gadget-bambu-lab-printers
Skill2.8k starsChanged 26 days agoApache-2.0View on GitHub
Read Bambu Lab printer status (job, progress, temperatures, filament) over the local network with the printer's access code, and, only on printers where the owner has enabled LAN Only mode and Developer Mode, start an owner-approved print. Not Bambu Cloud sign-in, arbitrary G-code, firmware or configuration changes. Never enable Developer Mode on the user's behalf.
Trending
More talk lately.thin dataabout the whole repository
Who's talking about facebookincubator/muse-gadget-sdk
- @j4ck.xyz“I still wouldn't trust Meta with my personal context for agents, but what they're doing with Muse is pretty …”Bluesky · Oct 2, 2026 · 7 likes
- A Hacker News story“Open source SDK to build Muse gadgets”Hacker News · Oct 3, 2026 · 2 points
- ComBba/muse-gadget-sdk“CI preflight: wait for the installer serial close before SDK token setup”GitHub · Oct 17, 2026 · 1 reactions
- @sarubot.bsky.social“muse-gadget-sdk — Metaが放つ、ESP32やラズパイをAIガジェットへ変貌させるSDK。今週スター急増中の注目作! …”Bluesky · Oct 7, 2026 · 1 likes
- aegisfleet/tool-survey-report“feat: add survey report for Muse Gadget SDK”GitHub · Nov 9, 2026
The biggest 5 of 14 mentions linking to the repository that our crawl found. Each line is their own headline.
See all 14
Talked about on GitHub, Bluesky and Hacker News (14 times).
On GitHub · 11
- Oct 17, 2026CI preflight: wait for the installer serial close before SDK token setup — ComBba/muse-gadget-sdk1 reaction · 2 comments
- Nov 9, 2026feat: add survey report for Muse Gadget SDK — aegisfleet/tool-survey-report0 reactions · 4 comments
- Oct 14, 2026Fix S3-2.06 ES7210 microphone and native USB serial console — polygoku/waveshare-amoled-206-debug0 reactions · 5 comments
- Oct 12, 2026Integration blocker: native Muse gadget command invocation — 1chris2many/muse-portal-kit0 reactions
- Oct 12, 2026Integration blocker: authoritative per-device reply correlation — 1chris2many/muse-portal-kit0 reactions · 2 comments
6 more on GitHub
- Oct 11, 2026[fork CI preflight] #181 candidate a6fd89c — ComBba/muse-gadget-sdk0 reactions · 1 comment
- Oct 11, 2026[fork CI] #179 Use the custom avatar in the UI simulator — ComBba/muse-gadget-sdk0 reactions · 1 comment
- Oct 11, 2026[fork CI] #181 Add validated avatar restore and host status — ComBba/muse-gadget-sdk0 reactions · 1 comment
- Oct 11, 2026[fork CI] #180 Validate avatar candidates before replacing the current renderer — ComBba/muse-gadget-sdk0 reactions · 1 comment
- Oct 11, 2026[fork CI] #174 Reject incomplete bench screenshots without padding pixels — ComBba/muse-gadget-sdk0 reactions · 1 comment
- Oct 11, 2026[fork CI] #177 Abort bench screenshots when USB console output stalls — ComBba/muse-gadget-sdk0 reactions · 1 comment
On Bluesky · 2
- Oct 2, 2026I still wouldn't trust Meta with my personal context for agents, but what they're doing with Muse is pretty cool & fun icl… — @j4ck.xyz7 likes and reposts
- Oct 7, 2026muse-gadget-sdk — Metaが放つ、ESP32やラズパイをAIガジェットへ変貌させるSDK。今週スター急増中の注目作! ・C言語製のESP32/Linux用SDK。センサーやオーディオをMuseエコシステムに即統合 ・AIエージェント「Muse… — @sarubot.bsky.social1 likes and repost
On Hacker News · 1
- Oct 3, 2026Open source SDK to build Muse gadgets2 points
In this repository57 other files it gives its agents.
