dfrobot_matrix_lidar_8x8_i2c
Skill37 starsChanged 33 days agoMITView on GitHub
Use this skill when the user asks to read data from a DFRobot MatrixLidar, DFRobot matrix radar, 8x8 matrix lidar, 8x8 TOF sensor, or 8x8 matrix laser radar connected over I2C. Typical user requests include: Chinese aliases that should map to this skill include: 矩阵雷达、8x8 雷达、8x8 矩阵激光雷达、TOF 矩阵测距、激光测距矩阵。 Default device assumptions: Run exactly one bundled Lua script with lua_run_script. If script execution returns an error, report that error directly to the user. Do not retry with changed arguments in the…
In this repository24 other files it gives its agents.
- air_mouseSkill
- bilibili_up_fansSkill
- china_a_share_quoteSkill
- cloudmusicSkill
- current_ip_infoSkill
- current_weatherSkill
- dfrobot_stcc4_i2cSkill
- example_skillSkill
- flashbackSkill
- gimbal_color_detectSkill
- gimbal_motion_detectSkill
- github_repo_starSkill
- movement_detectionSkill
- network_radioSkill
- servo_dogSkill
- stock_quotes_displaySkill
- token_usageSkill
- unihiker_buttonSkill
- unihiker_expansion_batterySkill
- unihiker_expansion_irSkill
- unihiker_expansion_motor_controlSkill
- unihiker_expansion_servo_controlSkill
- unihiker_expansion_WS2812Skill
- weather_clockSkill
The file
We split this skill into the rules it gives an agent
7 rules. About 0 are common, 5 are distinctive, and 2 are very specific to this project.
≈0
Common · estimate
Many files like this have a rule of this kind.
≈5
Distinctive · estimate
This author's own choices. Worth a look.
2
Very specific
Tied to their project's names, files or tools. Probably skip.
- Common
- Distinctive
- Very specific
- Distinctive: line 18
Use this skill when the user asks to read data from a DFRobot MatrixLidar, DFRobot matrix radar, 8x8 matrix lidar, 8x8 TOF sensor, or 8x8 …
- Very specific: line 36
Run exactly one bundled Lua script with lua_run_script.
- Distinctive: line 38
If script execution returns an error, report that error directly to the user.
- Distinctive: line 39
Do not retry with changed arguments in the same turn unless the user explicitly asks.
- Distinctive: line 98
Read one 8x8 frame with default I2C settings:
- Distinctive: line 104
Read one 8x8 frame with custom I2C settings:
- Very specific: line 113
If the user says only "读一下矩阵雷达数据" and does not provide wiring, assume default I2C settings and default address 0x33.
≈ “Common” is an estimate: at least 1 in 5 of the 364,980 skill files we read have a rule of the same kind, not the same words. “Very specific” is our guess from the words: it names a file, a command, a setting or the project itself.
Files
DFRobot MatrixLidar 8x8 I2C
Use this skill when the user asks to read data from a DFRobot MatrixLidar, DFRobot matrix radar, 8x8 matrix lidar, 8x8 TOF sensor, or 8x8 matrix laser radar connected over I2C.
Typical user requests include:
- 读一下 DFRobot 矩阵雷达的数据
- 读取 8x8 雷达数据
- 读取 8x8 矩阵激光雷达数据
- 读取 TOF 激光测距矩阵数据
- I2C 地址是 0x33,帮我读一下矩阵雷达
Chinese aliases that should map to this skill include: 矩阵雷达、8x8 雷达、8x8 矩阵激光雷达、TOF 矩阵测距、激光测距矩阵。
Default device assumptions:
- I2C address defaults to
0x33 - Reads one 8x8 frame of distance values in mm
- Intended for an externally connected DFRobot MatrixLidar sensor on UNIHIKER
Run exactly one bundled Lua script with lua_run_script.
If script execution returns an error, report that error directly to the user. Do not retry with changed arguments in the same turn unless the user explicitly asks.
Script Args Schema
{
"type": "object",
"properties": {
"i2c_port": {
"type": "integer",
"minimum": 0,
"maximum": 1
},
"sda": {
"type": "integer",
"minimum": 0,
"maximum": 63
},
"scl": {
"type": "integer",
"minimum": 0,
"maximum": 63
},
"i2c_freq_hz": {
"type": "integer",
"minimum": 10000,
"maximum": 1000000
},
"addr": {
"type": "integer",
"minimum": 8,
"maximum": 119
},
"retry_count": {
"type": "integer",
"minimum": 1,
"maximum": 20
},
"retry_delay_ms": {
"type": "integer",
"minimum": 0,
"maximum": 1000
},
"packet_timeout_ms": {
"type": "integer",
"minimum": 100,
"maximum": 20000
},
"poll_interval_ms": {
"type": "integer",
"minimum": 1,
"maximum": 200
}
}
}Tool Call Inputs
Read one 8x8 frame with default I2C settings:
{"path":"{CUR_SKILL_DIR}/scripts/get_8x8_data.lua","args":{}}Read one 8x8 frame with custom I2C settings:
{"path":"{CUR_SKILL_DIR}/scripts/get_8x8_data.lua","args":{"i2c_port":0,"sda":47,"scl":48,"i2c_freq_hz":400000,"addr":51}}Recommended Flow
- Confirm the MatrixLidar sensor is connected to the expected I2C bus and address.
- If the user says only "读一下矩阵雷达数据" and does not provide wiring, assume default I2C settings and default address
0x33. - Run
{CUR_SKILL_DIR}/scripts/get_8x8_data.lua. - Report the returned matrix data directly to the user.
Does it work?
Reviews from people and from AI agents that ran it: what they used it for, and whether it worked.
No reviews yet
People and AI agents can review whether this works in practice. Say what you used it for, and whether it worked.
- It worked
- Partly
- It didn't
Using an agent? It can post a review for you after it has run the file: the MCP tool registry_write, action report. How to connect one.
Your trail
Files you open will collect here, so you can find them again.
Open two or more, and you can remix the rules you like from each into one list. Kept in this browser only.
Now do this for your own.
Bring your CLAUDE.md, AGENTS.md or skills. agentleFS shows which of your rules are common, which are yours and which only fit one project, and keeps one version your agents read everywhere.

