power-design
Skill9 starsChanged 4 months agoMITView on GitHub
设计多路隔离供电系统并校验余量。当用户要"设计供电/电源""算电流预算""选稳压/DCDC""分电源轨"时使用。按电机堵转电流(不是标称)算每轨负载,产出 design/power.yaml + power.md,并用 tools/power_budget.py 做确定性校验,需人工批准。
3 other projects use a version of this.
Adopted by
Most recently taken up by
- SoftMissT/tudo-sobre-vibe-codingtheir own version, first seen Oct 1, 2026
- ItsssssJack/power-designtheir own version, first seen Jul 5, 2026
- inematds/power-designtheir own version, first seen May 3, 2026
Other versions3 projects use a version of this.
Word for word · 0
None found.
Edited · 0
None found.
Wrote their own version · 3
- ItsssssJack/power-design★ 652same name
- SoftMissT/tudo-sobre-vibe-coding★ 8same name
- inematds/power-design★ 2same name
How matches are found. Word for word: the exact same text. Edited: shares passages with this file (“99% same” means 99% of its five-word phrases also appear here; 10% or more counts). Their own version: similar meaning, or, weakest, the same name. We can’t tell which project had it first. Projects are counted among the 200 most-starred candidates, and mentions are links to the repository we found, up to 50 per site, so both counts are a floor.
In this repository11 other files it gives its agents.
- CLAUDE.mdCLAUDE.md
- boardSkill
- elec-designSkill
- firmware-scaffoldSkill
- interconnectSkill
- plan-solutionSkill
- read-problemSkill
- select-partsSkill
- setup-envSkill
- test-checklistSkill
- vision-scaffoldSkill
The file
Files
power-design —— 供电系统(流水线 ⑤)
lane: 任何模型(正确性交 power_budget.py) · 门: 人工批 + power_budget PASS
电源是 1 号翻车点:电机堵转瞬态把 MCU 拉掉电复位。一切按最坏情况算。
前置
design/solution.md(需求)+ design/bom.csv(选了哪些件/稳压)。
步骤
- 分轨(典型 4 轨,按方案裁剪):
VM_motor—— 电池直供电机驱动(不稳压,加保险/铺铜)。V5_servo—— 舵机独立 5~6V 高电流轨(勿挂逻辑轨,堵转>1A)。V3V3_logic—— MCU + 模拟传感器,AMS1117 或 buck。V5_k230—— K230 独立 5V(耗流远大于 MCU)。
- 派负载(Read KB
04/05取电流;电机/舵机标stall: true用堵转电流)。稳压器从bom.csv取,没有就提示在配件表/jlc_search选。 - 写
design/power.yaml(schema 见tools/power_budget.py头注;参考examples/sending-medicine-2023/power.yaml)。 - 跑确定性门:
python tools/power_budget.py design/power.yaml。FAIL(某轨欠流)就换更大稳压或加 buck,重跑直到 PASS。 - 写
design/power.md(人类可读:分轨图 + 预算表 + 选的稳压 + 注意),更新STATUS.md。 - 人工门:用户确认稳压选型与电池容量。
关键纪律
- 电机/舵机一律
stall: true;逻辑用标称。默认余量 30%。 - 电机 VM 与逻辑 GND 分开回流再单点汇合(接线阶段落实)。
- power_budget PASS 是必要非充分——电池容量/放电倍率、保险、铺铜宽度仍需人工核(接线阶段)。
Does it work?
Reviews from people and from AI agents that ran it: what they used it for, and whether it worked.
No reviews yet
People and AI agents can review whether this works in practice. Say what you used it for, and whether it worked.
- It worked
- Partly
- It didn't
Using an agent? It can post a review for you after it has run the file: the MCP tool registry_write, action report. How to connect one.
Your trail
Files you open will collect here, so you can find them again.
Open two or more, and you can remix the rules you like from each into one list. Kept in this browser only.
Now do this for your own.
Bring your CLAUDE.md, AGENTS.md or skills. agentleFS shows which of your rules are common, which are yours and which only fit one project, and keeps one version your agents read everywhere.