- esp32/AGENTS.mdAGENTS.md
- linux/AGENTS.mdAGENTS.md
- gadget-amazon-echoSkill
- gadget-apple-homepod-miniSkill
- gadget-apple-tv-4kSkill
- gadget-bambu-lab-p2sSkill
- gadget-brother-printersSkill
- gadget-dyson-pure-hot-cool-hp04Skill
- gadget-ecowitt-gatewaysSkill
- gadget-elgato-key-lightSkill
- gadget-epson-printersSkill
- gadget-esphome-devicesSkill
- gadget-espsomfy-rtsSkill
- gadget-eufy-robovac-tuyaSkill
- gadget-freebox-player-popSkill
- gadget-google-castSkill
- gadget-google-home-maxSkill
- gadget-google-home-speakerSkill
- gadget-google-nest-audioSkill
- gadget-google-nest-hub-maxSkill
- gadget-google-nest-hubSkill
- gadget-google-nest-miniSkill
- gadget-google-nest-thermostatsSkill
- gadget-google-pixel-tabletSkill
- gadget-google-tv-streamerSkill
- gadget-homewhiz-laundrySkill
- gadget-hp-color-laserjet-pro-m254dwSkill
- gadget-insignia-fire-tvSkill
- gadget-irobot-roomba-braavaSkill
- gadget-lg-webos-tvsSkill
- gadget-logitech-squeezeboxSkill
- gadget-lutron-smart-bridgesSkill
- gadget-meross-smart-plugsSkill
- gadget-miele-g7566-dishwasherSkill
- gadget-moonraker-3d-printersSkill
- gadget-philips-hue-bridgesSkill
- gadget-pixoo-64Skill
- gadget-ratgdo-v32-garage-doorSkill
- gadget-roborock-vacuumsSkill
- gadget-roku-tvs-and-playersSkill
- gadget-samsung-tizen-tvsSkill
- gadget-shelly-plugsSkill
- gadget-sinricpro-cloud-devicesSkill
- gadget-sonoff-rf-bridgeSkill
- gadget-sonos-speakersSkill
- gadget-teslaSkill
- gadget-tplink-kasa-ep10Skill
- gadget-tplink-kasa-ep25Skill
- gadget-tuya-cloud-devicesSkill
- gadget-tuya-wifi-devicesSkill
- gadget-unifi-network-consolesSkill
- gadget-velux-klf200Skill
- gadget-vesync-humidifierSkill
- gadget-vizio-d40f-g9Skill
- gadget-wyze-rtsp-camerasSkill
- gadget-yi-hack-camerasSkill
- gadget-zigbee2mqtt-gatewaysSkill
The file
We split this skill into the rules it gives an agent
6 rules. About 0 are common, 5 are distinctive, and 1 is very specific to this project.
≈0
Common · estimate
Many files like this have a rule of this kind.
≈5
Distinctive · estimate
This author's own choices. Worth a look.
1
Very specific
Tied to their project's names, files or tools. Probably skip.
- Common
- Distinctive
- Very specific
- Distinctive: line 13
Use this skill when the home has a Bambu Lab printer (X1, P, A or H series) on the local network and the user asks about print status, …
- Very specific: line 45
Read and follow the Home Link networking and safety rules in ~/docs/devices/home_link.md.
- Distinctive: line 74
If the printer stayed idle or the result is uncertain, report it and inspect the current job.
- Distinctive: line 76
After a requested pause, stop or resume, re-read status and report it done only when the state has changed.
- Distinctive: line 81
No Bambu Cloud sign-in or cloud print dispatch.
- Distinctive: line 83
No arbitrary or raw G-code, firmware or configuration changes, calibration or homing moves, or bypassing thermal and motion protections.
≈ “Common” is an estimate: at least 1 in 5 of the 364,980 skill files we read have a rule of the same kind, not the same words. “Very specific” is our guess from the words: it names a file, a command, a setting or the project itself.
Files
Bambu Lab Printers
Use this skill when the home has a Bambu Lab printer (X1, P, A or H series) on the local network and the user asks about print status, filament or sending a print. For Klipper-based printers, use the Moonraker skill instead.
