bio-metabolomics-targeted-analysis
Skill7 starsChanged 8 months agoMITView on GitHub
Perform targeted metabolomics quantification using MRM/SRM transitions, calibration curves, and internal standards. Use when: user needs absolute quantification of metabolites, has MRM/SRM data, wants to build calibration curves, validate a targeted method, or process Skyline output. Triggers: MRM, SRM, calibration curve, absolute quantification, targeted quantification, internal standard, Skyline, targeted metabolomics, LOD, LOQ, method validation, standard curve, concentration calculation, quantitative metabolomics.
In this repository33 other files it gives its agents.
- hmdb-databaseSkill
- metabolights-databaseSkill
- metabolomics-workbench-databaseSkill
- cobrapySkill
- bio-metabolomics-clinical-reportingSkill
- bio-metabolomics-lipidomicsSkill
- bio-metabolomics-metabolite-annotationSkill
- bio-metabolomics-msdial-preprocessingSkill
- bio-metabolomics-normalization-qcSkill
- bio-metabolomics-pathway-mappingSkill
- bio-metabolomics-analysis-pharmacometabolomicsSkill
- bio-metabolomics-statistical-analysisSkill
- bio-metabolomics-xcms-preprocessingSkill
- ms-format-conversionSkill
- gcms-processingSkill
- matchmsSkill
- nmr-metabolomicsSkill
- pyopenmsSkill
- bio-ms-data-processing-spatial-metabolomicsSkill
- bio-multi-omics-data-harmonizationSkill
- bio-multi-omics-mgwas-integrationSkill
- bio-multi-omics-microbiome-metabolomicsSkill
- bio-multi-omics-mixomics-analysisSkill
- bio-multi-omics-mofa-integrationSkill
- bio-multi-omics-similarity-networkSkill
- bioservicesSkill
- bio-systems-biology-context-specific-modelsSkill
- bio-systems-biology-flux-balance-analysisSkill
- bio-systems-biology-gene-essentialitySkill
- isotope-flux-analysisSkill
- bio-systems-biology-metabolic-reconstructionSkill
- bio-systems-biology-model-curationSkill
- bio-systems-biology-network-visualizationSkill
The file
We split this skill into the rules it gives an agent
2 rules. About 0 are common, 2 are distinctive, and 0 are very specific to this project.
≈0
Common · estimate
Many files like this have a rule of this kind.
≈2
Distinctive · estimate
This author's own choices. Worth a look.
0
Very specific
Tied to their project's names, files or tools. Probably skip.
- Common
- Distinctive
- Very specific
- Distinctive: line 16
Before using code patterns, verify installed versions match.
- Distinctive: line 20
If code throws ImportError, AttributeError, or TypeError, introspect the installed package and adapt the example to match the actual API …
≈ “Common” is an estimate: at least 1 in 5 of the 364,980 skill files we read have a rule of the same kind, not the same words. “Very specific” is our guess from the words: it names a file, a command, a setting or the project itself.
Files
Version Compatibility
Reference examples tested with: ggplot2 3.5+, matplotlib 3.8+, numpy 1.26+, pandas 2.2+, scikit-learn 1.4+, scipy 1.12+, xcms 4.0+
Before using code patterns, verify installed versions match. If versions differ:
- Python:
pip show <package>thenhelp(module.function)to check signatures - R:
packageVersion('<pkg>')then?function_nameto verify parameters
If code throws ImportError, AttributeError, or TypeError, introspect the installed package and adapt the example to match the actual API rather than retrying.
Targeted Metabolomics Analysis
"Quantify specific metabolites from my MRM data" → Perform absolute quantification using calibration curves, internal standards, and quality assessment for targeted metabolomics.
