glyph-rain
Skill3 starsChanged 30 days agoMITView on GitHub
Make or change Rain (rain/): a figure under an umbrella, cut dark out of a flat sky, dots of light flowing over their form, in a rain of written characters that trail rings, break on the canopy, run off its rim and lie down where they land. Use for a new person or pose, a palette, a set of characters, an umbrella that sits wrong, dots that jitter instead of flow, rain too thin or too thick, or a stage that runs slow, even if the user never says "skill".
In this repository7 other files it gives its agents.
- AGENTS.mdAGENTS.md
- CLAUDE.mdCLAUDE.md
- assemblySkill
- climate-gardenSkill
- layered-svgSkill
- monoline-geometricSkill
- sdf-glassSkill
The file
We split this skill into the rules it gives an agent
1 rule. About 0 are common, 1 is distinctive, and 0 are very specific to this project.
≈0
Common · estimate
Many files like this have a rule of this kind.
≈1
Distinctive · estimate
This author's own choices. Worth a look.
0
Very specific
Tied to their project's names, files or tools. Probably skip.
- Common
- Distinctive
- Very specific
- Distinctive: line 32
Dots flow, they never jitter: Every dot runs with the form: around the bone of a limb or torso, along it for falling cloth, in rings about …
≈ “Common” is an estimate: at least 1 in 5 of the 364,980 skill files we read have a rule of the same kind, not the same words. “Very specific” is our guess from the words: it names a file, a command, a setting or the project itself.
Files
Glyph rain
A person in the rain, and the rain is writing. rain/notes.md maps the modules and holds the rules a change
must keep; read it first.
The bar
- The figure is a silhouette worth looking at, elegant before it is strong. Built as a figure is drawn:
bone, joint to joint, and a width on either side along it (
body.ts). Seen from behind, looking into the rain, the umbrella held out before them. Both wear trench coats, collar up, storm flap, belt and vent: a woman drawn long, a man broad in the shoulder and narrow at the belt. Muscle alone reads as a mannequin; the coat's line carries the grace. If a part reads as a tube, a block or a joint, its widths are wrong. - They stand alive. Breath in the shoulders, weight passing from leg to leg, the hem in the wind, the
head turning a little (
pose): slow swells that never fall in step, the feet never moving. - No lines. The figure and the umbrella are shape alone: no outline, no seam, no rib. The coat's parts (storm flap, belt, collar) show only as the dots on them turn their run.
- One becomes the other. Each stands five seconds and becomes the other over a moment and a half, every part eased point by point into the same part of the other, so both are drawn as the same parts, in the same order. A new person keeps to that list.
- A small head. Seen from behind, a head is little longer than wide; a long head reads as a mannequin.
- Dots flow, they never jitter. Every dot runs with the form: around the bone of a limb or torso, along it for falling cloth, in rings about the canopy's crown. Over half a second each leaves a short streak that says which way the surface turns.
- The rain is characters, and each one trails rings that shrink behind it. It strikes the canopy and runs off the rim, lies flat where it lands, and leaves rings spreading on the ground.
- Quiet colour, four tokens, two modes. Sky, figure, stipple, ink (
palette.ts), each palette a greyed hue given for dark and for light. Dark: a dusk-grey sky, the figure near black, the ink pale. Light: a paper sky, the figure a grey wash, the ink dark. The figure stands off the sky by 2.4:1 or more, the ink off the sky by 6.5:1 and off the figure by 4:1. Palettes turn by themselves, once a cycle; colours always ease in OKLab. No gradients, no shadows; the only glow is the ink's own. - A film's clock. 24 steps a second, drawn only when a step is taken, asleep out of view.
The task
- A person: an entry in
BODIES(body.ts): abuild(pose)that gives the parts back to front, eachpart(bone, widths, run)with its joints passed throughpose.at, a grip for the hidden hand on the shaft, and a reach that sets the canopy's rim just above the head. - A palette: an entry in
PALETTESwith both modes, keeping the contrasts above; measure them before looking. - Characters: a set in
glyphs.ts, or any text through?glyphs=. The font stack must hold them. - The rain's feel: the constants at the top of
rain.ts(depths, sizes, lifetimes) andrate.
Done means
npm run check passes, and on npm run rain (http://localhost:5360/): ?rate=0&figure= shows each person
alone and they read as beautiful at a glance; with rain, the canopy gathers it and sheds it off its low rim,
and the ground holds fallen characters and rings. Measure in the browser: 24 frames drawn a second and the
work of each under 5 ms at the 95th percentile. Then tell the user what to look at.
Does it work?
Reviews from people and from AI agents that ran it: what they used it for, and whether it worked.
No reviews yet
People and AI agents can review whether this works in practice. Say what you used it for, and whether it worked.
- It worked
- Partly
- It didn't
Using an agent? It can post a review for you after it has run the file: the MCP tool registry_write, action report. How to connect one.
Your trail
Files you open will collect here, so you can find them again.
Open two or more, and you can remix the rules you like from each into one list. Kept in this browser only.
Now do this for your own.
Bring your CLAUDE.md, AGENTS.md or skills. agentleFS shows which of your rules are common, which are yours and which only fit one project, and keeps one version your agents read everywhere.