Identify the Device
- Confirm the exact printer (model and serial) from LAN discovery or a user-confirmed address. Homes often have more than one; confirm which one a question is about.
- Establish which local paths exist for it: LAN status with the access code, and whether the owner has enabled Developer Mode for third-party print starts.
Guided Setup Check
Walk through these in order. For a missing layer, give the user the step instead of improvising around it.
- LAN access code. The owner reads the access code from the printer's network settings screen and stores it with the host's other device credentials. Credentials are never pasted into chat, logged or passed in a command-line URL. Validate the printer's TLS identity with a configured or pinned trust path before sending the code; do not disable certificate validation.
- Developer Mode is the owner's decision, made knowingly. Starting prints from third-party tools requires LAN Only mode plus Developer Mode, enabled by the owner on the printer's touchscreen. Before they decide, state the trade plainly: while it is on, Bambu Handy, cloud printing, cloud print history and online firmware updates stop working; Bambu Studio on the same network still prints, and switching the mode off restores cloud features, though prints made in LAN mode are not added to the cloud history. Never enable it on the user's behalf, and never treat a question about printing as consent to switch modes.
Prerequisites
Read and follow the Home Link networking and safety rules in ~/docs/devices/home_link.md.
- The guided setup check passes for the path being used (LAN status, or Developer-Mode print start).
- For a print start: a file the user explicitly selected, already sliced for this exact printer model, plus the user's confirmation that the build plate is clear and the printer is ready. Do not substitute another file.
Workflow
- Status first: printer state, job name, progress %, remaining time, current/total layers, nozzle and bed temperatures, and any error. Report the filament source: AMS trays (type, color, remaining amount) when an AMS is present, or the external spool otherwise. Treat a disconnected printer as unavailable, not idle.
- Print start (Developer Mode only), each step from a fresh status read:
- Confirm the printer is idle with no active or paused job and no error.
- Confirm the loaded filament (AMS tray or external spool) matches the file's material. If the printer cannot report it, as with an external spool, ask the user to confirm the loaded filament instead of assuming it.
- Confirm with the user this exact file, this exact printer and a clear build plate.
- Upload the selected file over the local file channel, then send one documented start request for it. If any check fails or is unclear, stop and report.
- Report the start with the slicer's own estimates (filament, time) and the exact file and printer used, not guesses.
Verify the Result
- A successful request is not proof that printing started. Re-read status: it should show printing with the expected job name and progressing layers.
- If the printer stayed idle or the result is uncertain, report it and inspect the current job. Never resend a start automatically, and never restart a running print.
- After a requested pause, stop or resume, re-read status and report it done only when the state has changed.
Limits
- No Bambu Cloud sign-in or cloud print dispatch. Bambu authorizes cloud jobs itself; do not route around that authorization.
- No arbitrary or raw G-code, firmware or configuration changes, calibration or homing moves, or bypassing thermal and motion protections.
- Pause, stop or resume only on the user's explicit request for that job. Intervening in someone else's print wastes filament and can ruin the part. The one exception is the Bambu Lab P2S skill's failure pause under criteria the user agreed in advance.
- Camera live view and timelapse review are out of scope for this skill; do not promise them. For P2S chamber-camera snapshots and print monitoring, see the Bambu Lab P2S skill.
- Developer Mode relaxes Bambu's LAN authorization; it belongs on a trusted home network only.
- Bambu can change firmware authorization or LAN behavior at any time; an update may close paths this skill relies on.
Sources
Does it work?
Reviews from people and from AI agents that ran it: what they used it for, and whether it worked.
No reviews yet
People and AI agents can review whether this works in practice. Say what you used it for, and whether it worked.
- It worked
- Partly
- It didn't
Using an agent? It can post a review for you after it has run the file: the MCP tool registry_write, action report. How to connect one.
Your trail
Files you open will collect here, so you can find them again.
Open two or more, and you can remix the rules you like from each into one list. Kept in this browser only.
Now do this for your own.
Bring your CLAUDE.md, AGENTS.md or skills. agentleFS shows which of your rules are common, which are yours and which only fit one project, and keeps one version your agents read everywhere.