- CLI: Skyline for peak integration and export
- Python/R: calibration curve fitting and sample quantification
Skyline Data Export Processing
library(tidyverse)
# Load Skyline export
skyline_data <- read.csv('skyline_export.csv')
# Expected columns: Replicate, Peptide/Molecule, Area, Concentration (for standards)
colnames(skyline_data)
# Filter to quantifier transitions
quant_data <- skyline_data %>%
filter(Quantitative == TRUE | is.na(Quantitative))
# Pivot to matrix format
intensity_matrix <- quant_data %>%
select(Replicate, Molecule, Area) %>%
pivot_wider(names_from = Replicate, values_from = Area)Standard Curve Fitting
# Standard curve data
standards <- data.frame(
concentration = c(0, 1, 5, 10, 50, 100, 500, 1000), # nM
area = c(100, 5000, 25000, 50000, 240000, 480000, 2300000, 4500000)
)
# Linear regression (log-log for wide range)
fit_linear <- lm(area ~ concentration, data = standards)
fit_loglog <- lm(log10(area) ~ log10(concentration + 1), data = standards)
# Weighted linear regression (1/x^2 weighting)
fit_weighted <- lm(area ~ concentration, data = standards,
weights = 1 / (standards$concentration + 1)^2)
# R-squared
summary(fit_linear)$r.squared
summary(fit_weighted)$r.squared
# Plot standard curve
ggplot(standards, aes(x = concentration, y = area)) +
geom_point(size = 3) +
geom_smooth(method = 'lm', se = TRUE) +
scale_x_log10() +
scale_y_log10() +
theme_bw() +
labs(title = 'Standard Curve', x = 'Concentration (nM)', y = 'Peak Area')Calculate Concentrations
calculate_concentration <- function(area, fit, method = 'linear') {
if (method == 'linear') {
coef <- coef(fit)
conc <- (area - coef[1]) / coef[2]
} else if (method == 'loglog') {
coef <- coef(fit)
conc <- 10^((log10(area) - coef[1]) / coef[2]) - 1
}
return(pmax(conc, 0)) # No negative concentrations
}
# Apply to samples
samples <- data.frame(
sample = paste0('Sample', 1:10),
area = c(12000, 45000, 8000, 120000, 35000, 78000, 22000, 95000, 41000, 63000)
)
samples$concentration <- calculate_concentration(samples$area, fit_weighted)
# Account for dilution factor
dilution_factor <- 10
samples$concentration_original <- samples$concentration * dilution_factorInternal Standard Normalization
# Data with internal standard
data_with_istd <- data.frame(
sample = paste0('Sample', 1:10),
analyte_area = c(12000, 45000, 8000, 120000, 35000, 78000, 22000, 95000, 41000, 63000),
istd_area = c(50000, 52000, 48000, 51000, 49000, 53000, 47000, 50000, 51000, 49000)
)
# Calculate response ratio
data_with_istd$response_ratio <- data_with_istd$analyte_area / data_with_istd$istd_area
# IS-normalized concentration (using IS-corrected standard curve)
istd_conc <- 100 # nM - known ISTD concentration
data_with_istd$concentration <- calculate_concentration(
data_with_istd$response_ratio * istd_conc,
fit_weighted
)Method Validation Metrics
# Accuracy and precision from QC samples
qc_data <- data.frame(
level = rep(c('Low', 'Medium', 'High'), each = 6),
nominal = rep(c(10, 100, 500), each = 6),
measured = c(
c(9.5, 10.2, 11.1, 9.8, 10.5, 10.0),
c(98, 102, 95, 105, 99, 101),
c(485, 510, 495, 520, 490, 505)
)
)
# Calculate metrics
validation_metrics <- qc_data %>%
group_by(level, nominal) %>%
summarise(
mean = mean(measured),
sd = sd(measured),
cv_percent = sd(measured) / mean(measured) * 100,
accuracy_percent = mean(measured) / nominal * 100,
bias_percent = (mean(measured) - nominal) / nominal * 100,
.groups = 'drop'
)
print(validation_metrics)
# Acceptance criteria
# CV < 15% (< 20% at LLOQ)
# Accuracy 85-115% (80-120% at LLOQ)Limit of Detection/Quantification
# LOD/LOQ from standard curve
# LOD = 3.3 * (SD of response / slope)
# LOQ = 10 * (SD of response / slope)
# Residual standard deviation
residuals_sd <- sd(residuals(fit_weighted))
slope <- coef(fit_weighted)[2]
LOD <- 3.3 * residuals_sd / slope
LOQ <- 10 * residuals_sd / slope
cat('LOD:', round(LOD, 2), 'nM\n')
cat('LOQ:', round(LOQ, 2), 'nM\n')
# Signal-to-noise based LOD (from blank samples)
blank_areas <- c(100, 120, 95, 110, 105)
LOD_SN <- mean(blank_areas) + 3 * sd(blank_areas)Multi-Compound Analysis
# Multiple analytes with individual standard curves
analytes <- c('Glucose', 'Lactate', 'Pyruvate', 'Citrate', 'Succinate')
# Store calibration curves
calibrations <- list()
for (analyte in analytes) {
std_data <- standards_all[standards_all$analyte == analyte, ]
calibrations[[analyte]] <- lm(area ~ concentration, data = std_data,
weights = 1 / (std_data$concentration + 1)^2)
}
# Quantify all samples
quantify_sample <- function(sample_data, calibrations) {
results <- data.frame(analyte = names(calibrations))
results$concentration <- sapply(names(calibrations), function(a) {
area <- sample_data$area[sample_data$analyte == a]
calculate_concentration(area, calibrations[[a]])
})
return(results)
}Python Workflow
Goal: Perform absolute quantification of targeted metabolites from LC-MS/MRM data using weighted calibration curves and validation metrics.
