red or the recording is below -20 dB, flag it: "Re-record at proper gain first; processing won't fix a bad recording."
3. Build the chain
Order matters. Standard order:
- Gate / Noise reduction (only if needed)
- Subtractive EQ (cut problems)
- De-esser (tame harsh sibilance)
- Compressor 1 (peak control, fast)
- Compressor 2 (leveling, slow)
- Additive EQ (boost desired frequencies)
- Saturation (optional, for character)
- Pitch correction (Auto-Tune / Melodyne / Vocal Pitch — if needed)
- Reverb send (to a return, not in-line)
- Delay send (to a return, not in-line)
Pop lead chain (stock Ableton)
| Slot | Plugin | Settings |
| 1 | EQ Eight | HPF 80 Hz, cut -3 dB at 250 Hz, cut -2 dB at 4k (problem range) |
| 2 | Multiband Dynamics | De-ess range 5-9 kHz, threshold -25 dB, ratio 4:1 |
| 3 | Compressor | Ratio 4:1, attack 5 ms, release 60 ms, threshold for 4-6 dB GR on peaks |
| 4 | Glue Compressor | Ratio 2:1, slow attack, auto release, 1-2 dB GR (leveling) |
| 5 | EQ Eight | +2 dB at 100 Hz (warmth), +2 dB at 5 kHz (presence), +2 dB at 12 kHz (air) |
| 6 | Saturator (optional) | Drive 2-3 dB, Soft Clip mode |
| Send A | Hall reverb | 15-20% wet, pre-delay 30-50 ms |
| Send B | Ping Pong delay | 1/8 dotted, 15-20% wet, feedback 25% |
Rap (modern, aggressive) chain
| Slot | Plugin | Settings |
| 1 | EQ Eight | HPF 100 Hz, surgical cuts on resonances |
| 2 | Multiband Dynamics | De-ess 5-9 kHz, ratio 6:1 (aggressive) |
| 3 | Compressor | Ratio 6:1, attack 3 ms, release 40 ms, GR 6-8 dB |
| 4 | Compressor 2 | Ratio 3:1, attack 30 ms, release auto, GR 2-3 dB |
| 5 | EQ Eight | +3 dB at 5 kHz (aggression), +2 dB at 200 Hz (chest) |
| 6 | Saturator | Drive 4-6 dB, Soft Sine mode (mild distortion) |
| Send A | Plate reverb (Ableton Reverb in Plate algorithm) | 8-12% wet, short pre-delay |
| Send B | Slap delay | 1/16 single repeat, 10% wet |
Indie / lo-fi chain
| Slot | Plugin | Settings |
| 1 | EQ Eight | HPF 70 Hz, gentle |
| 2 | Compressor | Ratio 3:1, slow attack 30 ms, release 80 ms, GR 3-4 dB |
| 3 | Saturator | Drive 3-5 dB, Tape mode (warmth) |
| 4 | EQ Eight | -1 dB at 8 kHz (slightly dull), gentle |
| 5 | Vinyl Distortion or Cabinet | Subtle, for lo-fi character |
| Send A | Vintage spring reverb | 25-30% wet (more present) |
4. Apply with confirmation
Show the proposed chain. Confirm before writing. Apply each device in order.
5. Listen and tune
After applying, the user listens. Adjust based on feedback:
- Too dark? → Add 1-2 dB at 10-12 kHz
- Too bright/harsh? → Reduce de-ess threshold, or cut at 4-5 kHz
- Pumping too obvious? → Reduce compressor ratio or threshold
- Sibilance still strong? → De-ess threshold lower or range tighter
Don'ts
- Don't auto-tune without asking — many vocals are intentionally raw.
- Don't apply 8+ dB of compression in one stage; use two stages instead (peak compress + leveling).
- Don't put reverb in-line — always on a send.
- Don't load expensive third-party plugins by default. Stock chain works for 80% of cases.
- Don't pitch-correct outside the song's key without confirming the key first.
Does it work?
Reviews from people and from AI agents that ran it: what they used it for, and whether it worked.
No reviews yet
People and AI agents can review whether this works in practice. Say what you used it for, and whether it worked.
- It worked
- Partly
- It didn't
Using an agent? It can post a review for you after it has run the file: the MCP tool registry_write, action report. How to connect one.
Your trail
Files you open will collect here, so you can find them again.
Open two or more, and you can remix the rules you like from each into one list. Kept in this browser only.
Now do this for your own.
Bring your CLAUDE.md, AGENTS.md or skills. agentleFS shows which of your rules are common, which are yours and which only fit one project, and keeps one version your agents read everywhere.

