Commit

Analyze staged changes and generate a clear commit message.

Trigger

/core-commit or /core-commit [extra context]

Process

1. Pre-flight Checks

Run in parallel:

• git status - review staged/unstaged changes
• git diff --cached --stat - size and shape of the change (or git diff --stat if nothing staged)

Do not read the full diff yet. § 2's routing test runs on the stat alone, and it decides who owns the read: a split routes to multi-commit-split.md § 0, which freezes the diff to a file and reads it there. Reading it here as well duplicates that read — on a real split changeset that is tens of thousands of tokens for nothing (SKILL-PATTERNS.md § Token Efficiency, item 4).

Once § 2 routes to the 1-group or 2-group path, read the full diff (git diff --cached, or git diff) only when the stat totals stay under ~1500 changed lines. At or above that, keep it out of this thread and classify from the stat plus targeted reads of the files whose message you cannot write without them.

Stop conditions (report and exit):

• No changes → "No changes to commit"
• Rebase in progress → "Rebase active, resolve first with git rebase --continue or --abort"
• Merge in progress → "Merge conflict active, resolve first"
• Cherry-pick in progress → "Cherry-pick active, resolve first"

Platform note: Always use cd "<project-root>" && git <command> instead of git -C <path>. The -C flag has known issues with Windows paths containing backslashes.

Detect rebase/merge state:

# Check for active operations
ls .git/rebase-merge .git/rebase-apply \
   .git/MERGE_HEAD .git/CHERRY_PICK_HEAD 2>/dev/null

1.5. Convention + Ticket Detection

Steps 1–2 run once per project. Skip both if team.commitConvention is already set, or — in a repo without .project/project.json — if .git/core-commit-convention exists; read the cached value from whichever is present.

Neither cache invalidates on its own. The user saying the repo's convention changed (or a cached value that contradicts what git log now shows) is the signal to delete .git/core-commit-convention / clear team.commitConvention and re-run step 1.

1. Convention detect: count matches over the last 20 subjects — do not eyeball the list. Run the count, read the winner off it (>60% = 13+ of 20; no pattern reaches it → freeform):

   S=$(git log --pretty=%s -20)
   for p in '^[a-z]+(\([a-z-]+\))?: ' '^[A-Z]+-[0-9]+[: ]' '^\[[A-Z-]+\]'
   do
     printf '%s  %s\n' "$(printf '%s\n' "$S" | grep -cE "$p")" "$p"
   done

   --pretty=%s and not --oneline: the patterns are anchored at ^, which never matches past --oneline's sha prefix (and POSIX ERE has no \d).

   • ^[a-z]+(\([a-z-]+\))?: → "conventional" (Conventional Commits)
   • ^[A-Z]+-\d+[: ] → "ticket-prefix" (Jira/Linear style)
   • ^\[[A-Z-]+\] → "bracket" (bracket-tag style)
   • Otherwise → "freeform"

2. Cache the result — this is the skill's declared writes:, so it is a step, not an afterthought. Write the detected value now, before composing anything:

   PJ=.project/project.json
   jq '.team.commitConvention = "<detected>"' "$PJ" > "$PJ.tmp" \
     && mv "$PJ.tmp" "$PJ"

   For ticket-prefix, extract the prefix (e.g. "JIRA") into .team.ticketPrefix in the same write.

   No .project/project.json (e.g. this tool's own meta-repo) → cache inside .git instead, so detection stays a once-per-repo cost rather than a once-per-session one. Same two values, one line each:

   printf '%s\n' "<detected>" "<ticketPrefix or ->" \
     > "$(git rev-parse --git-dir)/core-commit-convention"

3. externalRef detect (per commit, unless not applicable):
   • No .project/features/ directory at all → not applicable, skip step 3 silently.
   • On a trunk branch (main/master) no feature matches and the name carries no ticket, so both lookups below are empty by construction → no externalRef, continue to step 4.
   • Otherwise read .project/features/{feature-name}/feature.json (the feature matching the current branch) → check externalRef:
     • type === "github" → prefix suggestion: (#{id}) as suffix
     • type === "jira" or "linear" → prefix suggestion: {id}: as prefix
   • No feature.json, or no feature matching the current branch → check the branch name against [A-Z]+-\d+ and use a match as prefix suggestion; no match either → no externalRef, continue without a prefix
4. Compose integration: hand the detected convention + externalRef to § 4 (Generate Message). Conservative: show the suggestion, user confirms before commit.

2. Detect Mixed Concerns, Then Stage

Detect first — the split path stages per commit, so a blanket git add -A would have to be undone. Run this against whatever diff you have (unstaged, or staged if something already is):

Group from git diff --stat / --name-only — by path pattern (.claude/ vs src/ vs public/) and by type (deletions-only vs additions). Do not read full diffs here: a split routes to § 0's inventory, which reads them once and owns the classification.

Paths only separate concerns that live in different directories. A single concern spanning a manifest, a util and its call sites reads as several groups; one file carrying two concerns reads as one. Ambiguous count → route to the split: § 0 reads the diff and settles it, so arriving there with one concern costs a granularity modal, while missing a third concern costs a rewritten history.

Todo: before anything is staged on any path below, Read .claude/skills/core-commit/references/staging-safety.md and apply its blocklist, warnings, and .gitignore coverage check. Every path runs these exactly once against the whole changeset — the ≥3-group path runs them at multi-commit-split.md § 0 instead of here, since § 0 freezes the path set they check.