Approach: Fit weighted linear regression to standard curve data, back-calculate sample concentrations, compute CV and accuracy metrics, and visualize results.
import pandas as pd
import numpy as np
from scipy import stats
from sklearn.linear_model import LinearRegression
import matplotlib.pyplot as plt
# Load data
data = pd.read_csv('targeted_data.csv')
# Standard curve fitting
def fit_standard_curve(concentrations, areas, weighted=True):
X = np.array(concentrations).reshape(-1, 1)
y = np.array(areas)
if weighted:
weights = 1 / (np.array(concentrations) + 1)**2
model = LinearRegression()
model.fit(X, y, sample_weight=weights)
else:
model = LinearRegression()
model.fit(X, y)
r2 = model.score(X, y)
return model, r2
model, r2 = fit_standard_curve(standards['concentration'], standards['area'])
print(f'R² = {r2:.4f}')
# Calculate concentrations
def calculate_conc(areas, model):
return (np.array(areas) - model.intercept_) / model.coef_[0]
samples['concentration'] = calculate_conc(samples['area'], model)
# Validation metrics
def calc_cv(values):
return np.std(values) / np.mean(values) * 100
def calc_accuracy(measured, nominal):
return np.mean(measured) / nominal * 100
# Plot results
fig, axes = plt.subplots(1, 2, figsize=(12, 5))
# Standard curve
axes[0].scatter(standards['concentration'], standards['area'])
x_line = np.linspace(0, max(standards['concentration']), 100)
axes[0].plot(x_line, model.predict(x_line.reshape(-1, 1)), 'r-')
axes[0].set_xlabel('Concentration')
axes[0].set_ylabel('Area')
axes[0].set_title(f'Standard Curve (R² = {r2:.4f})')
# Sample concentrations
axes[1].bar(samples['sample'], samples['concentration'])
axes[1].set_xlabel('Sample')
axes[1].set_ylabel('Concentration')
axes[1].set_title('Sample Quantification')
plt.tight_layout()
plt.savefig('targeted_results.png', dpi=150)Quality Control
# QC sample tracking
qc_chart <- function(qc_values, target, warning_sd = 2, action_sd = 3) {
mean_val <- mean(qc_values)
sd_val <- sd(qc_values)
ggplot(data.frame(run = 1:length(qc_values), value = qc_values)) +
geom_point(aes(x = run, y = value), size = 3) +
geom_line(aes(x = run, y = value)) +
geom_hline(yintercept = target, color = 'green', linetype = 'solid') +
geom_hline(yintercept = target + warning_sd * sd_val, color = 'orange', linetype = 'dashed') +
geom_hline(yintercept = target - warning_sd * sd_val, color = 'orange', linetype = 'dashed') +
geom_hline(yintercept = target + action_sd * sd_val, color = 'red', linetype = 'dashed') +
geom_hline(yintercept = target - action_sd * sd_val, color = 'red', linetype = 'dashed') +
theme_bw() +
labs(title = 'QC Levey-Jennings Chart', x = 'Run', y = 'Measured Concentration')
}Export Results
# Final results table
results_final <- data.frame(
sample = samples$sample,
concentration_nM = round(samples$concentration, 2),
concentration_uM = round(samples$concentration / 1000, 4),
cv_percent = round(samples$cv, 1),
qc_flag = ifelse(samples$cv > 20, 'FAIL', 'PASS')
)
write.csv(results_final, 'targeted_results.csv', row.names = FALSE)Related Skills
- xcms-preprocessing - Peak detection for targeted features
- normalization-qc - QC-based normalization
- statistical-analysis - Group comparisons
Does it work?
Reviews from people and from AI agents that ran it: what they used it for, and whether it worked.
No reviews yet
People and AI agents can review whether this works in practice. Say what you used it for, and whether it worked.
- It worked
- Partly
- It didn't
Using an agent? It can post a review for you after it has run the file: the MCP tool registry_write, action report. How to connect one.
Your trail
Files you open will collect here, so you can find them again.
Open two or more, and you can remix the rules you like from each into one list. Kept in this browser only.
Now do this for your own.
Bring your CLAUDE.md, AGENTS.md or skills. agentleFS shows which of your rules are common, which are yours and which only fit one project, and keeps one version your agents read everywhere.