Then apply the routing test, in this order:

• >2 groups, or any file touched by more than one group (a shared narrative file — README, CHANGELOG, a config/registry doc — is the usual case) → read references/multi-commit-split.md and follow it from § 0. Do not improvise a split by hand, and stage nothing first: § 0 freezes the pre-split baseline its integrity gate depends on.

• Exactly 2 groups, no file in both → each commit takes whole files, so nothing can be hand-split and lost. Suggest the split inline via AskUserQuestion:

  • "Split into separate commits (Recommended)" → stage and commit group 1, then group 2
  • "One commit" → proceed with everything

  Two guards still apply on top of the staging-safety > **Todo** above, since this path skips the reference's § 3.5 and § 4: run the test suite (discovered as in multi-commit-split.md § 4) before the first commit, and after the last one confirm git status --porcelain prints nothing. Whole-file staging plus a clean tree is the completeness proof here — no baseline freeze needed.

• 1 group → no split; continue to Then stage below.

Then stage, only when there are unstaged changes, nothing staged, and no split was triggered:

• Show an overview of unstaged files
• Ask: "Stage all changes?" (with AskUserQuestion) — "Yes (Recommended)" / "No"
• If yes: git add -A

3. Analyze Changes

Analyze the diff for:

Type (Conventional Commits):

Scope: Component/module name (optional) Breaking change: Add ! after type for breaking changes

Mixed concerns were already detected and routed in Step 2 — by this point the changeset is either one concern, or one commit of a split whose scope § 2 of multi-commit-split.md fixed.

4. Generate Message

Convention integration — apply the convention § 1.5 detected before shaping the header. conventional, or nothing detected → the format below, unchanged; that is the common case.

Todo: § 1.5 detected ticket-prefix, bracket, or freeform → Read .claude/skills/core-commit/references/message-shapes.md and shape the header per that file. Everything below still applies; only the header's shape differs.

Format (Conventional Commits 1.0.0):

<type>[optional scope][!]: <description>

[optional body]

[optional footer(s)]

Validation rules:

• Header max 72 characters (Git convention)
• Type: lowercase, from allowed list
• Subject: lowercase start, no trailing period, imperative mood ("add" not "added")
• Language: English — commit messages are always written in English regardless of the project's runtime language setting. Commit messages are not a runtime-output category and are not translated (see skills/shared/LANGUAGE.md).
• Body: empty line after header, explain "why" not "what"
• Breaking change: use ! or BREAKING CHANGE: footer

Examples:

feat(auth): add OAuth2 login support

fix!: resolve race condition in request handling

docs: update API documentation for v2 endpoints

Do not allow:

• Emojis in commit messages
• Subject longer than 72 characters

5. Confirm & Commit

Show the generated message and ask for confirmation (AskUserQuestion):

• "Commit (Recommended)" → execute commit
• "Edit" → allow user to modify
• "Cancel" → cancel

STOP — before every git commit call, including every commit in a multi-commit split. Do not call git commit until this gate returned "Commit" for this specific message. A multi-commit session does not carry one approval across commits — each commit gets its own gate — except when "Auto-commit all" gating was chosen (multi-commit-split.md § 1): one upfront approval of the full numbered commit list covers the whole split; do not re-ask per commit.

Execute commit with HEREDOC (safe for quotes and multilines):

git commit -m "$(cat <<'EOF'
<message>
EOF
)"

6. Error Handling

Pre-commit hook failure:

1. Show full error output
2. Ask user (AskUserQuestion):
   • "Fix issues" → fix the issue, create NEW commit (never amend on failure)
   • "Skip hooks" → HUSKY=0 git commit ... or git commit --no-verify
   • "Cancel" → cancel

Hook bypass warning:

⚠️ Hooks are being bypassed. This can cause CI failures.

Other failures:

• Empty commit → "No staged changes. Use git add first."
• Lock file exists → "Git is busy (.git/index.lock). Wait or remove the lock."

On success:

git log -1 --oneline

7. Push Option

STOP — for a single commit, ask this after it succeeds. For a multi-commit split, ask once, after the last commit in the split — never per-commit (this applies regardless of which Step 5 gating mode was chosen). Do not silently end the turn without this gate.

After a successful commit, ask with AskUserQuestion:

• header: "Push"
• question: "Do you also want to push the changes immediately?"
• options:
  • "Push (Recommended)" → execute git push
  • "Skip" → done, show success output

Push error handling:

• No remote configured → show message, skip push
• No upstream set → rerun as git push --set-upstream origin <branch>. This is the normal first push of a feature branch, not a failure: do the rerun, then report the push as succeeded and say the upstream was set.
• Push rejected (behind remote) → suggest git pull --rebase first
• Auth failure → show error, suggest checking credentials

Push success output:

✅ Pushed to [remote]/[branch]

8. Amend Safety (ONLY if user asks)

Only allow amend when ALL conditions are true:

1. User explicitly asks for amend
2. Previous commit was made by you (check: git log -1 --format='%an')
3. Commit has NOT been pushed to remote (check: git status shows "ahead")
4. It is NOT a recovery from a failed commit

When in doubt: Create a new commit, never amend.

Output

Success:

✅ Committed: <type>(<scope>): <title>

   [hash] on branch [branch-name]
   [+X -Y files changed]

Error:

❌ Commit failed: <reason>

   💡 <suggested fix>

Hook skipped:

⚠️ Committed (hooks skipped): <type>(<scope>): <title>

   [hash] on branch [branch-name]